Why are the colors available in numbers so limited?

In the tutorial Apple is using lighter and nice shades of colors than you can actually use unless you copy a chosen cell and paste it. When you then got to the color selector it has no check mark on the chosen color cause it clearly does not match any that are available. If you click one to change it it's gone. Unless you click undo. Just wondering why and or if there is a work around.

I'm not aware of a workaround that would let you choose more colors IN Keynote. If you have Keynote for the Mac, any colors you create there will transfer over properly, but that still only gains you the ability to copy/paste colors.

Similar Messages

TS4337 Why are the colors for my calendar reseting to a color I never chose?

Why are the colors for my calendar in iCal reseting to a color I never chose? It won't stay blue when I choose that color and keeps changing to a custom lavendar color on its own.... Incredibly annoying...

There doesn't seem to be a one-size-fits-all answer, because what works for one printer doesn't necessarily work for another, and I don't have your printer so I can't advise on specifics...
However, perhaps we can discover a set of settings that will work...
If you File - Print, choose Photoshop Manages Colors, in the Printer Profile section do you see profiles specific to your printer (e.g., with the name Kodak in them)?
If so, choose one of them that seems appropriate given the paper you're using.
If not, try choosing sRGB IEC61966-2.1.
Now, before you continue, press the [Print Settings...] button. This brings up the printer driver dialog. You may have to go through [Advanced] buttons or whatever, but what you're looking to do here is to disable the printer driver's color management logic. In other words, if you can find a color-management / ICC profile handling section, set it to "no color management" or equivalent. OK back out to Photoshop's print dialog, then press [Print].
The key here is that if Photoshop manages the color transforms, the printer driver should not be set to do so - or vice versa.
If you're presented with the printer driver's dialog again, double check that the settings you chose above are still set, for good measure, and try a test print.
-Noel

Why are the colors flat converting from pages to pdf

I am working in Pages, creating color flyers and need to print in a PDF format. After exporting from Papes to a PDF format, my colors look flat and dull.
Why is this happening and can it be corrected?

Most likely you have original images which are RGB (Red/Green/Blue) the color of the glowing pixels of your screen.
A .pdf converts those to cmyk (Cyan/Magenta/Yellow/Black) the colors of a printer. These are reflective colors and do not appear as lively or wide a range as RGB.
There is considerable skill and art to making images look their best in print, I suggest you investigate color management and color correction of images.
The results can be improved by color correction, but ultimately it also depends on the printer and quality of the paper stock. The end result can never look as good on paper as it does on screen, but you can get closer.
Peter

Why are the colors in XTerm (x11) and Apple's terminal are different?

Is there a way to fix this? I would like Apple's terminal to look like XTerm...
the screenshot on the left is X11, and the screenshot on the right is Apple's terminal:

Patrick Collins wrote:
The "Pro" setting and the others are nothing more than settings for background and foreground text. Not the actual ANSI colors found when you do a colorized LS, or syntax highlighting in editors like vim.
So, that is my question, why are these two terminals interpreting colors differently? Where can I FIX what it thinks "blue" is, etc?
OK. I get it now. Apple's blue isn't blue enough I guess. Apparently people have been up in arms over this for years. I guess I missed it.
This hack: http://ciaranwal.sh/2007/11/01/customising-colours-in-leopard-terminal
is supposedly working in 10.6.4 now.

Why are the colors suddenly negative?

The colors on my iMac g4 10.4.4 are suddenly inverted...they look like photo negatives..I've tried to change it back in System Preferences and by shutting down and restarting but nothing helps...the colors are still all wrong...there must be something simple to change them back to normal but I don't know what it is..any help would be greatly appreciated.

If you want to know the reason why open System Preferences then click on Universal Access. Go down to Display and you will see options for Black on White and White on Black.
These can be set with a set of key commands, which you must have hit once by mistake (sounds odd but I did it once myself so I know it can happen).
If you want to make sure it doesn't happen again in System Preferences go to Keyboard & Mouse then Keyboard Shortcuts then turn off all the Universal Access commands.

Why are the colors in Illustrator and Photoshop so off?

Hi,
Let me just start off by saying I have the color mode in both Illustrator and Photoshop set to RGB. Yet, there is a noticeable color difference between a picture on the internet and when I paste it in for example Photoshop.
Picture from the internet:
Picture when pasted in Photoshop:
It's the same thing in Illustrator. And this is not just with pictures by the way, it's affects all the colors I use, which is a major pain in the rear.
Anyone know a fix?

Well, my suggestion in post #13, was to help me find out what the cause of your problem is. It doesn’t solve your problem permanently but temporarily, only for the current session of Photoshop or Illustrator by making these programs show your image without applying any color management conversions. So, you have to do this every time you open such files in these programs.
If you want to understand what is going on and be in control, you have to go through a lot of walls of text unfortunately .
I’ll try to explain it roughly but if you don’t understand it you need to read more about color management.
You are using Safari and this is how its color management works:
https://developer.apple.com/library/safari/technotes/tn2220/_index.html
on that page it says:
"Important: For images that are not tagged with a color profile, their color values will be displayed on the screen by Safari with no optimization or adjustment for differences between devices in how they render colors. This may result in the colors not being displayed as originally intended"
This made me think that like most images on the web, the image you are using doesn’t have a color profile. In that case, assuming a certain scenario based on your input, the reason it is displayed differently from Photoshop and Illustrator is because you have a color profile of your monitor used by your system that is different than the color space used for the display of the image. By default RGB Images without a color profile are displayed using the color space set for the working space in the Color Settings of Photoshop and Illustrator. Also by default this color space is sRGB. If your monitor was also with an sRGB profile assigned in the system, which is the case with all monitors that come without a color profile provided from the manufacturer, you should have not experienced this problem because Photoshop and Illustrator will see that the color space you want to display your image is sRGB and your monitor is sRGB, and there will be no color conversions because both color spaces, source and destination are the same. Unless someone else has setup your system ,color management, and installed a monitor profile, my guess is that the manufacturer of your monitor has provided a color profile installed in your system that is not sRGB.
When you choose View > Proof Setup > Monitor RGB, this in effect turns off the color management because you are displaying the image in the same color space as the one assigned to your monitor.
If you want to turn off the color management permanently which will be valid only when displaying images in the sRGB color space, you can assign the sRGB color profile to your monitor. This will show the images on your monitor with the same colors as those displayed without color management in the other applications and choosing View > Proof Setup > Monitor RGB will make no difference.
Non color managed programs can display the color only in the way your monitor displays it. Color managed programs simulate other outputs on your monitor. The only way to match the display in color managed and non color managed software is to turn off the color managed software. This will display the same color values with the same color in all programs on your monitor.
The purpose of the color management is to allow the viewer see the colors as intended (the way the creator sees them when creating the image). Different devices and media output the same color values differently resulting in different color. Therefore, when the viewer uses different device or media the colors if not color managed properly will look different or not as close as possible.
When you turn off the color management, or even when it is on but not properly applied, which I suspect is the case in your situation, you can’t be sure that the colors you see are as intended. In other words, you can’t tell if an image is supposed to look the way you see it, and you can’t create images providing means that will allow others to see them the way you see them.
So, for whatever reasons you want to make colors look the same in all your programs, have in mind that this is valid only on the current state of your monitor, and this also cuts the possibility to see and send to others colors as intended.

Why are the colors (red mostly) in my Press Quality PDF file darker than Original AI file?

Hi,
I am new to CS5 and have been doing a lot of researching and testing saving AI CS5 files in "Press Quality" PDF format. When I preview the PDF files in MAC's Preview application (will get Acrobat Reader as well) everything looks nice and crisp, but the colors are a bit on the dark side compared to my original AI files, namely the burgundy. Needless to say, I am only using CMYK and the resolution has been set to High.
Any suggestions would be greatly appreciated.
Thanks!

Hi again John,
Now I am sitting in front of the right computer and I just checked the CMYK profile in AI and it says: North America Prepress 2. I found the following tutorial on the internet and this guy says that it is best to use a CMYK profile called BEST WORKFLOW which is supposed to accurately display colors across all platforms. In the tutorial, he also added that if you do not see this profile listed then you should Load (directly from the CMYK profile window) it from your computer. However, I was unable to locate this profile on my MAC and since this tutorial is based on AI CS2, I am unsure if I can use it.
http://www.bing.com/videos/watch/video/adobe-illustrator-cs2-how-to-use-color-settings/85f 81f66adab4d48746e85f81f66adab4d48746e-562401182564?q=adobe+illustrator+cmyk+color+profiles &FROM=LKVR5&GT1=LKVR5&FORM=LKVR
Which CMYK profile would you recommend that I use?
Many thanks,
Diane

Why are the colors of my image not being printed correctly?

I have an image that I want to print from Photoshop to a Kodak printer but when I print the image and it comes out, the colors are off. I try changing some of the settings but the color changes every time and none of the printed images are correct. My violets come out kind of pinkish and blues come out purple. I'm using Photoshop CS5 Extended and a Kodak ESP 7250 printer. None of the colors are out of gamut. Which printer profile should I be using and should I let photoshop or the printer manage the colors? What about the rendering intent? Some insight on this problem would be most helpful!! Thanks!

There doesn't seem to be a one-size-fits-all answer, because what works for one printer doesn't necessarily work for another, and I don't have your printer so I can't advise on specifics...
However, perhaps we can discover a set of settings that will work...
If you File - Print, choose Photoshop Manages Colors, in the Printer Profile section do you see profiles specific to your printer (e.g., with the name Kodak in them)?
If so, choose one of them that seems appropriate given the paper you're using.
If not, try choosing sRGB IEC61966-2.1.
Now, before you continue, press the [Print Settings...] button. This brings up the printer driver dialog. You may have to go through [Advanced] buttons or whatever, but what you're looking to do here is to disable the printer driver's color management logic. In other words, if you can find a color-management / ICC profile handling section, set it to "no color management" or equivalent. OK back out to Photoshop's print dialog, then press [Print].
The key here is that if Photoshop manages the color transforms, the printer driver should not be set to do so - or vice versa.
If you're presented with the printer driver's dialog again, double check that the settings you chose above are still set, for good measure, and try a test print.
-Noel

When using pdfFactory with Firefox, why are the colors on the pdf not correct?

The colors are vastly different when using pdf Factory with Firefox. When using pdfFactory with IE, they are both the same.

There doesn't seem to be a one-size-fits-all answer, because what works for one printer doesn't necessarily work for another, and I don't have your printer so I can't advise on specifics...
However, perhaps we can discover a set of settings that will work...
If you File - Print, choose Photoshop Manages Colors, in the Printer Profile section do you see profiles specific to your printer (e.g., with the name Kodak in them)?
If so, choose one of them that seems appropriate given the paper you're using.
If not, try choosing sRGB IEC61966-2.1.
Now, before you continue, press the [Print Settings...] button. This brings up the printer driver dialog. You may have to go through [Advanced] buttons or whatever, but what you're looking to do here is to disable the printer driver's color management logic. In other words, if you can find a color-management / ICC profile handling section, set it to "no color management" or equivalent. OK back out to Photoshop's print dialog, then press [Print].
The key here is that if Photoshop manages the color transforms, the printer driver should not be set to do so - or vice versa.
If you're presented with the printer driver's dialog again, double check that the settings you chose above are still set, for good measure, and try a test print.
-Noel

Why are the colors dimmer on Win XP?

Just curious if I'm imagining things or what.
I have the white macbook (great machine), partitioned with XP. When running OS X, the colors look fine, but when I switch to XP, everything seems dimmer with not nearly the contrast or sharpness to the color. Everything just seem to look dimmer on XP.
Anyone know what I'm talking about, and what the deal is?

Just curious if I'm imagining things or what.
I have the white macbook (great machine), partitioned with XP. When running OS X, the colors look fine, but when I switch to XP, everything seems dimmer with not nearly the contrast or sharpness to the color. Everything just seem to look dimmer on XP.
Anyone know what I'm talking about, and what the deal is?

When printing on a digital press, why are the colors different between INDD & PSD?

I've created the exact same CMYK mix in both InDesign and Photoshop. When printed on a digital press they are not the same color. Any ideas how this can be fixed/solved?

Sounds like the RIP treats raster and vector objects differently. see InDesignSecrets » Blog Archive » Eliminating YDB (Yucky Discolored Box) Syndrome for a discussion of how this affects transparency interactions, and how to work around it. I suspect you can cure it by adding transparency to the master page and using the custom flattener method.

Why are the colors appearing incorrect in my version of adobe

below are two images - they show different colors of the same adobe file
the one on the left is what i see when i open a file from adobe reader on my PC (Windows)
- the other is the same file shown as a screenshot taken from someone else who opened the same file in adobe.
This has happened in loads of files that have originated from different users. I have tried uninstalling and reinstalling adobe reader with no change.
I have a nearly new ASUS laptop with Windows 8. How do correct this to ensure i get the correct colors when i open adobe on my PC?. .

Hi again John,
Now I am sitting in front of the right computer and I just checked the CMYK profile in AI and it says: North America Prepress 2. I found the following tutorial on the internet and this guy says that it is best to use a CMYK profile called BEST WORKFLOW which is supposed to accurately display colors across all platforms. In the tutorial, he also added that if you do not see this profile listed then you should Load (directly from the CMYK profile window) it from your computer. However, I was unable to locate this profile on my MAC and since this tutorial is based on AI CS2, I am unsure if I can use it.
http://www.bing.com/videos/watch/video/adobe-illustrator-cs2-how-to-use-color-settings/85f 81f66adab4d48746e85f81f66adab4d48746e-562401182564?q=adobe+illustrator+cmyk+color+profiles &FROM=LKVR5&GT1=LKVR5&FORM=LKVR
Which CMYK profile would you recommend that I use?
Many thanks,
Diane

Why are the colors in my digital booklet super saturated on my iPad?

I find it ridiculous that I have to change the format of the digital booklet in the first place, but after I did that I transferred it to my iPad, opened iBooks and my digital booklet's colors re so saturated I could read half of the words in the book because they were black. How do I solve this??? Is it a bad download?

Hi again John,
Now I am sitting in front of the right computer and I just checked the CMYK profile in AI and it says: North America Prepress 2. I found the following tutorial on the internet and this guy says that it is best to use a CMYK profile called BEST WORKFLOW which is supposed to accurately display colors across all platforms. In the tutorial, he also added that if you do not see this profile listed then you should Load (directly from the CMYK profile window) it from your computer. However, I was unable to locate this profile on my MAC and since this tutorial is based on AI CS2, I am unsure if I can use it.
http://www.bing.com/videos/watch/video/adobe-illustrator-cs2-how-to-use-color-settings/85f 81f66adab4d48746e85f81f66adab4d48746e-562401182564?q=adobe+illustrator+cmyk+color+profiles &FROM=LKVR5&GT1=LKVR5&FORM=LKVR
Which CMYK profile would you recommend that I use?
Many thanks,
Diane

Why are my soft proofed prints always too dark in the dark areas and why are the colors, especially red, washed out.

Use a calibrated camera and monitor. Work in PS CC. Have a controlled work room. Soft proof according to Jeff Schewe of the 'Luminous Landscape'. Printing on a new Epson r2880 with a custom profile. Use fresh Epson Luster paper. The problem keeps persisting no matter what I do. Any and all help will be much appreciated.
Thanks.
Richard

Please turn off your auto reply in your emails. The forums are designed to be used through a web browser while logged in to the forum. We don't need to see stuff like your "On Sun, Oct 12, 2014 at 10:50 PM, station_two <[email protected]>". Everybody sees everyone's post.
~~~~~~~~~~~~~~~~~~~~~~~~~~
Now, did they first send you a target file which you then printed on your particular printer using your intended paper and inks, then snail-mailed the print to them in California in order for them to make your custom printer profile for you, which they then in turn emailed to you? If that was not the case, you do not have a custom profile at all, but a meaningless stock one. Even if they used a printer model exactly like yours when they created the profile, it was not done on your particular unit and therefore is not valid.
On the other hand, if the procedure above was indeed followed correctly, then that custom printer profile is showing you exactly what your images will look like once you print them.
That's precisely what soft proofing is for, so you can adjust your image while in Proof view.
Hope this clears it up for you.

Why are the color images turning gray when I open them in Photoshop cs5

My images are going gray when I open them so is there any on knows how to solve this issue

what images
if RGB, that sounds like a bad monitor profile or Photoshop setting

Why are the colors available in numbers so limited?

Similar Messages

Maybe you are looking for