Why are prepaid customers not supported?  Or charged extra for purchases?

Why am I punished for being a Verizon customer trying to buy the refurb SG4? I'm on auto pay with the prepaid to double my data. I'm told I have to buy the additional $45 service, or drop the autopay so it will pay which will kill my double data. Why is it I can't get the phone for the advertised price, keep my number, and continue on auto pay without paying anything extra or losing any data?

Holger Lindner wrote:
Thanks Chenks. I would subscribe to your point of view if the new AppleTV were an upgrade,
the new appletv is an "upgrade" in terms of that it is a new device to replace the original appletv.
it may not be an upgrade in terms of what you wanted, but it still is there to replace the original appletv.
as an early adopter you should always be aware that something better and cheaper is likely to be around the corner and that your early adopter investment will start to look poor. that's just the way it goes with any device.
Holger Lindner wrote:
Just thought of another counter-argument: my 2008 iMac is still running on the "old" platform but iTunes 10 and TV Show rentals work there as well ? How ?
flawed analogy really.
itunes 10 is a stand-alone application and has it own refresh cycle.
eventually you'll find that itunes itself will no longer support PowerPC apple systems, and that's just the way it goes (i'm actually surprised that apple do still support PowerPC for anything!).

Similar Messages

  • Why are these Webservices not supported in VC ?

    Hi all,
    I am using NW04s SP9, and I plan to make MDM-Application with VC.
    Therefore I introduced MDM-WebService into NW and defined it on VC.
    but "searchRecords" of "MDMSearchRecords" was displayed with "Not supported"
    in the right frame .
    Mmm...
    So I decided to think from a beginning.
    [http://www.27seconds.com/Holidays/US/USHolidayService.asmx?wsdl|http://www.27seconds.com/Holidays/US/USHolidayService.asmx?wsdl]
    I defined above it on VC and I used "Getholidaydate" .
    Good! .
    However,,, "Getholidaysforyear" was also "Not supported".
    Why are these methods "Not supported" ? .
    and how will come to be usable these methods in VC? .
    Thanx in advance.
    Regards,
    k.sugimoto.

    Hi
    Visual Composer supports Web services that are compliant with the Basic Profile 1 standard of the Web Services Interoperability (WS-I) Organization (http://help.sap.com/saphelp_nw70/helpdata/en/e0/92583ab4da4b9cb524f61ba4267d25/content.htm)
    Best regards
    Vincenzo

  • HT203088 Why are CR2 files not supported?  How do I get them to open??

    I don't know if this should go in Aperture or not.  I have some photos that I took with a Canon 5D Mark III that are .CR2 and I CAN NOT get them to open in Camera Raw.  I have updated all of my software with the exception of the adobe products.  How do I get the .CR2 files to open??? 

    Kbrian
    According to Apple the Canon 5D Mark III is supported in Aperture 3 or later
    http://www.apple.com/aperture/specs/raw.html
    I am not a Canon user - but perhaps this model also allows you to save a small  RAW file - perhaps called sRAW?
    This may not be supported by Apple
    Be aware, that although the file has a CR2 file suffix, every RAW file is unique to the model that generates it and has to be individually supported by Apple via a system level update
    Hope this helps
    Brian

  • Why are iphones now not support godaddy email?, why are iphones now not support godaddy email?

    why despite numerous attempts on numerous iPhone, does Apple not longer support Godaddy email accounts? 
    I have followed the proper methods described in Godaddy to no avail.  At this point it is clearly an Apple issue.
    Any help is appreciated. 

    Which "proper methods" have you used exactly?
    These?
    http://support.godaddy.com/help/article/8311/automatically-setting-up-email-on-y our-apple-mobile-device
    http://support.godaddy.com/help/article/3423/iphone-setting-up-email

  • HT3669 Why are Dell printers not supported?

    I have three printers and a Windows laptop and a Macbook.  I cannot connect the Dell printer to my Macbook due to now drivers from Dell or Apple.  I realize this is more of a Dell issue, but is there another driver I can use for the Dell AIO 944 printer?

    http://www.dell.com/support/drivers/us/en/04/Product/dell-944
    I see no Mac support for that product.

  • Why is Family Sharing not allowing me to ask for purchases from my mom?

    We recently got family sharing together and once my mom tried to click the thingy that says, "Turn on ASK TO BUY" or whatever, this happened:
    "Cannot Enable Ask to Buy, Ainslie is sharing purchases from an account that's also used by another family member. Ask to Buy can only be enabled on accounts that aren't shared."
    except my iPad mini uses the same Apple ID.....   How do I get it to work?!

    See the following for how Family Sharing works
    Family purchases and payments - Apple Support
    It includes
    After you set up your family, any time a family member initiates a new purchase it will be billed directly to your (the administrator's) account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card. As the family organizer, any receipts generated by the transaction will be sent to you. Learn more about how iTunes Store purchases are billed

  • When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

    When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

    TLCMediaDesign wrote:
    I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
    IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
    When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary.

  • Why does phone say "this device not supported" when charging

    why does phone say "this device not supported" when charging?

    If it is clean connect a 2nd accessory of the same kind to see if you need to replace the accessory or continue troubleshooting the phone.

  • Why do iPhones/iPad not support Flash Player/Java and what are my alternatives for browsing sites using these plug-ins?

    Why do iPhones/iPad not support Flash Player/Java and what are my alternatives for browsing sites using these plug-ins?

    There are also iSwifter, Photon, Skyfire, etc., some only support Flash some support Java and Flash.
    Adobe never made a version of Flash for iOS and closed their mobile flash division a couple of years ago. You can get Flash on other personal devices but you will be using a 2 year old version that has not been patched for security vulnerabilities.
    When the original iPhone was released Mr. Jobs said it would never run Java as it was old technology and a security risk. Nothing has changed since.

  • TS1424 why are they charging me for purchases i didn't do on the apple iTunes store ?

    why are they charging me for purchases i didn't do on the apple iTunes store ?

    You haven't made any purchases, including in-app purchases and app subscriptions ? If not then you can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Disc Burner. Why are some files not readable or writeable?

    Hello,
    I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
    "The operation cannot be completed because some data cannot be read or written.
    (Error code - 36)"
    Followed by the choices: "Stop" or "Continue".
    I have a bad feeling that my startup disk is too small but I am not sure.
    Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
    Here are the specifications:
    Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
    I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
    I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
    Here is my process (I hope I am doing this right - I am new at this):
    1. I first insert a blank DVD-R
    2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
    3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
    Why would some files not be readable or writeable?
    4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
    "Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
    However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
    Am I doing this the right way?
    Why are some files not "readable or writeable" as it indicates in the error message?
    Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
    Thanks

    To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
    Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
    Thanks Kappy

  • Why are my pictures not sending in imessage?

    Why are my pictures not sending in iMessage?

    Check out this support document http://support.apple.com/kb/ht4221

  • Keep getting accessory not supported when charging in romania.  I have a converter for wall and a att USB cord

    Keepgettimg accessory not supported when charging in romania. I have all the correct connections. ie wall converter, USB cord etc.

    If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
    If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
    With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
    So, are you able to confirm you have a working connection between the Mac and printer?

  • Why not support tree/shuttle layers for Structs/JSP in jheadstart 10.1.2.0.

    Why not support tree/shuttle layers for Structs/JSP in jheadstart 10.1.2.0.
    I want make tree style and shuttle style with Structs/JSP(jheadstart 10.1.2.0) in my project.
    Can you help me.
    Thanks for your help.

    UIX provides tree and shuttle components that generate all the complex javascript required for these UI component.
    We have no plans to create similar javascript ourselves so we can generate this with JSP. The future strategy for JHeadstart will be based on JSF / ADF Faces where we leverage UI components that have this functionality built-in, like UIX has today. With the JSF standard out there, we expect lots of sophisticated new UI components to come out, built by dhtml/javascript/ajax experts (which we are not).
    Our focus (and core competency) is on generating applications by wiring together these sophisticated UI components, and not so much on building new UI components.
    If you want to build this today using JSP I suggest you do some shopping on the internet, you wll probably find some sample code for trees and shuttles.
    Steven Davelaar,
    JHeadstart Team.

  • Secure zone - ERROR: The payment gateway that you are using does not support recurring payments

    So I want to sell a product that is made up of 4 downloadable products. (Totalling ~ 200meg)
    The only way I have found is to sell membership to a secure area where the files are linked.
    When I create the secure zone, I want a one-time-fee, but the system says:
    "ERROR: The payment gateway that you are using does not support recurring payments"
    The payment isn't recurring!
    Micah

    "Note that you have to use seamless gateway to process such payments."
    Right, but that's the problem, we're not usiong a seamless gateway and thus we get the error.  Again, the system should note that we're doing a one-time charge and not throw the seamless gateway error.
    Micah

Maybe you are looking for