Why are some cells in my spreadsheet higher than others? There's like extra space.

Why are some cells in my spreadsheet higher than others? There's like extra space.

DreamLife,
you can adjust the row height byt selecting the separator between rows.  It is possible you made this adjustment accidentally.  To se the row height to be the same as other rows select a row that has the height you want:
Then open the table inspector.  Look at the row height and note the value.  Now select the row (s) you want to adjust, then change the "Row Height" value in the table inspector.  To view the inspect select the menu item "View > Show Inspector"

Similar Messages

  • Why are some of my movies not syncing while others are? All of my movies are in m4v form, and some of them sync but some of them don't.

    Why are some of my movies not syncing while others are? All of my movies are in m4v form, and some of them sync but some of them don't. Also, when i try to play my movies on my mac AND ipod, some of my movies just randomly freeze and wont let me continue watching. I dont understand why its doing this.

    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod - http://support.apple.com/kb/TS1497

  • Why are some items on itunes not available in other countries. like the book world war z by max brooks?

    ok so i want to buy max brooks novel WWZ from the uk itunes store. but i cant becuase its only available in the USA..... why is that? why are some things limited to certain countries? im gonna go to the local book store and just buy a (much cheaper) hard back copy anyway, but it genuinely makes zero sense why itunes does this. very frustrating is a understatement as this happens with music and videos also! ......

    It's the content providers decision, not Apple - the book publisher, record company, film studio have to grant Apple a license to sell their content in each country. So if the book publisher has only granted Apple a license to sell it in the US store but not the UK store, then Apple can't put in in the UK store.

  • Why are some of my photos tack sharp while others in the same series are out of focus?

    My camera is a Canon Rebel XS (dSLR) and I primarily use the 50mm f/1.8 lens. 
    I shoot in Manual Mode with Autofocus ON.
    I am having difficulty with my photos coming out incositant - some are out of focus, while others in the same series (taken a moment apart) are tack sharp.
    I've attached two examples - one of the out-of-focus image, the other sharp images (both have been blown up).
    It is not camera shake and my settings are identical for both photos. (ISO 200 | f/4.5 | 1/100sec in this instance.)
    This has become such a problem that I find myself needing to take 10x more photos of the same subject/pose in order to hopefully get one sharp image from the series.
    I have asked multiple people about this problem (though I have yet to take my camera and lens to a shop due to lack of funds) and no one has any idea of either what I'm talking about or what the problem could be.
    I would appreciate your thoughts and help!
    Thank you! 
    Fuzzy/Out of Focus:
    Sharp:

    This new pair of images does not look like camera motion -- this one looks like it missed focus.
    If you use the included Canon Digital Photo Professional that came with your camera, you can right-click an image and tell it show you the focus point which were used (the camera wont know if you did a focus-and-recompose technique... so if you recompose after locking focus then the focus points indicated by DPP wouldn't be meaningful). But I bring this up because it would allow you to determine which focus point the camera claims it used.
    I think you mentinoned that you used "One Shot" focus mode -- not AI Servo. One Shot should block the camera from taking the shot until it thinks it confirmed focus-lock on the selected AF point (or on at least one AF point it you allow the camera to pick from any of its available focus points.) In AI Servo the camera WILL take the shot when you fully press the button -- whether it successfully locked focus or not.
    That brings us back to the subject of the focus test.
    If you do not own a commercial chart, then you may want to download one from the Internet and print it. Here's a good site: http://regex.info/blog/photo-tech/focus-chart
    Print the chart and follow the instructions. I deliberately run the camera out of focus to nearest focus distance and force the camera to re-focus and shoot... and I repeat this at least a half-dozen times. I then repeat... but this time deliberately run the camera out of focus to infinity before forcing the camera to focus and take the shot.
    Track each shot as you do the focus test. You may see a pattern emerge (e.g. perhaps it nails focus when going in one direction to find focus... but misses in another, etc.) Such a pattern might indicate the lens is getting sloppy and needs service (it's usually not worth servicing the 50mm f/1.8 due to it's low cost.) The USM and STM lenses allow full-time manual focus override (even if the lens is auto-focusing). The basic auto-focus motor lenses (like the 50mm f/1.8) do not support this and forcing manual focus without disengaging the focus system can be harmful.
    Tim Campbell
    5D II, 5D III, 60Da

  • Why are some images imported as "IMG_9999.jpg" and others as "_MG_9999.jpg"?

    When importing a bunch of pictures from a Canon 5D MKIII, some of the images have a "IMG_9999.jpg" filename, and others in the same batch have a "_MG_9999.jpg" filename (the leading "I" is an underbar).  Is there a reason or fix for this other than manually creating the names?

    Color space setting.  See https://www.google.com/search?q=img+vs+_mg&ie=UTF-8&oe=UTF-8&hl=en&client=safari .
    Note these names are supplied by the camera and not by Aperture.
    Aperture allows you to change the file names of Originals on import or after.  I change mine to something useful to me on import.  Search forum for "File Naming Convention".
    (Sent from my magic glass.)

  • Why are some songs in a playlist checked an others not?

    I have created a new playlist from some of my music but some of the songs have a tick (check) mark in the box next to them and others don't.  I can't seem to either check all of the songs or uncheck the checked ones.  Does this matter?  What does it mean?  Any advice gratefully received, thanks

    I have the same issue.. seems like randomly.. some songs are unchecked by iTunes (I've never proactively unchecked any).. is this a bug?

  • Why are some channels offered on Select TV service not offered on Premium?

    We get the Premium TV Service (we're in Maryland).  The lower-priced Select service offers a number of channels that are not offered on Premium (but are offered on the higher priced plans).  We're particulary interested in the BBC chanels, but there are about 8 other channels that are offered on the lower-priced service, but not on Premium.  What is the justification for dropping channels when you pay for a higher priced service?

    and why are some shows on hd but not listed in sd (the default guide). why do some shows list 2-3 episodes one day and the next offer only one?this is across board, every channel that is watched in my household at some point in time has this problem.when wanting to watch a missed show on vod. 

  • Why are some of the loops in GB 'greyed

    Why are some of the loops in GB 'greyed out' " I'm specifically interested in 'slide guitar' for example and cant find a reason why there's no access. My iMAC was bought in April 2010??

    Court Kizer wrote:
    Would you please stop spamming every single apple garageband discussion forum with your website. It doesn't have the answers on how to force the loops to download.
    You're using the forums to spam your site in almost every single thread, and wasting users time.
    Have to disagree with you there, Court Kizer. The Bullets&Bones site is, in many ways, where I really learned how to use GarageBand.
    Take a look at the list in the Top Users box on the right. Those points are awarded by people who got their answers from the advice posted.

  • Disc Burner. Why are some files not readable or writeable?

    Hello,
    I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
    "The operation cannot be completed because some data cannot be read or written.
    (Error code - 36)"
    Followed by the choices: "Stop" or "Continue".
    I have a bad feeling that my startup disk is too small but I am not sure.
    Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
    Here are the specifications:
    Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
    I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
    I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
    Here is my process (I hope I am doing this right - I am new at this):
    1. I first insert a blank DVD-R
    2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
    3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
    Why would some files not be readable or writeable?
    4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
    "Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
    However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
    Am I doing this the right way?
    Why are some files not "readable or writeable" as it indicates in the error message?
    Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
    Thanks

    To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
    Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
    Thanks Kappy

  • Why are some of the forums locked?

    Why are some of the forums locked?  Could it be because the number of complains for service (the lack of), scams by stores - employees, placating that happens just to make a sale or general MISINFORMATION and a total disregard for their customers would question some of Verizon's tactics?
    Morally, ethically and legally questionable actions by employees with little to no accountability sounds about right?
    What say you Verizon Customers?

    Could be varied reasons. The thread is outdated, the question was answered, there are off topic attacks, there are personal attacks on forum members, there could be spam posts, or off topic posts, cross posting over and over and the list could go on.
    Hope that answers your question?

  • Why are some of the file folders on my desktop showing up with a shaded color?

    Why are some of the folders on my desktop showing up with a different folder color, a dark shad of blue, opposed to the default blue color?
    I've searched and searched but all I can find are posts on how to change the color of your folder. I am concerned that maybe, I accidentally shared it or have done something I am not aware of. (Mac Mini, 2.3 i7, 1TB, 16GB RAM running OS X Yosemite 10.10.2)

    I don't know how many photos you're trying to post on one page but if you put too many PCs using Internet Explorer may have problems loading the page.  I prefer to keep the number down to less than 50 and have more than one page which will be indicated by the page links at the top of the thumbnails:
    These smaller pages will load faster and in more browsers.
    OT

  • Why are some of the new app free for some ppl and paid for some

    why are some of the new app free for some ppl and paid for some?

    People that purchase the iPhone 5s, and the 5c get Pages, Keynote, and Numbers for iOS for free.  Also, any purchases of the new iPad models.
    More info here: http://support.apple.com/kb/HT5913
    HTH

  • Why are some of the messages i send in a blue background while others are in a green background?

    why are some of the messages i send in a blue background while others are in a green background?

    Blue = iMessage...
    Green = Text message... SMS

  • Why are some of the songs greyed out and i am no longer able to listen to them?

    why are some of the songs greyed out and i am no longer able to listen to them?

    why are some of the songs greyed out and i am no longer able to listen to them?

  • Why are some of the items in Recents colored red

    The Recents icon under Phone lists my recents in/out phone calls. Why are some of them red.

    Those are calls you missed.

Maybe you are looking for

  • JBOSS Drivers 4.0.2 comaptiability with XI 3.0

    Hello I am getting following error in VA, when JBOSS 4.0.2 drivers are deployed using SDM. In RWB, JMS receivers all show Errors because of this. <b>Unable to create the QueueConnectionFactory due to org.jboss.mq.SpyConnectionFactory , Error ,  , com

  • I am getting error message while attempting to upgrade the software to iOS 6.1.3

    Hi, Need help on this, i am getting error message while attempting to upgrade the software to iOS 6.1.3

  • X6 bluetooth headset will no longer hear calls

    I've been using this with full sucess since July but my headset will only listen to music now.  If i try to make a call it ignores the headset and works on handset, reverting to headset for music when the call is over!  I have a spare controller and

  • Support profile can't be found

    Why is this so difficult?  First, it's hit or miss to simply find out where to sign in using my apple ID, and still harder to find my support profile.  Can someone make this simple for me?  Each time I want to register a device or remove one from the

  • TinyMCE in WPC

    Hi, i would like to know if anyone managed to integrate the tinyMCE in WPC in such depth that you don´t have to copy the KM links when you e.g. insert a picture from KM or when you insert a link to a KM document. In more detail...does anyone manage t