Why are some (but not all) of my Muse slideshow widget images rotated differently than when I edited them in Photoshop CC?

I have a few dozen photographs embedded in the slideshow widget. Most of them appear exactly as I edited them in Photoshop, but several appear rotated clockwise 90 or 180 degrees. Does anyone know why this is happening, and ideally, how I can correct this problem? Thank you.

Please share the site url , also refer to this post and check if this helps :
Why are some of my images importing upside down?
Secondly , if you change the fill type then does that makes difference ?
Thanks,
Sanjit

Similar Messages

  • Why are some but not all of my photos from iphoto are importing into imovie?

    they are from the same camera, taken on the same day and as far as i can tell the same format.
    the ones that won't import to imovie play fine on iphoto, i tried exporting them to desktop but won't play as the file is "unsuported".
    help this is so frustrating!

    Hi, and thanks for the response.
    Ok guess my basic problem is that I don't properly understand the concept of where and how photos are copied to.
    Say I take one photo with my iPhone 5...
    - Where will this photo be stored, and where will it be copied on my phone and on my iPad, if I have the Photo Stream and the Shared Photo Stream options turned on on both devices?
    - which photo can I erase on my phone, but meanwhile still keep a copy on my iPad anyway?

  • Why do some but not all podcasts transfer to my iPod Touch

    I manually drag/drop podcasts to my iPod Touch.  If I select a set of them and drag/drop to the iPod Touch, most will transfer fine, but some will not.
    I have lots of memory on my iPod Touch
    Some characteristics of the podcasts that do not transfer:
    1) The podcasts that do not transfer cannot be transferred individually either.
    2) They play fine in iTunes.
    3) They tend to be in contiguous blocks. E.g. all prior to a Nov29 transfer, the podcasts between Nov29 and Dec 15 do not transfer, and all after Dec15 transfer fine.
    It behaves like the system incorrectly thinks that they are already on the iPod Touch, and therefore does not think they need to be transferred again.
    I have tried marking them as "played", and then marking them back to "not played" in iTunes no effect.
    iTunes 10.5.1
    iPod Touch 4th generation w/software 5.0.1

    Flash drives typically are formatted FAT and hold a very limited number of files. You can overcome this by exporting the photos to a folder and dragging that folder to the flash drive
    You know don't you that moving the photos in this way loses versions, faces etc. generally it is better to move the iPhoto library intact to the new computer (network, external hard drive, direct connection, etc)
    LN

  • The send button is greyed out when I try to text some but not all people from my iPod touch. Any ideas how I can fix this?

    The send buttin is greyed out when I try to text some but not all people from my iPod Touch. This happens even when they have iPhone 4s. Any ideas why and how I can fix this?

    This issue can be caused by the McAfee SiteAdvisor extension.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

    I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.)  It happens for about 10 of 30/40  files approximately . Thank you, Kathryn

    I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

  • Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

    I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
    - Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
      this, after normal behavior for more than a year since purchase of the iPod.
    - Different podcasts have been affected at different times, after changes in the state of the iPod.
    - Only podcasts are affected.
    - This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
    - The only change to iTunes, the Mac, or the iPod is that just before this condition began
      I’d begun syncing an iPhone via iTunes.
    I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
    I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
    So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
    By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
    As I said,  this involves only podcasts. All other content on the iPod does appear in iTunes.

    I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
    Need Help!!!

  • My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred - any ideas?

    My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?

    Rodger,
    Thank you for your gracious welcome . . .
    and thank you for your swift response . . .
    and thank you for your information (and encouragement!).
    Yes, I read that too, but searched in vain for the specifity of, say, your direction:
    "Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
    So I shall!
    Again, many thanks.

  • Disc Burner. Why are some files not readable or writeable?

    Hello,
    I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
    "The operation cannot be completed because some data cannot be read or written.
    (Error code - 36)"
    Followed by the choices: "Stop" or "Continue".
    I have a bad feeling that my startup disk is too small but I am not sure.
    Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
    Here are the specifications:
    Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
    I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
    I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
    Here is my process (I hope I am doing this right - I am new at this):
    1. I first insert a blank DVD-R
    2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
    3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
    Why would some files not be readable or writeable?
    4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
    "Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
    However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
    Am I doing this the right way?
    Why are some files not "readable or writeable" as it indicates in the error message?
    Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
    Thanks

    To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
    Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
    Thanks Kappy

  • Finder shows some but not all files in a folder

    In some circumstances, Finder only shows some (but not all) of the files in a folder. Why?
    I notice this with Excel autosave files in the Office 2011 Autorecovery folder (Macintosh HD ▸ Users ▸ Conor ▸ Library ▸ Application Support ▸ Microsoft ▸ Office ▸ Office 2011 AutoRecovery). In my case, Finder shows 34 files but "ls" in a Terminal window reports 40 files. The missing files do not start with a period (.) and have the same permissions as other files that show in Finder ([email protected] 1 <myname>  staff). Here's the last four lines of "ls -al" - the first two appear in Finder, but not the last two:
    [email protected]  1 myname  staff    55296  8 Oct  2013 Word Work File D_1239425731.tmp
    [email protected]  1 myname  staff    55296  8 Oct  2013 Word Work File D_1240072173.tmp
    [email protected]  1 myname  staff    52796 13 Feb 11:08 safe1.xlk
    [email protected]  1 myname  staff    95320 12 Mar 16:06 safe2.xlk
    I have tried copying files from this folder to another folder, and/or changing their names. They still do not appear in Finder, nor are they visible in the File Open dialog of applications, even when the dialog is listing other files in that directory - but if I manually type the name into the File Open dialog, the app manages to find and open the file.
    If I Spotlight-search for the file name, or search in Finder, without specifying that specific directory ("This Mac"), the file is not found, but if I direct the Finder search at that particular directory, then the search returns the relevant files.
    So: why does Finder hide certain files when showing a folder, even though it can find and show those files if you specifically ask for them?
    Now using OSX 10.10 (Yosemite), but I'm pretty sure I noticed this on OSX 10.8 as well.

    So simple - thanks. I'd not been aware of the hidden flag, and now I've found the -O option on ls to display it.
    Follow-on question: I now see that you can change the system-wide defaults to display hidden files with this...
         defaults write com.apple.finder AppleShowAllFiles -boolean true ; killall Finder
    ...but is there a way to specify this on a per folder basis? I'm happy enough to hide hidden files in general, but it would be nice if I could set an attribute/flag/whatever on the Office AutoRecovery directory that told Finder "in this folder, always display hidden files". Can I do this?

  • Aperture has stopped showing some, but not all, keywords on photos

    I imported some new photos today and noticed that Aperture seems to have stopped displaying some, but not all, of my keywords. I'm noticing this on a large number of my existing photos.
    For example, I've selected a photo and the Keywords tab of the Metadata pane lists: Amanda, iPhoto Original, Judy, and Zoo. That appears to be correct. However, the Keywords field in the top of the Metadata pane only shows iPhoto Original, and the only keyword displayed in the grid view is iPhoto Original.
    Switching to a different metadata display does not help, nor does rebuilding the library. Reassigning the keywords seems to help, but that's not really an option for > 7,000 photos.
    Anyone know why this is happening? Can I fix this?
    Dave
    PowerMac Dual G5 2.0   Mac OS X (10.4.7)   Aperture 1.1.2

    After poking around with BBEdit in my Aperture library, I think I see the problem. I chose a photo that Aperture won't display all the keywords and re-added them. I then compared all the files in the library for that photo with the same files in a backup library I had set aside.
    It appears that at some point Aperture got the IPTC keywords out of sync with the actual keywords on the photos. Looking at the Version-1.apversion file (which is actually a .plist file), I can see that both copies have the same keywords on them (called tags in the plist), but the IPTCProperties.keywords summary does not reflect all the tags actually on the photo. Aperture appears to just display the keywords stored in the IPTC keyword summary instead of checking to see what keywords the photo actually has.
    So, the keywords are still there, but the summary that Aperture displays is wrong and a library rebuild doesn't appear to rebuild the keyword summary.
    My options at this point appear to be either re-apply all my keywords or write a tool to fix it for me (I guess being a developer has it's perks). I'll definitely be filing a bug on this...

  • Some, but not all, albums not displayed after Yosemite/iPhoto 9.6 upgrade

    After upgrading to Yosemite and iPhoto 9.6, photos from  some, but not all, albums are missing. All albums from the previous version are listed in the Library, but 12 of 15 are showing "(0)" with no contents.
    Is recovery possible?
    iMac 21.5in (late 2009), OS X 10.10.2
    3.06 GHz Intel Core 2 Duo
    4 GB Ram
    OS X 10.10.2
    iPhoto 9.6 (910.29)

    Your best solution is to restore a backup copy of the library made just prior to the Yosemite and iPhoto upgrades.
    Otherwise try the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
    2 - run Option #4, Rebuild Database.

  • Printer just started feeding a blank page after some, but not all printed documents

    Printer just started feeding a blank page after some, but not all printed documents

    Hi @cam21 ,
    I understand that you are having issues printing, after some documents you are getting blank pages. I would be happy to help you.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    What application are you printing from?
    It may be a setting in the application.
    Does this happen from all applications?
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
    How is the printer connected? (USB/Ethernet/Wireless)
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    If there is anything else I can help you with, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • TS1424 Some but not all of my purchases from iTunes store (TV shows) have been downloading in a Quicktime format that can't be viewed via iTunes or on apple TV (1st gen).  I get error message when I try to convert.

    Since I have a new iMac and now use Mountain Lion, I am observing that TV shows purchased in iTunes sometimes download in a Quicktime format that will not open in iTunes.  In some but not all cases, I right click "open in" and select iTunes and then it will play.  However, this doesn't always work.  When I open in Quicktime and try to export to iTunes, that won't work.  When I try Wundershare's Video conversation program, it won't even accept the file.  What's going on here?  Any ideas?  Please reply [email protected] with any suggestions.
    Kathy

    Thanks for the help Ricky.
    I did put my iPod into DFU and iTunes recognized it in restore mode. After restore I am back where I was before - iTunes cannot connect because of an unknown error.
    I have installed Jailbreak to see if I can bypass itunes but haven't succeeded. I can't get my computer to recopgnize the iPod as a device.
    I'll take it to a Genius bar next time I am in the area of one. Until then I'll probably continue to try hacks to get it connected.
    Dan

  • ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs

    ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs. Setting up the connection has been a hit and miss. Have tried both x86 and x64. Any ideas?  Use ODBC from the control panel and C:\Windows\SysWOW64 same results. Using
    SQLexpress 2008r2
    Thanks

    Hello,
    Please consider to configure Windows Firewall or disable it. Not only Windows Firewall but any security software.
    https://msdn.microsoft.com/en-us/library/cc646023(v=sql.120).aspx
    Windows Firewall is enabled by default.  
    Make sure you are using SQL Server Native Client to create the ODBC DSN. Not all Windows versions have it, so you may need to download and install it.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • I reinstalled my computer's operating system.  How do I transfer music from my Ipod to my music library?  It transfered some, but not all my music.  I authorized the computer, but it did not help.

    I reinstalled my computer's operating system.  How do I transfer music from my Ipod to my music library?  It transfered some, but not all my music.  I authorized the computer, but it did not help.

    The sync is one way - computer to ipod.  The only exception is itunes purchases.
    The ipod is not a backup device.
    You need to copy everything back using your backup copy.

Maybe you are looking for

  • Is it possible to hold the HR postings in FI

    .Dear experts, could you please help me out regarding the following issue. is it possible to hold the HR postings in FI if possible send me the procedure if not give me some reasons.

  • HT203421 There was an error

    There was an error in the App Store. Please try again later. (100)

  • Error 108 when exporting in Master file

    My project is a 2-hours multicam edit. And I have this error 108 when I go to the Final Cut Pro X share menu and select "Master files" (Fichier Master" en français). After a certain period of time, an alert will appear with this number. What I don't

  • I bought Lion but haven't installed it, can I get a refund?

    My Mac is a 2009 and I use CS4 and I'm afraid after reading the reviews, there will be too many problems. I bought it because I just bought the iphone 4s and wanted to put icloud to use, but now I'm more afraid of all the headaches and problems it wi

  • Another dumb overlay question..

    hi, sorry to bother you all with a redundant overlay file question but ive scoured the forum and still cannot wrap my mind around this process and what i am doing wrong. heres what i have done, following step-by-step the lynda.com tutorial: 1. import