Why are there two prices for the same audiobook?

Why are there two prices for the same audiobook in iTunes?

May be one is abridged and one unabridged ? or they just may want to get the suckers that think the more expensive one is better ... haha.

Similar Messages

Data collection was switched from an AI Config task writing to an hsdl file to synchronized DAQmx tasks logging to TDMS files. Why are different readings produced for the same test?

A software application was developed to collect and process readings from capacitance sensors and a tachometer in a running spin rig. The sensors were connected to an Aerogate Model HP-04 H1 Band Preamp connected to an NI PXI-6115. The sensors were read using AI Config and AI Start VIs. The data was saved to a file using hsdlConfig and hsdlFileWriter VIs. In order to add the capability of collecting synchronized data from two Eddy Current Position sensors in addition to the existing sensors, which will be connected to a BNC-2144 connected to an NI PXI-4495, the AI and HSDL VIs were replaced with DAQmx VIs logging to TDMS. When running identical tests, the new file format (TDMS) produces reads that are higher and inconsistent with the readings from the older file format (HSDL).
The main VIs are SpinLab 2.4 and SpinLab 3.8 in folders "SpinLab old format" and "Spinlab 3.8" respectfully. SpinLab 3.8 requires the Sound and Vibration suite to run correctly, but it is used after the part that is causing the problem. The problem is occuring during data collection in the Logger segment of code or during processing in the Reader/Converter segment of code. I could send the readings from the identical tests if they would be helpful, but the data takes up approximately 500 MB.
Attachments:
SpinLab 3.8.zip ‏1509 KB
SpinLab 2.4.zip ‏3753 KB
SpinLab Screenshots.doc ‏795 KB

First of all, how different is the data? You say that the reads are higher and inconsistent. How much higher? Is every point inconsistent, or is it just parts of your file? If it's just in parts of the file, does there seem to be a consistent pattern as to when the data is different?
Secondly, here are a couple things to try:
Currently, you are not calling DAQmx Stop Task outside of the loop; you're just calling DAQmx Clear Task. This means that if there were any errors that occured in the logging thread, you might not be getting them (as DAQmx Clear Task clears outstanding errors within the task). Add a DAQmx Stop Task before DAQmx Clear Task to make sure that you're not missing an error.
Try "Log and Read" mode. "Log and Read" is probably going to be fast enough for your application (as it's pretty fast), so you might just try it and see if you get any different result. All that you would need to do is change the enum to "Log and Read", then add a DAQmx Read in the loop (you can just use Raw format since you don't care about the output). I'd recommend that you read in even multiples of the sector size (normally 512) for optimal performance. For example, your rate is 1MHz, perhaps read in sizes of 122880 samples per channel (something like 1/8 of the buffer size rounded down to the nearest multiple of 4096). Note: This is a troubleshooting step to try and narrow down the problem.
Finally, how confident are you in the results from the previous HSDL test? Which readings make more sense? I look forward to hearing more detail about how the data is inconsistent (all data, how different, any patterns). As well, I'll be looking forward to hearing the result of test #2 above.
Thanks,
Andy McRorie
NI R&D

Why are there two updates for Photoshop

CC desktop shows updates for:
Photoshop CC
Photoshop CC (2014)
What are the differences?

Because apparently it is programmed deep, deep into Adobe's DNA that they cannot possibly manage to come up with a straightforward, clean, and logical installation process. It is demonstrably beyond what's possible for Adobe. I say that based on years and years of dealing with their byzantine, buggy, and bloated installers. The Cloud was supposed to magically make things better.
I also now have two versions of After Effects, Audition, Flash, Illustrator, Media Encoder, Muse, and Photoshop residing on my computer.
Why?
Well, because the Creative Cloud installer didn't really "update" the current software...it just installed new versions next to the old ones.
Why?
Beats the hell out of me. But I'm pretty sure if I expend my time to contact Adobe's support folks I will be told to go through some process of manually removing each copy of the old software. They won't know why the "upgrade" process worked this way, and they won't care. They'll just cheerfully advise me to waste my time cleaning up Adobe's mess. Again.
Looking forward to the day I no longer need to use Adobe products.
Are you listening, Apple?

Why are there no updates for the 800w

I know there were 2 patches early on. The voice command works about 80% of the time, so I guess that's better than nothing; I can't see any improvement in the usb charging / recognition behavior; or let's just say it's still extremely poor.
I look at the Blackberry Bold forum and see that there are updates for that already; in fact it looks almost continuous. That is, there are signs of activity from BB and none from Palm.
Post relates to: Treo 800w (Sprint)

What I was kinda hoping for with this new upgrade was a news column in the ministore...I think most fans now realize that it's the studios fault (thanks to Debbstar and others). What people don't know (me included) is WHY??? We want to know what's going on insead of speculating. Is there a contract legal issue regarding schedule changes at Sci Fi? Does this have something to do with the syndications coming out? Or maybe something to do with SG1's cancelation?? Fans hate being left in the dark more than they hate not being able to download their shows...well, almost as much anyway Jesus, I am a geek now. I'm complaining about a science fiction show. Lets all go picket!!

When my iPad (ios7 ) is in portrait mode, why are there two clocks at the top?

<a href="http://www.flickr.com/photos/97594523@N03/10405000055/" title="Ios7 no open apps, look at clocks... by staceymaehunt1, on Flickr"><img src="http://farm4.staticflickr.com/3729/10405000055_1e0f80df5f.jpg" width="375" height="500" alt="Ios7 no open apps, look at clocks..."></a>
<a href="http://www.flickr.com/photos/97594523@N03/10405000025/" title="Ios7 ipad overlapping digital clock by staceymaehunt1, on Flickr"><img src="http://farm6.staticflickr.com/5508/10405000025_f51036c416.jpg" width="375" height="500" alt="Ios7 ipad overlapping digital clock"></a>
Weird.
Let me know if there is a fix to this, ;)

Have you tried changing your background image ? It looks to me like your current background includes the time on it (it looks like it might have been a screenshot from somewhere taken at 11:45), so what you are seeing is the actual time overlaid onto the time that is part of your image - the top part of the first image in your post includes :

HT1390 Why do I get a different movie price for the same movie on my iPad and iPhone. And 1 device says I can rent it but the other doesn't ,.?

Why do I get a different movie price for the same movie on my iPad and iPhone. And 1 device says I can rent it but the other doesn't ,.?

Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296

Why are there two lines showing when I switch off my iPad where the cancel word is?

Why are there two lines showing on my iPad when I turn it off where the cancel word is.

You wrote:
"I have noticed that on my IPad Calendar, that on some of the scheduled appointments it is showing Phoenix as a time zone. On some it is showing Salt Lake City, and then on others it will show Denver. I can't quite see why or understand why that this is an issue since everything is set to Salt Lake City. On the ones that show up with Phoenix as the time zone the times change. Also I have had some of the times showing on the calendar at an hour different that when I open the Appointment. It will show the correct time, but on the Calendar it is sometimes different. "
From that information, it makes sense that your calendar is off.
Phoenix is in another time zone part of the year. When daylight saving changed, Salt Lake City and Denver changed, but Phoenix did not. You may have set time and date to auto, but the Mac knows the time difference and is compensating for it.

Use two indicators for the same variable in two different VIs

hello, I want to use two indicators for the same variable in two different VIs running at the same time
should I use global variables?? I want to avoid because I have lot of variables and it would takes too much memory,I tried with this code but the value of the second indicator is not updated
I tried to use the queue and it works but the problem is as i said previously that i have many variables shoud I use a queue for each one??
what should I do?
thank you in advance
cordialy
Attachments:
projet.zip ‏13 KB

CrisSTine01 wrote:
hello, I want to use two indicators for the same variable in two different VIs running at the same time
I'm a huge fan of User Events to send updates to GUIs from who knows where.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Why are there two separate JWS forums?

There's this forum and http://www.javadesktop.org/forums/forum.jspa?forumID=45 - shouldn't they be merged? Why are there two? Which one is the "official" one?

This forum, (the java developers forums) pre-date javadesktop.org, and as can be seen by the total thread count (5000+ threads vs 64 topics) has a lot more activity on the yopic of Java Web Start.
Javadesktop.org was created in 2003, and since it has much overlap with generic java development they also created a thread in their forum for Java Web Start.
/Andy

Can we create two POs for the same 3rd party Sales Order?

Hi MM experts,
Issue: Can we create two POs for the same 3rd party Sales Order
In Third party purchase process, first sales order created with a spl. item category and it creates the PR automatically with the Sales order material and Qty and this PR converted PO.
They got a pur.req. for sale order on same item for same delevery date. They did not get any warning msg. saying that a PO was prviously placed against this sale order.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
If anyone face the same issue, please let me know if you have any answer to this questions.
Thanks in advance.
Suresh.

Suresh,
It is hard for me to give you a definitive answer since you have created a customized solution.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
Normally, the system will not do this. A third party PR or PO will be 'account assigned' to the Sales order. SAP standard 3rd party will not create additional purchase reqs unless there has been manual intervention. Try searching for changes in the Sales order and changes in the original purchase order. They may give you a clue.
I believe the normal Item category for third party SO is TAS (I am working from memory here, I am not in front of a system). I don't know what ZTAG does. I confess I am not an SD expert. You might also want to post your question in an SD forum.
You mention two custom applications, ZMMPLAN and ZSTPMP. These somehow have functionality that is used to help you convert your PRs to POs. If I were in your position, I believe I would also look at these applications for clues to how they might be contributing to your problem. And please don't send me details about these apps. I will not comment on custom code in this forum.
Sorry I can't be of more help.
Rgds,
DB49

Post a witholding tax in two countries for the same vendor

Hi all,
I would like to know if there is any way (standar not development) to post a witholding tax in two countries for the same vendor belonging to a company code. (extended witholding tax scene).
System always display extended witholding indicators belonging to the country of the company code.
Thanks in advance.
Emilio Rozalén
SAP FI Consultant.

Hi B.Rama,
I think so, but Do you know the meaning of country witholding field in vendor master?.
Besides you can find this field in customizing, reports but I dont know its functionality.
Thanks and regards
Emilio Rozalé

Why Are There Two Sets of Current Flash Releases, 10.3.x and 11.2.x?

Why are there two sets of current Flash releases, 10.3.x and 11.2.x?

As Pat mentioned, our current policy is to support the last major version of Flash Player with security related fixes.

Why are there lines going across the screen?

Why are there lines going across the screen?

It may (likely) be a video card issue. There is a "known issue" with certain iMacs made in a certain timeframe (2011-12 I think), and one of the telltale symptoms is vertical lines showing up on your display. Go to Apple's website (https://getsupport.apple.com/) to find out how to get support, then either call their service line (they usually pick right up) or take it into your nearest store's Genius Bar. They'll first check if your iMac's serial number is on the list of vulnerable machines, and then they'll have to do a diagnostic to prove that's the problem -- if your serial number's on the list and it fails the diagnostic, they'll replace the video card for free, even if you're not covered by AppleCare (and if you are, it's free regardless).
My iMac just had this problem, there were lines sometimes and just weird display issues other times. Eventually it just grayed out altogether and I couldn't use it. So it's likely your display problems will worsen if you don't get it looked at.
It took them about a week to ship the new video card over, install it, and return the iMac to me.
Good luck!

Why are there no favicons for many of my bookmarks? Where there was a favicon, a blank box with a dotted outline now appears.

Why are there no favicons for many of my bookmarks? Where there was a favicon, a blank box with a dotted outline now appears.

Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file

Why are there no features for blur icons, docks, etc etc, are you not apple? Make it happen, i refuse to jailbrake

Why are there no features for blur icons, docks, etc etc, are you not apple? Make it happen, i refuse to jailbrake

Mojito1985 wrote:
Why are there no features for blur icons, docks, etc etc, are you not apple? Make it happen, i refuse to jailbrake
As noted, you are not addressing Apple here. Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback
Good idea not to jailbreak.

Why are there two prices for the same audiobook?

Similar Messages

Maybe you are looking for