Why are these words not acceptable?

Following up from another question regarding the frustrating password validation, you answered back that these following words were not acceptable in one's password:
1234
4321
qwert
test
skype
myspace
password
abc123
123abc
abcdef
iloveyou
letmein
ebay
paypal
I understand that it'd be a problem if someone used one of those alone without any prefix or suffix with it, but WHY are you blocking it altogether? Why not allow it at least in middle of a cryptic word, like !@#$skype**&& , or ()()skype<><> ?
It seems your password validation rules just check for an occurance of those words (some of which are questionable as to why it's blocked in the first place) anywhere in the string.
Why are you making it hard for your users to come up with a password they can remember?Pretty much every other services (gmail, facebook, twitter, etc.) are equally as important and used (if not more important/used than Skype, on a daily basis) and don't enforce as much password rules and blocked words.
It would be nice to see Skype go in the direction of 2-step verification like Gmail has.
Use a simple password, bind a Cell-Phone number to it, get your temporary code via txt-message (if it's your first time on that computer / non-cached in browser), Simple!

Hi
Visual Composer supports Web services that are compliant with the Basic Profile 1 standard of the Web Services Interoperability (WS-I) Organization (http://help.sap.com/saphelp_nw70/helpdata/en/e0/92583ab4da4b9cb524f61ba4267d25/content.htm)
Best regards
Vincenzo

Similar Messages

Why are these Webservices not supported in VC ?

Hi all,
I am using NW04s SP9, and I plan to make MDM-Application with VC.
Therefore I introduced MDM-WebService into NW and defined it on VC.
but "searchRecords" of "MDMSearchRecords" was displayed with "Not supported"
in the right frame .
Mmm...
So I decided to think from a beginning.
[http://www.27seconds.com/Holidays/US/USHolidayService.asmx?wsdl|http://www.27seconds.com/Holidays/US/USHolidayService.asmx?wsdl]
I defined above it on VC and I used "Getholidaydate" .
Good! .
However,,, "Getholidaysforyear" was also "Not supported".
Why are these methods "Not supported" ? .
and how will come to be usable these methods in VC? .
Thanx in advance.
Regards,
k.sugimoto.

Hi
Visual Composer supports Web services that are compliant with the Basic Profile 1 standard of the Web Services Interoperability (WS-I) Organization (http://help.sap.com/saphelp_nw70/helpdata/en/e0/92583ab4da4b9cb524f61ba4267d25/content.htm)
Best regards
Vincenzo

Why are animated gifs not displaying animations in the preview?

Why are animated gifs not displaying animations in the preview?
My coworkers and I are not seeing a animation in the preview pane in Adobe Bridge CS6 even when clicking the play button in the preview window. However, we do see a graphic of the first frame and one person sees 1 frame when clicking play and one other frame and then the animation stops, however, that is not the complete animation.
I'm using Windows 7 32 bit
My coworkers are using a mac.
One coworker has apple OS Mountain Lion with a Intel Quad-Core Xeon – 64 bit system.
Is this fixable or in the works as a patch? Otherwise we have to open these docs in a browser in order to view them properly.

I've just come to the realization that some animated gifs do play fine and others do not. A coworker of mine suggests that if it's an animation made via Adobe Photoshop, it'll work in bridge but will not if it's made using something else.

Why are my audiobooks not going through home sharing?

why are my audiobooks not going through for home sharing.

According to this thread (https://discussions.apple.com/thread/3525692), it looks like you are not able to share audiobooks through Home Sharing:
You can share MP3, AIFF, WAV, AAC, and radio station links, but you cannot share iTunes Store Audio Books, Audible spoken word content, or QuickTime sound files.
You can leave iTunes feedback here: http://www.apple.com/feedback/itunesapp.html

Why are my videos not playing the right way up

Why are my videos not playing the right way up

I took four video clips while on a trip this week. Two are oriented the right way (playing wide on the device and imported correctly). The other two are Tall and not oriented right. Orientation is 90 degrees to the right. I don't know why this is happening on occasions. Even some pictures I took did the same **** thing. It's weird. And I can't figure it out. The camera is held the way I want the pictures and videos to be recorded and played but something internal is turning these videos and pictures 90 degrees clockwise.

Why are my films not working :L

why are my films not working the soung is all out off place and it is doing my head in can some one help me :L X

Welcome to the Apple Community.
Licensing, in a word. The movie studios will not allow Apple to add movies to iTunes in the cloud.

HT5552 are debit cards not accepted as one of the payment methods?

are debit cards not accepted as one of the payment methods?

This is a user to user forum, so why, we couldn't answer.
I found the following for you:
The Mac App Store, App Store and iBookstore services (the "Stores") accept credit cards issued by banks in India or Content Codes as forms of payment. iTunes may obtain preapproval for an amount up to the amount of the order. Billing occurs at the time of or shortly after your transaction. If you are using 1-Click purchasing, your order may be authorized and billed in increments during one purchasing session, so it may appear as multiple orders on your statement. When making purchases, content credits are used first; your credit card is then charged for any remaining balance.
This is a long link, but if you read throught it, you'll find more information: http://www.apple.com/legal/itunes/appstore/in/terms.html
Otherwise, you should contact Apple Direction for an answer.

Re: Why are there numbers not showing up on my verizon online call and texts log?

I am having the same problem with texts not appearing on my online text log and have also noticed a huge increase in data since my two sons have had their iPhone 5s. I have the iPhone 4. Two problems here
iPhone users DO appear. In the posted questions and response below, you indicate that if we are all using iPhones then we are not using the Verizon network but using data. HOW DO I STOP THIS DATA USAGE AND RETURN TO USING THE NETWORK? I can't afford the data charges that I am getting.. HELP!! and Thank you.
1.   Re: Why are there numbers not showing up on my verizon online call and texts log?
          SuzyQ   May 11, 2013 8:03 AM (in response to aheath17)
If you are all using iPhones, then it's likely the texts are going through iMessages and therefore use data. Since the texts are not using the Verizon network, but the app, they do not show up in the logs. The app is not specifically blocking the texted numbers from showing up, but the information comes through Verizon as data usage, not numbers texted.

    Sparkyjames81,
Lets figure out just where those texts are going! There are many apps that can be downloaded from the Play Store for Android phones that will allow messages to be sent over the internet, and therefore they are not actually text messages and will not show up in our records. Even Facebook has their own messaging app available that does this.
If you have an iPhone, they come with a service called iMessage that allows for messages to other Apple devices be sent via the internet, and this will also not show up on our records. These are all ways to bypass our actual texting services, and since these messages are not being sent as texts they do not show up on our records.
SarahO_VZW
Follow us on Twitter @VZWSupport

WHY do these discussions not

Why do these discussions not show # of views and replies anymore? I mean, why remove that info from the page?
And why make the discussions overall less functional and rather icky..?
WHY WHY WHY?

I can't even EDIT my question which i just posted above.
And the discussions are MUCH slower now on my computer. Very difficult to use. (Is this by design perhaps..?)
And when I try to "Reply"--i get an error message in a pink box saying
"An error occurred while trying to submit your post. Please try again."
That would be an error by the Apple programmers, i guess. At least i can go to the "advanced editor" (a small, grey link in the corner) and submit the reply, but that in itself is absurd. And the "Advanced" editor forces a text box width of nearly 1024, meaning it MUST go off my screen on one side. Pathetic. This is stuff that programmers figured out how to avoid in the 1970s. Hello, Apple.

Disc Burner. Why are some files not readable or writeable?

Hello,
I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
"The operation cannot be completed because some data cannot be read or written.
(Error code - 36)"
Followed by the choices: "Stop" or "Continue".
I have a bad feeling that my startup disk is too small but I am not sure.
Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
Here are the specifications:
Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
Here is my process (I hope I am doing this right - I am new at this):
1. I first insert a blank DVD-R
2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
Why would some files not be readable or writeable?
4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
"Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
Am I doing this the right way?
Why are some files not "readable or writeable" as it indicates in the error message?
Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
Thanks

To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
Thanks Kappy

Why are the iPhotos not listed in the finder?

why are the iPhotos not listed in the finder?

There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Why are my songs not completing play?

why are my songs not completing play? plays half a song then on to the next

Welcome to the Apple Community.
Try restarting iTunes.

Why are my contacts not showing up in my iMessage on my macbook pro?

Why are my contacts not showing up in my imessage on my macbook pro?

open messages. go to messages>preferences>accounts. select your icloud account from the left sidebar, and uncheck 'enable this account' then recheck 'enable this account'
you should also be using icloud to sync your contacts. sytem preferences>icloud. check the 'contacts' box

Why are my emails not deleting from all devices when deleted from one? I have iCloud set up and turned on. I have ipad2, iphone5 and a Mac. What am I doing wrong? Thank you

Why are my emails not deleting from all devices when deleted from one? I have iCloud mail set up and turned on. I have ipad2, iPhone 5 and a Mac desktop. What am I doing wrong? Thank you.

It depends on the type of email account you are using, not on iCloud. If you are using an IMAP or exchange account, when you delete from one device, it is deleted from all devices. If you are using a POP (POP3) account, it won't. (iCloud email, Gmail and Yahoo are all IMAP accounts.)

Why are my thumbnails not matching photos?

Why are my thumbnails not matching the photos in my smart album?

I am rebuilding my thumbnails--a slow process I am learning. We'll see how that does. I believe I have the latest version of both iPhoto and OS. What happens is that the thumbnail does not match the photo. The photo in the thumbnail is in the same series, but not the same. Many of the thumbnails are the same photo from the series. I'll report back on the success of the thumbnail rebuilding process.

Why are these words not acceptable?

Similar Messages

Maybe you are looking for