Why are plug-ins suddenly blocked

This didn't use to be a problem...  Any ideas?

There was a flurry of Malware that came through, and a lot of things got tightened up.
If you want help, make sure you have the latest versions, especially Flash, and be sure to download Flash ONLY from here:
http://get.adobe.com/flashplayer/

Similar Messages

  • Why are plug ins blocked in Safari?

    Why are plug ins blocked in Safari?  Plug ins were allowed until I updated Adobe on Sunday March 22, 2015.  
    MacBook Pro 5.5
    Mac OSX
    version 10.6.8
    processor 2.26 GHZ Intel Core 2 Duo
    Memory 2 GB 1067 MHZ DDR 3
    Thank you

    There was a flurry of Malware that came through, and a lot of things got tightened up.
    If you want help, make sure you have the latest versions, especially Flash, and be sure to download Flash ONLY from here:
    http://get.adobe.com/flashplayer/

  • Why are plug-in being blocked?

    Flash player will not work, despite it being successfully loaded

    Assuming you are using Safari go to:
    Safari-Reset Safari-check all boxes and reset, then test.

  • Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

    Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

    "Catalog"?  Are you referencing Ps Elements perhaps?
    Wrong forum.  We do not do Elements here.
    Here's the link to the Elements forum:
    Photoshop Elements

  • Where else are Plug ins stored and throwing things away

    Hello All,
    Last year I had purchase Dot Pixels and i installed it in the Applications>AE>Plugins folder.  I got an email to upgrade to the lates version.  It warned to remove the old version before installing the new one, which I did.  However, with the new version the computer did the installation.  Unfortunately, its not working properly, its showing up as a trial version, so I would like to remove it, but its not in the Plug ins folder like the old one was, and when I "Search" for it nothing shows up.  When I type in Dot Pixel in the Effects and  Preset panel, its located in a folder named RowByte.
    Where is it located so that I can trash it.
    Since I cleaning tihs out and I love throwing away things to reclaim disk space, I noticed  in my HD>Library>Application Support folder a Final Cut Pro and a Final Cut Pro System Support folder, I dont use Final Cut, don't intend to use Final Cut and I don't know where or how Final Cut got to be anywhere on my machine, is it ok that I trash them and any other applications that I do not use and have folders in there.?
    Thank You in Advance
    on a Mac os 10.6.8  using AE from the CS4 suite

    There are plug-ins that get installed in the Library>Application Support> Adobe> Common> Plug-ins folder.
    I wouldn't mess with the Final Cut folders. They contain things like apple codecs for ProRez and Apple Intrmediate. They are good for you....

  • After adding plug-ins to block ads, my firefox no longer opens--it hangs/freeze--i have tried to restart, even deleted firefox and downloaded a new version--to no avail! please advise--

    Last night I aded a few plug-ins to block ads including Google's--after restarting my computer (Mac OS X 10.6.8), my firefox no longer opened, i.e. it hangs/freeze when I open it--I have tried to restart, open in safe mode, even deleted firefox altogether and downloaded a new version, to no avail! Please advise! I have been trying to revive Firefox for hours today--

    Hey rumon,
    Have you tried starting Firefox in Safe Mode? Hold down "option" while Firefox is starting up. If the crash doesn't happen in Safe Mode, you should read [[Troubleshooting extensions and themes]].
    There is also a lot of useful stuff in the [[Firefox crashes]] Knowledge Base article. If you've recently upgraded, you might want to check out [https://support.mozilla.com/en-US/kb/latest-firefox-issues#w_firefox-crashes-when-i-start-it this article] as well.
    Hopefully this helps!

  • Clearing cookies, cache and what are plug ins?

    Greetings,
    I followed a post here from SANIBEL explaining how to successfully clear my cache. Then to clean out the cookies under the Security tab of Preferences by clicking on REMOVE ALL WEBSITE DATA. I then clicked on DETAILS and see that there are still lots of "PLUG-INS" there. Is it necessary to also remove them, i.e. will they also perhaps contribute to interference and if so, must I remove them manually?

    Those are cookies you see not plug-ins.
    Root and user plug-ins are stored in:     /Library/Plug-Ins   and    ~/Library/Internet Plug-Ins
    Plug-ins or extensions are add ons that can enhancet the way you use a browser.
    This is how to clear the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.

  • Are plug-ins downloaded from the web safe?

    Macworld newsletter just sent out an article about the most useful Safari plug-ins (http://lm.macworld.com/t/1158383/7026212/108592/0/). How do you know if it is safe to install a plug-in that sounds very useful but has been downloaded from the web?

    Hi Mike --
    The only extension I've heard of having problems is Safari AdBlock, which I did not
    on that list. I would trust MacWorld about 90% of the time. You can always delete them
    if they don't work out. I would also trust their site for downloading.
    Hope this helps.

  • Most of the plug-ins suddenly stopped responding with Photoshop CC.  Any suggestions ?

    What can I do to "revive" plug-ins in Photoshop CC?

    What document? what layer? what tool settings? you need to provide more info. Most likely you have simply changed a setting somewhere.
    Mylenium

  • Why are my photos suddenly in JPEG format when taking them from camera card to IPHOTO - which then wont let me download into a file! Help been doing this for years and something has suddenly changed in the last 2 days to my camera? or IPHOTO??

    I am away for a year and have been downloading pictures from my camera - a FUJIFILM EXR compact for the last 15 weeks into files on my mac using IPHOTO no problem...suddenly in the last 2 days I have tried to do this and IPHOTO opens the pictures ok but wont downoad them as they are now JPEG?  have I switched something over inadvertently or what - help please!!!!  many thanks

    sorry maybe Im not making my issue clear...thanks for answering anyway:
    over the last years- but 15 weeks specifically I have downloaded photos from my camers card- putting it straight into the apple mac and then opening IPHOTO then i am able to click and put the pics into my folders in IPHOTO but as of 2 days ago - the camera card went in, the pics opened BUT there is an error message which states iphoto cannot save them to file......as they are JPEGS
    I can see that others too have had this issue and there are 'answers' but I am a complete novice and cannot understand the answers given and need someone to 'hand hold me' through a step by step this is what you must do....
    so hope that now is cleared as to why there is a 'problem'
    hope you can still help me thanks for you time

  • Why are my slices suddenly visable?

    Hey folks. I was wondering if anyone could explain (and remedy) why the slices on my home page are suddenly visable. For the last four years they weren't. And oddly enough, with one browser (Safari) they're still not visable, but with other browsers they are. Mainly the horizontal slice lines on my home page. Please take a look:
    hhttp://www.toilgirls.com
    I guess I'm wondering if I accidentally allowed my slice lines to be visable.
    Thanks very much in advance!
    Les

    Looks like the image coverart_22.jpg is to large for the cell its in .... forceing the table to grow larger and therby making "gaps" in the table cells so the slices show.
    There are 2 easy fix ...
    1. cut some px of the bottom of the coverart_22.jpg (50-100px) and give the cell its in a valign="top" so the image stays at top of the cell
    40. <tr>
    41.      <td colspan=3><img src="images/coverimages/coverart_01.jpg" width=440 height=298 alt="" valign="top"></td>
    42.      <td colspan=2><img src="images/coverimages/coverart_02.jpg" width=489 height=298 alt=""></td>
    43.      <td rowspan=15><img src="images/coverimages/coverart_22.jpg" width=79 height=1080 alt="" valign="top"></td>
    44.      <td><img src="../../../Users/brianclarke/Desktop/ToilGirls%20Site/toilgirls/images/spacer.gif" width=1 height=298 alt=""></td>
    45. </tr>
    btw: i see you have align middel and top in your code... i know GL alows for this but thats actualy wrong
    You only use align for directions left, center, or right.
    You use valign for directions top, middle, bottom, or basline.
    2. Insted of cutting the image you merge the containg cell with the cell udner it and therby make room for the image inside it. by setting the rowspan to 16 + using valing="top" on the cell and remove the <td></td> in line 108
    40. <tr>
    41.      <td colspan=3><img src="images/coverimages/coverart_01.jpg" width=440 height=298 alt="" valign="top"></td>
    42.      <td colspan=2><img src="images/coverimages/coverart_02.jpg" width=489 height=298 alt=""></td>
    43.      <td rowspan=16><img src="images/coverimages/coverart_22.jpg" width=79 height=1080 alt="" valign="top"></td>
    44.      <td><img src="../../../Users/brianclarke/Desktop/ToilGirls%20Site/toilgirls/images/spacer.gif" width=1 height=298 alt=""></td>
    45. </tr>
    105. <tr>
    106.     <td colspan=2><a onmouseover="changeImages( /*CMP*/'coverart_20',/*URL*/'images/coverimages/coverart_20a.jpg');return true" onmouseout="changeImages( /*CMP*/'coverart_20',/*URL*/'images/coverimages/coverart_20.jpg');return true" href="links.html"><img src="images/coverimages/coverart_20.jpg" name="coverart_20" width=193 height=70 alt="" border="0"></a></td>
    107.     <td colspan=3><img src="images/coverimages/coverart_21.jpg" width=736 height=70 alt=""></td>
    108.     <td></td>
    109.     <td><img src="../../../Users/brianclarke/Desktop/ToilGirls%20Site/toilgirls/images/spacer.gif" width=1 height=70 alt=""></td>
    110. </tr>

  • Why are the colors suddenly negative?

    The colors on my iMac g4 10.4.4 are suddenly inverted...they look like photo negatives..I've tried to change it back in System Preferences and by shutting down and restarting but nothing helps...the colors are still all wrong...there must be something simple to change them back to normal but I don't know what it is..any help would be greatly appreciated.

    If you want to know the reason why open System Preferences then click on Universal Access. Go down to Display and you will see options for Black on White and White on Black.
    These can be set with a set of key commands, which you must have hit once by mistake (sounds odd but I did it once myself so I know it can happen).
    If you want to make sure it doesn't happen again in System Preferences go to Keyboard & Mouse then Keyboard Shortcuts then turn off all the Universal Access commands.

  • Why are my prints suddenly awful?

    Similar questions seem to have been asked already, but here is my specific problem.
    I have until now had absolutely no problems printing with an ICC profile, allowing CS2 to colour manage. I am using ICI's Olmec satin paper in an Epson R800, with ICI's own ICC profile. ICM in the printer driver is selected, with no colour management. My monitor is regularly calibrated.
    Suddenly, when I print, the colours, particularly greens, are awful (a sort of washed-out orange-brown) - I am losing most of the detail in foliage. I thought it was a printer problem, but viewing the proof colours in CS2 gives me the same poor colour rendition - a beautiful shot turns into a horror when I select view>proof colours. So it appears that CS2 is correctly applying the profile - the print colours matching the proof colours on screen. But why the massive colour space shift (working space has always been ProRGB, but it doesn't make any difference if I change it to sRGB)? Corrupt ICC profile? I don't think so, because I uninstalled it and reinstalled the original copy.
    I would like to try and print letting the printer manage the colour - does anyone know how I can do this using the ICI profile? I have associated the profile with the printer, but I don't see how to set this in the printer dialogue box. In advanced settings, there is a profile drop-down box that supposedly allows you to use custom profiles, but the only one appearing there is 'EPSON standard'.
    All comments/suggestions gratefully received.
    Thanks
    Dave

    David,
    For all you've said, I feel you're doing the right thing, but as my suggestions were just stretching for a possible cause of the problem, I'll go back to my initial reply and ask if you're certain your profile loader is working? I don't have the Spyder software, so I'm not sure what the profile loader is for it, but if it works similarly to the Monacor EZColor software for my OptixXR, then a shortcut for it will be added to the Start Menu > Programs > Startup folder so that it is launched each time you boot your PC. It should then load the profile last created when you calibrated your monitor. If the loader is missing or somehow corrupted and thus not loading the profile, then that may well be the source of the problem.
    The fact that colors look correct on your XP desktop doesn't necessarily mean that the profile is loaded, although it does suggest that. Unless you are viewing the images in some color managed application, which XP itself isn't, nor are its image viewers, then I'm pretty certain you are seeing all images displayed pretty much as if they were not tagged with a profile themself. That is, most likely they are being shown as if they were sRGB images, and your default monitor setting (profile ignored) may already be close enoughh to sRGB to provide images that look pretty darn good. If your profile is loading correctly and if the behavior is like what I've seen, then you will observe a slight shift in colors on your monitor once the profile loader has loaded the monitor profile to the LUT of your graphics chipset.
    Also, the presence of a monitor profile in any kind of drop-down menu as in Photoshop's color settings dialog, simply means that profile exists on your system. It does not mean the profile is loaded.
    Again, everything I see you saying sure makes it look at if all should be in good order, yet just isn't for some reason. Such behaviors as that just tend to suggest a corrupt file.
    If you want to confirm your monitor profile is in fact being loaded correctly, I suggest you download this free and simple-to-use tool from Xrite, called DisplayProfile: http://www.xrite.com/product_overview.aspx?ID=757&Action=support&SoftwareID=539
    DisplayProfile is a standalone executable that, upon launch, initially shows what monitor profile is currently loaded and active. It should report to you the profile you created with your Spyder. If you select any other profile in the list that is tagged with an asterisk (indicates gamma tagged profile suitable for loading to the LUT), it will reload the LUT with that profile and you can easily see how that affects your monitors colors on-the-fly.
    Recapping what you've said here, the current process you follow is the same that you've always taken and used successfully, and nothing to your knowledge has changed? That is, you've been successfully using the R800 and the paper and profiles mentioned, with no changes that you're aware of? As you said, I'd not really expect your original Olmec profile to be corrupted as well as the copy that has been in use. If this "suddenly, when I print" became a problem only recently, then Lawrence's suggestion of reverting to a System Restore point prior to the time you first observed the problem may well be worth doing. Of course, this assumes you have System Restore active so that checkpoints are periodically created, and they span the time period in question.
    In the end, it may also be just as you last said...that a custom profile for your paper is needed. On my R1800, I've been very happy with the Espon Ultra Premium Luster, Velvet Fine Art and Ultrasmooth Fine Art papers in most cases, each with their associated Epson profiles. However, there do seem to be some images I'll print to the latter 2 papers where they seem more difficult to judge the color saturation relative to the softproof. I also now remember how I stumbled along ( http://ambress.com/photoshop/softproof ) for a while with having "Preserve RGB Colors" mistakenly enabled in the softproof settings, and that was badly affecting the softproofing of prints made to Epson Enhanced Matte and the Premium Luster...something else worth mentioning, as another time for you to check. Generally, it should be disabled as I understand things.
    Good luck!
    Daryl

  • FCP 7.0.3 why are my fonts suddenly not available?

    Hi I'm hoping someone has an answer to this:
    I just purchsed a new MacPro 8-Core and installed Final Cut Studio (FCP 7) on Lion
    It had been working fine, I had a system issue where tried to fix by providing rights to sub-folders and since I did that I have been having huge problems trying to get the Mac running again. One of which happens to be that the fonts which were accessible in FCP prior to the issue are now no longer available. in fact I had a huge collection all accessible. these are all gone. The same goes for Motion and the templates I try to open and use in Final Cut.
    Does anypne have a clue as to why this happened and, more importantly, how can I get my fonts back??
    thx
    fj
    PS. I have gone into font book and made sure all fonts are activated.

    Thx all for your help. I tried all of it. A friend suggested what Brad suggested:
    When I created a new user I found that the fonts were once again appearing as they should/were originally in both FCP and Motion. It seems that that one move to assign the rights to subfolders in my user account corrupted all of the font files. Regardless of having tried all of the various ways to fix the system caches and pref files nothing worked to get my user account and the admin account back to normal.
    But here's something I didn't expect and maybe it will save someone the hours i wasted. After I created a new account and assigned admin rights, I was still having problems with launching my Adobe applications: "Error 150:30 Licensing has stopped working..." So I uninstalled my entire Creative Suites apps and reinstalled them. This fixed it for the new user account.
    But get this: when I went back to the old "corrupt" user account, it was now working again also! Including FCP and Motion and all of the word processing and Adobe apps. I've been editing on them all day and knock on woodhead it all works perfectly again.
    Cheers f

  • Why are my browsers suddenly displaying foreign language?

    and how do i fix it. both safari and ff started displaying some content (not all) in foreign characters. for example, going to cnn.com, some article headers are no longerr english. or on wikipedia's english site, most of the content is no longer in english. anyone know how can fix this. and for the record, apple.com is still in english. thanks.

    Where are you located? I have lived in Mexico for years and have had all my sights in English, just last month all my sites defaulted to Spanish, I had to go into preferences on each program and put the default language into English. I am not sure why it started to do this, and it was a pain to go into all the programs and change it. One note though, Facebook can take several tries to default to English and it will at times revert back to Spanish when it wants. If you are in the U.S. your default should be English and I would check my internet address to make sure it is a U.S. address. Their are several sites you can go to check this. this site will tell you where your IP is from. http://www.geobytes.com/IpLocator.htm?Getlocation

Maybe you are looking for