Why are my webpages not looking right or my personas not working as they were?

I opened up my browser yesterday and no matter where I go on the web, the pages don't look right. The graphics are off. I can't even see my yahoo mail. It loads, but I see no words or graphics. My Personas is actually rotating, but all I get visually is a color, no graphics at all. I have tried uninstalling and reinstalling twice to no avail. I'm not sure what to do now. I can use Explorer without any graphics issues, but I really like Firefox much better and would like to get this issue resolved.

In FCE make sure nothing is selected in the timeline before exporting
In the Chapter Marker submenu do NOT erase the <Chapter> slug; it doesn't show up in the chapter title but it must be there
When exporting from FCE try exporting as DVD Studio Pro markers (if it gives you that option) just for a change
In iDVD I believe there is a Preference setting to make sure it recognizes chapter markers; check for that

Similar Messages

  • Why are my alerts not working?

    Why are my alerts not working?  Sometimes the alerts work and other times I have to manually retrieve messages.

    You can set alerts at verizonwireless.com, and you can set alerts on most smartphones as well, and those can be highly customized as to when you are alerted.
    Go to settings, data usage, and there are/should be options to view, limit, and alert you as to your mobile data usage on the phone itself.

  • Why are my films not working :L

    why are my films not working the soung is all out off place and it is doing my head in can some one help me :L X

    Welcome to the Apple Community.
    Licensing, in a word. The movie studios will not allow Apple to add movies to iTunes in the cloud.

  • HT1665 Why are my contacts not listed ?  They used to be there.

    Why are my contacts not listed?  They used to be there.

    I had the same thing happen to me.  It's a bug in iPhoto 9.4.2.
    The first time you run iPhoto after upgrading to iPhoto 9.4.2, it "updates the iPhoto library".  This sometimes tickles a bug where iTunes can see all your iPhoto albums, but iTunes thinks they are empty.  Since iTunes thinks all your albums are empty, it dutifully deletes any photos from your synced iOS devices.
    It's easy to tell if this is the problem you are seeing.  Open iTunes and go to the photos sync panel for one of your iOS devices.  If you have multiple albums checked, but iTunes shows a total of 0 photos, then you have the problem.
    I spent an hour with an Apple Genius.  he couldn't find any mention of this problem in their internal support system.  His recomendation was to reinstall the operating the system.  I suspect that this won't solve it.
    The only solution I have found is to restore iPhoto 9.4.1 and the corresponding iPhoto library from your backups.
    I would refrain from upgrading to iPhoto 9.4.2 until Apple has a fix for this issue.

  • Why are my floats not working?

    Hi!
    Once again, I'm puzzled!
    Here I have two examples:
    http://www.doktorwear.com/test/tuotteet.htm
    http://www.doktorwear.com/test/tavalliset.htm
    On the first one, the floats for the divs that contain the images are working great.
    But on the second one, the images don't float at all.
    What puzzles me the most is that on both pages the images should have the same css applied to them (I actually made the second link by saving the first page with a new name), yet on the first example everything works but with the second link, nothing floats.
    It must be something obvious, but I can't figure it out!
    Any help will be highly appreciated!

    You might also consider using a class rather than an id on each of those wrapper divs.
    These two selectors:
    .product_wrapper_left{
         width:200px;
         float:left;
         margin-left:50px;
    .product_wrapper_right{
         width:200px;
         float:left;
         margin-left:50px;
    could replace all those ones with ids.
    btw, I am not quite sure that you need to alternately float left/right. This ought to work easily simply floating them all left, using just the first class above.
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • HT4623 Why are my sounds not working?

    Why are my sounds for my messaging, facebook and mail not working?

    Hi PMorgan,
    Go to Settings>Sounds - go to the bottom of the screen, and make sure your Lock Sounds and Keyboard Clicks are turned to "On". Also, if they are already on that setting, turn them off and back on again to see if that fixes the issue.
    If it doesn't, then reset your iPad (no data will be lost). Press the Home and Power buttons at the same time and hold them both down until the Silver Apple appears. After the Home screen comes back up, see if your issue is resolved.
    Cheers,
    GB

  • Why are moving menus not working in build?

    Recently, whenever I've tried creating a moving menu by putting tracks into drop zones, the project simulates fine, but the menus don't work when they're built. I've checked the VOB files and the problem is definitely there – it's nothing to do with the player.
    Today I created a simple project by automatically creating chapter menus and using several of the Apple templates, to create three menus for three tracks. The only elements I imported were three video tracks and their accompanying audio tracks. None of the menus works when built: one of them (using the 'City' template) is completely blank, in one ('Leader') the template's moving background doesn't work, but the clips in the buttons work, and in the third ('Filmstrip') the button highlights work, but the buttons are blank where the clips should be.
    I've also tried creating my own moving menu design, using drop zones that I've made, and the same thing happens. Yet in a previous version of DVD Studio Pro I've created similar menus that work perfectly.
    Has something broken in vsn 4.1.0? Anybody any ideas why this is happening.
    PowerBook G4 15 Al   Mac OS X (10.4.6)  

    its not you. I have the same issue and also attempted all the same troubleshooting techniques. Help!!

  • I just got My iPad 2 for a few days ago but why the charger is not working, how they are going to replaced it with a new one ? ?

    Please be informed me... with my battery or charger problems....
    my iPad 2 charger is not working....
    since I've got it for five days ago, I only use it for three times....
    Are they going to replace it with a new one ?

    Most likely yes. There's a manufacturers warranty against defects for a year. I'd contact your place of purchase and talk to them about it.

  • TS1559 why are 4s's not working with new software and apple won't come good

    I have a iphone 4s with the new update is making my phone slow and the wifi is not working. 200.00 to fix it. I have apple laptop, desktop, 4 iphones two 4s and two 5c's and they will not fix what their update did to my phone. Any feed back to help resolve this would be appreciated. I put it in the freezer( an online solution), restarted it to factory settings, reset my wifi and nothing everyone one says there are many 4s's that are doing this since the new software. Sounds like they just want you to buy new phones and my contract is not up for one year with my provider, I am very frustrated and disappointed.

    burkey7669 wrote:
    I put it in the freezer( an online solution),
    No intelligetent person puts electronics in the freezer.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  If none of this resolves, then the device should be taken to Apple for evaluation.
    If Apple determines the device has suffered a hardware failure, they will either replace under warranty (if under warranty) or offer an Out of Warranty replacement.
    So what exactly is the problem?  They offered an Out of Warranty replacement for the defective device.

  • Why are some Hyperlinks not working in FF but do work in IE

    when I open any website,especially ones like Screwfix and it says click to enlarge, nothing happens yet if I click on a link to another page it goes there or if it is a link to further down the text.
    it also happens on a banking site . in the header it has 'help' this does not work,yet if I go to the help in the body of the site and click on help it goes there. all these sites work OK in IE. this has only started since I updated to 3.6.

    Thanks Carolyn
    Hopefully Kurt Lang will update the encyclopedic tome on font management that Tofer is riffing
    The key here is that something in Lion is corrupting the font cache for Safari. One could jump ship and simply use Firefox or Chrome and wait until AAPL fixes Safari or whatever is causing the issue. I was thinking that finally letting FontAgent Pro start managing the System Fonts might do the trick but there's a bug there that won't let me authorize the caper. So, now I gotta engage Insider over that issue.
    What I might do is to see what Font Book can do for a minute…

  • Why are my browsers not working properly?

    I have Chrome, Safari and Firefox installed on my iMac but for the last three weeks all three of them are malfunctioning.  Some pages will not open at all, some will open but with no pictures.  Some of the sites mainly affected seem to be Fox News, Facebook, DrudgeReport plus others.  Has me baffled.  Thanks in advance for any insight you can give me.

    Please complete your profile, at the very least we need to know what version of OS X is installed on the computer. You can edit your profile by clicking Your Stuff in the upper right of this page then clicking Profile and edit as needed.
    If you are running SL or Lion the problem may be that Adobe Flash is not installed. It doesn't sound like you have done any troubleshooting so in Safari please click Safari-Empty Caches and Safari-Reset Safari.

  • Why are my chapters not working?

    I've marked my chapters in FCX in the correct place in the time line. Have ticked the right box while exporting file. They work fine in the preview of iDVD.
    I have four video files added to my iDVD project.
    Once burnt, and the disc is played back, when one skips forward or back chapters instead of going to the next chapter, it skips to one of the other video files instead.
    How do I get it to use the chapters I've set it.

    In FCE make sure nothing is selected in the timeline before exporting
    In the Chapter Marker submenu do NOT erase the <Chapter> slug; it doesn't show up in the chapter title but it must be there
    When exporting from FCE try exporting as DVD Studio Pro markers (if it gives you that option) just for a change
    In iDVD I believe there is a Preference setting to make sure it recognizes chapter markers; check for that

  • My facetime and imessage are not working! They were literally were working one minute and not the next!  I have reset (NOT RESTORED) my ipod, however these 2 apple apps are not working now, anyone have any idea why???

    My ipod touch seems to have a few issues, however my pre-installed and updated imessage and facetime were literally working last night, and after a breif break to charge battery (the back of the ipod was SUPER HOT) wasn't able to do facetime or imessage, and am STILL NOT today, what gives?? Any suggestions and advice?.

    Found the answer, at least for now!  Thanks to roryjt, and having to search through tons of post on imessage and facetime issues!  Changed the DNS on my ipod for my wireless network to 8.8.8.8   Not sure if it will work outside of my wireless network, but since its an ipod, not an iphone, I usually only use it in my place/on my network.  Below is a link to the thread by roryjt.
    https://discussions.apple.com/message/16674964#16674964

  • Why are my Hyperlinks not working in mail?

    i Have rebooted and am able to read my mail but nothing happens when I touch the hyperlinks why is this?

    Sorry, I can't help you with that Mac issue. See if anything here helps you: <br />
    http://www.entourage.mvps.org/troubleshoot/

  • Why are flash games not working properly on Firefox, while they work perfectly on other browsers?

    I own a MacBook os x 10.5.8 Intel core duo.
    My problem started a few weeks ago, I tried playing a flash game, first it came up that i didnt have flash, which I did, so I ran an update but I already had the latest version.
    I gave up on the games on that page and went to newgrounds.com, but turns out everytime I try to play a game the controls wont work properly on any game.
    I thought it might be my flash, so I went to chrome and played the same game, no problems, to opera, no problems, to safari also no problems. So the problem is my firefox and the flash plug in? I already uninstalled it and re installed it, downloaded it again and followed every piece of advice I could find about this, nothing works.
    I appreciate some help with this matter, I like working with firefox, wouldnt want to change to other browsers.

    Hi gorgonzola357, there are some platform-specific differences between Windows 7 and MacOSX that may be relevant.
    Have you tried disabling the new protected mode in Flash 11.3, since that feature is currently being debugged? See this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493 Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]

Maybe you are looking for

  • I just bought a trackpad and the Icon does not show up in system preferences

    I just bought a magic trackpad and went to install it on my computer.  When I go into system preferences it does not have the trackpad icon to select.  My computer is a IMac 9,1 Intel Core 2 Duo

  • I've had a problem with previewing rendered video files

    Hey guys, I'm Justin, thanks in advance. so when I render video files in fce, the video usually renders fine, but on the canvas the video just replays the first and last frame of the rendered video, making it look like a jumbled mess. but, when I exp

  • Connect by prior in disco

    Hi I have a table in Oracle which is a recursive (pigs ear) hierarchy. I want to be able to use this in disco and "wander" down the hierarchies using connect by prior and start with. Can this be done?

  • Confusion on pair type and Processing Type

    Dear Experts I have the the below doubt in TIP Table Pair type  gives the information on the how the Time pairs being generated as 0-      Non recorded Time 1-      Attendences 2-      Absences 3-      Attendences Recorded from client  Processing Typ

  • Cannot upgrade os version in Z10

    Dear Friends, For faults with the screen on my Z10, I should return the unit that I have in temporary use (Z10 too), Because my provider gave me a new one by warranty. The problem is that in trying to make the complete transfer of data through the bl