Why are not my sent emails in the SENT folder?
I use to have my sent emails posted in my Sent folder but not anymore. Why?
Two things you can try.
Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
Try re-indexing the mailbox. This can take awhile if you have a lot of mail.
Reindex messages
Similar Messages
-
I can't see the latest emails I sent in the sent items in Apple mail. Also, I am not able to see my old emails in the inbos folder. Can someone please help me out with this?
Hello Vidish,
You may need to indicate to the Mail app which folder should be used for sent messages. This can be done by selecting your 'Sent' mailbox, and choosing (from the 'Mailbox' menu) Use This Mailbox For -> Sent.
Mail (Mountain Lion): If messages aren’t stored where expected on the mail server
http://support.apple.com/kb/PH11810
Cheers,
Allen -
Firefox can't seem to save sent emails in the "sent" box
Have sent two emails today - neither will get saved in the sent box and I get an error message saying:-
"There was an error saving the message to Drafts. Retry?"
But I wasn't trying to save the email to "drafts" - I don not know if the actual email has been sent.
Could this be related to the fact that today I changed my Virus Protection from BullGuard to Kaspersky? Can't find anything on K's control panel affecting emails!
DavidWI use Hotmail, or Live Mail as it is now called. Open to your e-mail and
log in. Look for your name at the top right. Press the '''Gear''' next to
your name, and select '''Options.''' On the right side under
'''Preventing junk email,''' select '''Filters and reporting.''' From the
options, select;
'''Exclusive - Everything is sent to the junk email folder except'''
'''messages from your contacts and safe senders'''
Now and then, look at your Junk folder in case something turns up
that you want. You can always choose to add or remove e-addresses
any time you want. -
Just purchased Apple TV 2 & music videos purchased and films rented from iTunes play in 16:9 ratio and fill my 6 year old Samsung TV screen completely. However my photos and videos played by AirPlay play in the centre of the screen along with TV series purchased and played from iTunes. Why are not all played media filling the TV screen even though they are playing in 16:9 on the TV?
if the original material is not in widescreen appletv will not play it in widescreen
if it did it would mean that it had to cut off some of the image -
Why is i tunes gift card not going to email address I sent it to ?
I tunes gift card not going to email address I sent it to. Why ?
Sorry, I must have missed your last response, but can you calrify what feature do you want to use in FormsCentral? There are email receipts and email notifications. If you want the user to receive a copy of the date he entered in the form, then the user needs to enter an email address in the form and submit the form, but if you want the user to receive all responses he and others submit to a form, then it's email notification. It sounds like email receipts in your case. For email receipts to work, you need to have an email field in your form and set up Email Receipts in the options tab, by selecting the email field in the "To:" field.
-
Why can't I remove attachments from emails in the Sent items folder?
I Recently upgraded from Snow Leopard to Lion, and so far, there are at least a couple of things that puzzle me.
One is that now I don't have the option to "Remove Attachments" from emails in the sent items folder. It seems to work normally
in the Inbox and Drafts folders, but not in the Sent items. Go figure ???
Another thing that bothers me is that in Preview, when I save a screen shot, or a scan, etc., I no longer have the option of saving it as a GIF
(which, when better quality isn't absolutely necessary, is often much lower in KB or MB than a PNG or JPG, etc.. When I store lots of things as such images, I'd rather have that option.
Any suggestions will be appreciated.I have now created a smart mailbox as described above (good idea), and although I have some 50 messages in my Sent box, all with attachments (waiting to be removed so I can store the messages in the proper mailboxes), the smart mailbox is empty. So, Mail doesn't recognise these messages as containing attachments.
This led me to think that maybe Mail has been redesigned to work the way you would expect it to, at last; to contain a link to attachments instead of including them in all their bits and bytes. That would mean that the messages in my Sent box - with attachments - could be stored in local (or server-side) mailboxes without taking up extensive space.
But then I checked the size of my Sent Messages folder inside the Mail Folder in Finder, and - whoops - it's 50+ MB. So the sent messages do contain attachments all right. And Mail doesn't recognise these, since a) the smart mailbox trick says that the messages are free from attachments, and b) the Remove Attachments menu option is disabled.
I will have to wait for the next Mail update, and my Sent box will grow accordingly ... -
why are not all my songs I have purchased in the itunes store and are on my computer not on my phone? Very frustrating I purchaed almosta $100 worth of songs for a trip and they are not on my phone after continuious syncs. Do I have to pay for itunes match for this?
Welcome to the Apple Community.
Have you actually selected them to be synced to your device from the iTunes sync settings. -
why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
After updating my phone, all my old emails in the sent folder are gone. Can I retrieve them?
Try a reset by pressing and holding the home and power buttons until the white Apple logo appears.
If the issue persists, delete the email account then add it back. -
I have 10.0.3, why can I no longer export to vimeo? also, my quicktime movies are not compressed, they export as the whole file. this didn't happen before the update. do i have to now get compressor? help.
You should buy Compressor it never fails. It is a must have. I have given up using this buggy Share function and use Compressor all the time.
-
I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.
It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards. -
Hi,
why are not all photos taken with an iphone available on the icloud, even that i made some fotos at the same time?
Some of these photos are afterwards available on fotostream others not.
Thx
MarkusIf they are in photos view then they are in an event unless you have a corrupted library
How are you"merging" the photos?
most common issue is either bad sort (view menu ==> sort events) or bad camera dates
select one and show event to see the event
LN -
Mail is putting my emails in the draft folder and leaving them there even after they have been sent. This is not happening all the time, but enough that it's annoying. What gives? and how do I fix it?
It happens on both my Mac Air and my iMac. Both are version 10.7.5
-
I am not able to send out an email. I keep getting the following message: This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account. Can someone help me with this?
We need some information, starting with the email provider (eg. Google, Yahoo, Bellsouth, etc)
-
Why are not pop up message window when message type I and W
Hi All,
I am working in BADI ( me_purchdoc_posted~posted) for t-code ME21N. Actually i want show material number, material description and ABC indicator of material at saving point of PO if material is significant.
code is properly working but does not showing error message window when I am using message type I (information) or W (worming message) .
if i am using message type E ( error message )then showing message window just link Information message.
So i can no understand why are not message window pop up when i take message type I and W.
my code is that
method IF_EX_ME_PURCHDOC_POSTED~POSTED
IF SY-TCODE EQ 'ME21N' OR SY-TCODE EQ'ME21'.
DATA : wa LIKE LINE OF IM_EKPO.
DATA : VAR_MAKTX TYPE MAKT-MAKTX.
DATA : VAR_MAABC TYPE MARC-MAABC.
DATA : P TYPE STRING.
DATA : P1 TYPE STRING.
LOOP AT IM_EKPO INTO wa.
SELECT SINGLE MAABC FROM MARC INTO VAR_MAABC WHERE matnr EQ wa-matnr AND werks EQ wa-werks.
SELECT SINGLE MAKTX FROM MAKT INTO VAR_MAKTX WHERE matnr EQ wa-matnr. " AND werks EQ wa-werks.
IF VAR_MAABC EQ 'A'.
P = 'is significant material'.
CONCATENATE WA-MATNR '(' VAR_MAKTX ')' P INTO P1.
MESSAGE P1 TYPE 'E'.
EXIT.
ENDIF.
ENDLOOP.
ENDIF.
endmethod.
guide me...............Hi vinod,
thanks for reply......
yes, my requirement is to show the popup window with material number, material description and ABC indicator of material at saving point of PO if material is significant.
I find Badi to transaction me21n at saving PO. Badi ME_PROCESS_PO_CUST does not exist.
so i am using Badi me_purchdoc_posted~posted.
This Badi ( me_purchdoc_posted~posted ) is properly working But showing message "system error ( error in method po_post ) "
when I am click on OK then automatic leave from transaction.
guide me..........
Maybe you are looking for
-
I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalle
-
Photoshop Elements 5.0 Question - Barbara Brundage
I saw in Staples Photoshop Elements 5.0 after rebates the cost was $39.99. I currently have Elements 4. Disappointment because not be able to create a DVD slideshow and show on TV screen. Question: Does Elements 5.0 software as shown in the Staples a
-
import java.io.*; import java.util.*; class SalesRep{ private String id; private int areaCode; private double commission; private double sales; SalesRep(String i, int a, double c, double s){ id = i; areaCo
-
Error starting up Portal 4.0
I get the following error when I attempt to start up the Portal (/local/bea/wlportal4.0/config/portalDomain 393 # ./startPortal.sh) Starting WebLogic Server .... The WebLogic Server did not start up properly. Exception raised: java.lang.IllegalAccess
-
How to manually add custom code snippets to Xcode?
I have a lot of code snippets made for programming. In the past, when I used MS Visual Studio , I could simply add my own snippets , but in Xcode I can't find where to add custom codes.