Why are people telling me I'm sending Blank emails?

Lately I've been getting lots of replies to my emails that say: Did you intend to communicate something? The message you sent was blank.
Sometimes I've forwarded, sometimes I replied to something I was sent, sometimes it's an original email.. and it doesn't ALWAYS happen. Any ideas why?
Any assistance appreciated..
eMac   Mac OS X (10.4.4)  

I have a similar problem:
I have two e-mail account providers, one of which is dotmac. In addition to my own dotmac account I have purchased an additional email account for a friend of mine who has an Apple laptop but is not too computer savvy.
I run OSX 10.4.4, he runs 10.3.9
As part of iChat and dotmac in Tiger, I get the facility of generating a Public Key encryption 'thing' which enables two Tiger users to iChat securely. The generation of this key also appears to enable a 'Security' option, in that all my emails sent from the dotmac account have the option of being 'Digitally Signed' i.e. verifiably sent from my computer and not spoofed. If the receiving person to whom I send an email also has a Public Key then our email communications can be encrypted so that no one can read the communication if it is intercepted.
The long and short of it is that when I send a digitally signed email to other people, all is fine EXCEPT my friend who has a dotmac email account subsidiary to mine. The content of the email is blank.
The workaround is to make sure I do NOT digitally sign emails to this friend. Whether it is because he uses an account subsidiary to mine, or doesn't use Tiger, I don't know.
If anyone can elucidate further I'd be most happy.
Regards, Dan - London

Similar Messages

  • Why are people asking for certain model numbers

    why are people asking question such as this ? Hi I was wondering if you could send me the model number of this item I am looking for a specific Model and want to make sure before I bid. The model I'm looking for is G3 the model number will start like this CGN5

    Go to this link and you will see that WRT54G/GS models from version 1 to version 5 are diferent if you look at the amount of RAM and Flash they contain.
    More RAM and Flash is better of course.
    Click here.
    (Mod note: Link edited to prevent the page from stretching.)
    Message Edited by surix on 08-08-2006 06:23 AM
    Message Edited by twenty3 on 08-08-2006 06:30 AM

  • Why are some of the messages i send in a blue background while others are in a green background?

    why are some of the messages i send in a blue background while others are in a green background?

    Blue = iMessage...
    Green = Text message... SMS

  • Why are people so crazy about XML publisher?

    Why are people so crazy about XML publisher? Maybe there are things I am not aware of, but with the exception of adding the ability to export to Excel from EBS, or having a template for a letter in which a few things will change from copy to copy, I don't see a huge advantage to using it.
    Reports is such a powerful tool and creates so much flexibility in creating graphical documents. Things that are so easy to do in reports, from my experience, is extremely difficult to impossible in XML publisher. In publisher, you have to do a lot of logic yourself that reports would do for you just by saying Yes or No to a property.
    When I first learned about XML publisher, I was really excited about learning to use it. But when I saw how difficult it is to do simple tasks, and how much you have to reinvent the wheel, I became really disappointed. There are lots of examples on the web about how to do this or how to do that with it, but honestly they seem to show you how to go to a lot of trouble to accomplish something that is easy in reports.
    People seem to want to avoid bitmapped reports like the plague, but I think they are extremely underrated.
    What do you guys think? Am I missing something? I would like to hear other opinions and perspectives.
    Thanks,
    Kurz

    Hello Kurz,
    BI Publisher (XML Publisher)
    - can use any relational DB
    - can easily be connected to Oracle Applications (Siebel, JD Edwards, ...)
    - Templates can be edited by users
    - more output formats
    Have a look at http://www.oracle.com/technology/products/xml-publisher/docs/BI_Publisher_for_Apps.pdf
    or the product home at http://www.oracle.com/technology/products/xml-publisher/index.html
    Regards
    Marcus

  • Why am I suddenly sending blank emails from my ipad third generation. The emails are received but nothing is in them.

    Suddenly I seem to be sending blank emails to everyone from my third generation ipad. They receive the email but nothing is in it yet if I look at my sent mail it appears there. What happened?

    Hi, ybg, and welcome to the Community,
    Your detailed report (thank you) indicates to me your account has been compromised a second time.  Change your Skype account password immediately if you have not already done so, as well as that of any saved payment method on file.  I would also run a maintenance cycle on your computer/laptop, ensuring all patches and updates are installed.  Also run your preferred anti-virus/malware/spyware suite using the most recent virus signature files available.
    You are right to contact Skype Customer Service to report this incident.  I have read that people experience problems reaching them, however please do continue to do so, choosing a different path through the various steps than you used the first time; try also using a different web browser.  I have also read that the instant message chat sessions with Customer Service agents appear as a pop-up dialogue box, which needs to be enabled or the connection to the agent will not process.
    Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
    As a general proactive precaution, I would recommend reviewing how you access the internet, particularly seeking any vulnerabilities or patterns common to the first incident and this one.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Why are egreetings telling me I need Adobe flash player when I have already downloaded the app?

    Why are egreetings telling me that I cannot view a card because I haven't got Adobe flash player when I got the app from the store recently, I am new to the iPad and being a silver surfer I could be doing something wrong. Please help.

    There is no Flash Player for the iPad. I don't know what you downloaded, but if it was from the iTunes Store, it wasn't Flash Player. If you search this or the Using iPad forum for "flash", you'll find a number of suggestions as to alternatives to Flash Player, such as Puffin, but whether any will work with the card site you wish to use I can't say; none of the solutions work with all sites.
    Regards.

  • Why are my exported files not going to me email?  I have used 3 different ones.

    Why are my exported files not going to my email (receipts & business card)?  I have used 3 different ones...2 yahoo and 1 hotmail.  I have checked spam box also.

    For the Receipts app I chose to export the info as a PDF file..an email was requested..I entered info and clicked send.  For the Business Card app I chose Send, not Print..an email was requested..I entered info and clicked send.  I haven't received anything, not even in my spam folder.

  • On my mac why does it take so long to send a Email with an attachment, on my mac why does it take so lone to send a Email with an attachment

    on my mac why does it take so long to send a Email with an attachment, on my mac why does it take so lone to send a Email with an attachment

    It depends on the size of the attachment and the speed of your internet connection.
    Next time you send an email with an attachment do these two things:
    In Apple Mail (I assume you are using Apple Mail), under the Window menu select Activity. Arrange the Activity window so you can see it.
    Then open the separate application located in the Utilities folder called "Activity Monitor" and arrange it so you can see it at the same time as the Activity window in Mail.
    In Activity Monitor program, select the tab labeled "Network." Watch the "Data sent/sec" portion. Then send your email, while watching the Mail Activity window and also the Activity Monitor program window Data sent/sec area.
    You should see the mail being sent with a progress bar in the Mail Activity window and also you should be able to see how many bytes/sec or KB/sec or MB/sec your internet connection is giving you in the Activity Monitor window.
    Example: my internet provider gives me about 20 Megabits per second download and 5 Megabits per second upload. To convert these to Megabytes per second (Activity Monitor shows things in bytes, not bits), simply divide by 10 (not the exact thing to do, but close enough). So I get 0.5 Megabytes per second upload speed. When I send a file that is 5 Megabytes in size, it takes about 10 seconds if I am getting the full upload bandwidth. If I am getting less than that (which sometimes happens), it will take proportionately more time. Either way, you can see what is happening with these two windows.
    If your internet provider is supposed to give you, say, 5 Megabits/sec upload (0.5 Megabytes/sec), but you see only say, 5 KB/sec (=0.005 Megabytes/sec), sent in Activity Monitor, then your emails are taking a long time because you are getting only abut 1/100 the speed you should be. You might want to check with your internet provider about that.

  • Boot loop... why are people experiencing this?

    I've noticed that many people seem to put together a new sandy bridge computer and experience a boot loop.
    my question is why are they seeing this happen? (asking out of pure curiosity)
    improper install of cpu, psu, or bent pins?
    I ask this because many people will write a bad review for whatever the company in question is. But a quick google
    search and it seems like people across the board can get the same error regardless of manufacterer.
    just seems odd to me as I built several sandy's now and never seen it in person. 

    Quote
    just seems odd to me as I built several sandy's now and never seen it in person.
    :D The problem here is, that usually only people experiencing problems post. How many, like yourself, have not experienced boot cycles, or have managed to analyse and fix it themselves. We don't know.
    That said, all those that I have had contact with that have not had issues, have followed some basic steps, i.e. reading the manual, start with 1 Ram module, ensure that XMP is disabled for a start, only add the bare minimum, ideally assemble outside the case initially, re-check CPU seating/pin imprints etc. A basic conservative approach in the initial set-up will probably halve the amount of problems experienced.
    But its good to hear of people that do feedback to state their success with setting it up. Also see https://forum-en.msi.com/index.php?topic=146761.0
    We appreciate your positive information.  

  • My attachments are not showing up when I send an email

    When I send an email with an attachment, people tell me there is not an attachment, but I can see if on my end.

    jenfromthornton wrote:
    It happens with all different types of attchments and I have tried to resend.  It usually only happens when I send am attachment from my work email address to another employee.  Do you think that means its our work server removing the attachment?
    I think that's a good possibility. Has it ever happened between home email addresses? To troubleshoot this, you need to keep track of one attachment, who it was sent to, and where, then try that same attachment from/to another location.

  • Why does it take so long to send an email?

    Hey all
    When sending an email using my business domain address, my iPhone 5 takes AGES!  Anyone know why?
    Thanks

    That sounds like a good question for your business IT support department.  Most likely, it is using Exchange, and trying to connect with an incorrect server name/IP address, and it has to wait for that to timeout before it re-tries with the correct server information.  It may also be due to security settings, or several other possibilities.  Your business IT support team should have a better idea how to configure your email than we will.

  • Sending blank emails

    My colleague has a problem with her email - when she emails someone with an attachment, the main email text disappears, as if she's sent a blank email.
    It only seems to happen when she emails certain addresses, and even then not all the time, but we're tried changing the font and selecting plain text format, and it doesn't make any difference.
    Messages without attachments are fine, and forwarding or replying with attachments is mixed, but whenever she starts the email and sends it to certain addresses the emails arrive blank, but with the attachment.
    She's on OSX 10.9.1 and using Mac Mail 7.1
    Any ideas?

    First Welcome to the Discussions.
    These 2 links may or maynot help but I think are well woth having a look.
    I would first go to your Balck Apple and make sure there are no Updates available for your Software.
    http://support.apple.com/kb/HT6030
    Followed by reading this 2nd link very carefully and see if this may show your issue.
    http://support.apple.com/kb/TS3276
    Cheers
    Don

  • Outlook automatically sending blank emails

    My Outlook is automatically replying to my emails with a blank message. My autoreply is turned off. I have changed my password and done a virus scan with no luck in reversing this problem.

    Hi,
    Which version of Outlook are you using?
    Does this issue happen to all emails you received?
    Does this issue continue if we receive emails from webmail site?
    Please make sure you don't have any rule set to automatically send out emails. To check this, click Home tab > Rules > Manage Rules & Alerts, and then check if there is any related rule in the rules list.
    If you installed any third-party add-in, please also try to temporarily disable the add-in and then test the issue again. If you have a virus scanner installed, please note that it may integrate itself with Outlook, which may also cause this issue. Please
    contact the virus scanner support and disable the integration into Outlook to see the result.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Hotmail sends blank emails

    Anyone have a problem with Hotmail on the Razr Maxx? Sends blank e-mails through hotmail...no text appears in body of message. Love this phone except for this issue...

    The same is happening on my droid. I tried to remove the email account and re-install, but did not help. Hope someone can post a fix soon. I am getting emails, but unable to respond as everything I send through hotmail will arrive blank.

  • I have silverlight why are you telling me to download the pluggin?

    ''duplicate - locking - https://support.mozilla.com/en-US/questions/901798''
    I just tried to look at Netflixs. At first your site told me to download flashdrive which I have the latest version. I went back in to bring up netflix again and now your site is telling me to download microsoft silverlight. I have that to and the same version you are telling me to down load. Why am I having all this trouble? Your sight use to be perfect. What is up with that and how does it get corrected?

    Check the age of the files you wish to open.
    Keynote 6 (the latest you downloaded) will opne Keynote 5 (KN09) files but nothing earlier. For that KN5 will act as an intermediate format (you save KN4 and earlier as KN5), then KN6 can open the resultanr files.
    Make sure you have a backup of your original files, in case KN6 cannot replicate some of your earlier builds and transitions.
    Les

Maybe you are looking for

  • Don't get timecode via firewire from FCP to Panasonic HVX200A for DV.

    When I try to 'print to video' or just play the timeline for a NTSC DV sequence, I get video and audio on my Panasonic HVX200A camera, but no timecode. The timecode display on the camera doesn't move and when I 'Log and Capture' the video that I just

  • Track Moves Back 1/16th Note

    I will record something without any problem or signs of latency while recording, but as soon as I stop recording an audio track it will automatically move backward exactly one 1/16th note. It does not do this with midi. The changed occured while I wa

  • Which sw comp. should be set 'modifiable' (SE03) to edit objects in SOLAR01

    Hi, our SM7.1 is globaly set to modifiable but the Software Components and Namespaces in detail are set to 'not modifiable in SE03 When we try to upload Documents in SOLAR01, we get the error 'System setting does not allow changes to be made to objec

  • Wildcard search with catsearch on Oracle 10g

    Wildcard search problem is being discussed many times, however the solutions provided did not solve the problem. I am using catsearch to take its advantages and return results at a faster rate. Aim is to simulate a like '%abc%' using catsearch in 10g

  • Middleware Adapter objects

    Hi experts,                   i am working on CRM 5.0. i need to create a customized business Adapter (for replicating relationships)object to download a custom table from R/3 to CRM (Z table replication).But i am unable to create Business object in