Why attribute chnage run is needed when u do not have aggregates?

Hi,
Attribute change run is needed soon after the hierarchy upload is understandable!
Attribute change run is needed soon after the Transactional data also if the cube has aggreagtes is also understandable!
But my cube does not have any aggreagtes created and it is a new one by far!
even then in my process chain, soon sfter i add the infopackage process, i am getting the attribute change run automatically in the process chain!
Can any body explain me why i am getting that attribute change run after the trasactional IP though that does not have any aggregates!
Thanks,
Ravi

hi ravi,
up to my knowledge, activation is enough if no aggregates are manitained.
refer the following text.
Activating Master Data and Texts
Prerequisites
Master data and texts have already been loaded into the BI system using the scheduler.
Procedure
Activating Master Data
When you update master data from an SAP system the master data is imported in an inactive state. You must activate the new master data so that it can be accessed and used for reporting purposes.
For more information, see Versioning Master Data.
Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic  ® Activate Master Data.
Upon Activation there are two scenarios to choose from:
The Corresponding Master Data Is Already Being Used in Aggregates in the InfoCube:
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case, proceed as follows:
       1.      In the main menu, choose the path Tools ®Hierarchy/Attribute Change.
       2.      Proceed as described in System Response upon Changes to Data: Aggregate.
The system now automatically restructures and activates the master data and its aggregates.
Please note that this process can take several hours if the volume of data is relatively high. Therefore, you should simultaneously activate all of the characteristics that are affected by changes to their master data, at regular intervals.
The Corresponding Master Data Is Not Used in Aggregates:
Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic  ® Activate.
The system now automatically activates the master data so that it can be used directly in reporting.
Activating Texts
Texts are active immediately and can be used directly in reporting. You do not need to Activate manually.
thank u,
reward if helpful.

Similar Messages

  • Why does Firefox give this message when I do not have another program running "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."

    Question
    why does Firefox give this message when I do not have another program running or another window open - "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." edit

    See also "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    *https://support.mozilla.com/kb/Firefox+hangs

  • I download Fruit Ninja but it failed bec of it's MB but I was billed so why would I pay such game when it was not successfully downloaded in my ipad2? If I cud install it then I shall pay the thing.

    I download Fruit Ninja but it failed bec of it's MB but I was billed so why would I pay such game when it was not successfully downloaded in my ipad2? If I cud install it then I shall pay the thing.

    You paid for it because you bought it, there is nothing stopping you from now downloading it. If it is over 20 meg in size then you either need to switch to a wifi network on your iPad (there is a 20 meg limit per file over 3G), or try downloading it on your computer and then either sync it across to the iPad or drag-and-drop it from the Apps library in iTunes over and onto your iPad 'device'.
    If you can connect the iPad to wifi then re-try downloading it (re-downloading) - f it currently shows as 'waiting' on the screen then try a reset and see if it resumes downloading after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Why is HP SimplePass on my new windows 8.1 machine, when I do not have a finger or card reader?

    Why is HP SimplePass on my new windows 8.1 machine, when I do not have a finger print or card reader?
    It keeps popping up and asking me to use it?
    Can it be used to keep my passwords?
    What Version of SimplePass are you using?   Unknown, apparently you have to use it to find the version number.
    What is your Operating System? Windows 7 32 or 64bit? or?   Windows 8.1  64 Bit
    Which browser are you using?  Internet explorer version 11, and Fire fox version 34.0
    Can you give me a example of a Website that is giving you this problem?  Have not used it yet.
    Is is every webcard or just one or two websites that have this problem?  Have not used it yet
    What is your computer product number? (NOT serial number?)  HP 15-f039wm Notebook PC
    Thanks for any help you can offer.

    Hi,
    You could check the blog below.
    How to Enable Group Policy Debugging on Windows 7 / 8 Clients
    http://clintboessen.blogspot.jp/2014/01/how-to-enable-group-policy-debugging-on.html
    Note: Microsoft provides third-party contact information to help you find technical support. This contact
    information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    If you have any questions about Group Policy, you could get better support from Group Policy forum.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

    HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

    You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.

  • Why can you run windows on a mac, but not mac on windows

    I dont understant why you can run windows on a mac, but not mac on windows.  Any help.  I would purchase OS X Mountain Lion if you gave me a way.

    Microsoft builds software to run on other companies' hardware, pretty much exclusively if you don't count the long line of failed devices: Zune, Windows phone, and now the Surface.
    Apple builds hardware. They support that hardware with their own operating system. It is designed to run only on their very tightly integrated hardware. Trying to write software for the plethora of crap being sold would be a failing proposition and would divert resources away from the great software they provide for their hardware customers.
    The hardware and software are very well engineered to provide the best possible experience.
    If you want to experience a Mac, buy a Mac.

  • My Macbook Pro Stops running as normal, when it is not connected to the charger. Once it goes off the plug, it slows down to a point where it is not usable.

    My Macbook Pro Stops running as normal, when it is not connected to the charger. Once it goes off the plug, it slows down to a point where it is not usable. is there any fix to this?

    https://support.apple.com/kb/HT3964

  • Why won't my pandora work when I'm not on wifi? I have the cellular data on for it but I never works. Also pandora isn't the only app of mine that does that.. What's wrong with it??

    Why won't my pandora work when I'm not on wifi? I have the cellular data on for it but I never works. Also pandora isn't the only app of mine that does that.. What's wrong with it??

    You're welcome.
    Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
    You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

  • Why does my sound say "headphones" when I don't have any headphones in?

    I have a iPhone 4 and it's an 8GB phone, and it is updated to iOS 7.0.4. When I move the switch on the side that controls silent or ringer, it shows up on my screen saying "headphones" when I do not have headphones in. So basically I have no sound and only vibrate. But if I were to insert headphones there is sound through my ear piece as it normally should be. I had my phone in my bag and my water bottle in my bag spilt and I'm assuming I have this sound problem because it is water damaged but I'm not completely sure. I don't want to put my phone in rice, which I heard is what you're supposed to do when it is water damaged. But I don't want to because a rice can fit in the whole where you insert your headphones and I wouldn't want to get a rice stuck there. I also turned my phone off for more than 10 seconds just so it can reset, thinking maybe it was a temporary issue that could've been fixed by turning your phone off, but no, it is still broken. So how do I fix this? Is the only solution getting fixed at apple?

    Also my speakers do not work. When I receive a notification, message, or call there is no ringer and when I answer a call I cannot hear the other line. So I am pretty sure I water damaged my phone. How do I fix this?

  • How do I get twitter installed on my iPad when it does not have iOS 5.0?

    How do I get twitter installed on my iPad when it does not have iOS 5.0? How can I upgrade my iPad?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 4: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Asking the Bridge Team:  Bridge "working color space" setting when one does not have the Suite?

    Common sense tells me there is really no such thing as a
    "working color space" in Bridge, because
    Bridge is not an image editor, just a browser
    Therefore, this may turn out to be a purely academic question; but that doesn't keep my curiosity from forcing me to ask it anyway. ;)
    Is there a way to set the Bridge
    "color settings" when one does not have the suite?
    The only Adobe program I keep up to date is Photoshop, so I've never had the suite. My version of Photoshop is 11 (CS4) and I run updated
    (not upgraded) versions of Adobe Acrobat 7.x, Illustrator 10.x and InDesign 2.x. Consequently, the Synchronize color settings command is not available to me.
    It seems to me that Bridge is behaving like a proper color-managed browser (e.g. Firefox with color management enabled), in that it displays tagged image files correctly and assumes sRGB for untagged image files. This normally works fine.
    But what if I wanted Bridge to assume my
    Photoshop color working space for untagged images
    so that it behaves the same as Photoshop? I'm just curious, as I deal with a minuscule, practically negligible amount of untagged files.
    My reason for bringing it up now is that I don't recall this being explicitly mentioned in forum replies when users inquire about color settings in Bridge. A recent post regarding Version Cue in the Photoshop Macintosh forum got me thinking about this. Just wanting to make sure that I'm right in my assumption that
    there is really no such thing as a
    "working color space" in Bridge, because Bridge is not an image editor, just a browser.
    Thanks in advance.

    Hi Ramón,
    Thanks for sharing the outcome of your tests. However, I may have found a bug/exception to Bridge's colour management policy!
    It appears that CMYK EPS photoshop files are not colour managed in Adobe Bridge, even if they contain an embedded ICC profile.
    I've tried every combination in the EPS 'Save As' dialogue box, so it doesn't seem to be an issue with file encoding. Also, Bridge doesn't rely on the low-res preview that is held within the EPS itself.
    My guess is that Bridge is previewing the CMYK EPS with a Bridge-generated RGB image, but it's being displayed as monitor RGB (assigned) rather than colour managed (converted to monitor RGB). For most users the difference will be barely perceptible, but the problem became very noticeable when using Bridge to preview Newsprint CMYK images on a wide-gamut monitor (images that should have appeared muted really leapt off the screen!).
    How do I report this to the Colour Police at Adobe?!?

  • Quota deduction when EE has been inactive for more than 180 days / Advance quota days when employee does not have enough balance

    Dear experts,
    We have two requirements regarding to the "Anual leave" quota.
    1. Quota reduction when employee is inactive for more than 180 days
    2. Advance quota days when employeee does not have enough balance
    We have in place an "Anual Leave" quota related to a calendar year period, that gets generated dialy in time evaluation. This quota gets the employee entitlement from a set of rules that stored the corresponding balance in a period time type, that is the one that we defined in the customizing. This is working fine. The problems start when we try to incorporate the other two requirements.
    Regarding the first requirement, if the employee has been inactive for more than 180 days in a calendar year due to unpaid leave, we need to start quota reduction as follow,
    First, we need to clear the balance that was calculated above in the schema.
    Then, we need to calculate one leave day for every 20 days worked till the end of the year, considering as such, everyday the employee is expected to work, except days on which the employee has been absent on unpaid leave.
    For the second requirement we created a manual quota call "Advance Anual Leave". So, if the employee, wishes to take 20 working days holiday, but in his/her Anual Leave quota has only 10 days available, we have to create an "Advance Anual Leave" quota manualy for 10 days. When the quota for next year gets generated, we need to deduct these advanced 10 days from it. This deduction should stop the year after.
    The problem we are finding with these two requirements is that, due to the Anual Leave quota gets generated dialy, we can't get the balance right.
    Thanks in advance!
    Kind regards,
    Alex

    Hello binbingogoABC,
    Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
    Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
    I'm very grateful that you wrote to us with your concerns.
    Sincerely,

  • How do I change an old iCloud I'd when I do not have access to that email anymore?

    How do I change an iCloud ID when I do not have the email account anymore and i do not remember the password?

    If your device is signed into an old ID of yours that is an earlier version of the ID you want to sign in with, do the following:
    If you are using iMessage and FaceTime, make sure you are signed into these services with your current ID.  If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
    Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.)  Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID).  Then save any photo stream photos that you wish to keep to your camera roll (unless you are using iCloud Photo Library).  When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address back to the way it was.  Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

  • Why does my Safari homescreen shortcut on my iPad NOT have a url address bar or the ability to open a new tab?

    Why does my Safari homescreen shortcut on my iPad NOT have a url address bar on top or the ability to open a new tab?  When I open my homescreen shortcut and click on a link which would normally open a new tab I get the white screen od death ( in Safari).  ???
    thanks.
    pedro

    1. Settings>Safari>Clear History, Cookies and Data
    2. Hold the Sleep/Wake and Home button down for about 10 seconds until you see the Apple Logo

  • Hello, since the update, and for three days no longer have access to the apple tv to my tv series bought why? I can play them on ipad but not have access to these series on apple tv

    Hello, since the update, and for three days no longer have access to the apple tv to my tv series bought why? I can play them on ipad but not have access to these series on apple tv
    Thanks

    What model of Mac? Mirroring will require a model from 2011 or later, running OS X 10.8 or later
    About AirPlay Mirroring in OS X

Maybe you are looking for