Why authorization object M_MSEG_LGO for MB1B (MTy 301) is not symmetrical?

When transfer posting (MB1B, MTy 301) from storage location 3030 in plant 1000 to storage
location 8000 in plant 1910, authorization object M_MSEG_LGO is checked. The activity is 01,
movement type is 301, storage location is 3030, and plant is 1000. But when transfer posting
(MB1B, MTy 301) from storage location 8000 in plant 1910 to storage location 3030 in plant
1000, the fields of M_MSEG_LGO are also need to be set 01 for activity, 301 for movement
type, 3030 for storage location and 1000 for plant. Why not 8000 for storage location and
1910 for plant? If I set 8000 for storage location and 1910 for plant and do transfer
posting (MB1B, MTy 301) from storage location 8000 in plant 1910 to storage location 3030 in
plant 1000, the system says "You do not have authorization for this transaction in storage
location 3030".

Thank you.
I know the reason now. In SAP standard the authorization for storage locations is not active. We activate the authorization for storage location 3030, but not activate authorization for 8000.
the menu path is:
Customizing(IMG)
- Materials Management
- Inventory Management and Physical Inventory
- Authorization Management
- Authorization Check for Storage Locations

Similar Messages

  • Why M_MSEG_LGO with MTy 301 is not symmetrical?

    when transfer posting (MB1B, MTy 301) from storage location 3030 in plant 1000 to storage
    location 8000 in plant 1910, authorization object M_MSEG_LGO is checked. The activity is 01,
    movement type is 301, storage location is 3030, and plant is 1000. But when transfer posting
    (MB1B, MTy 301) from storage location 8000 in plant 1910 to storage location 3030 in plant
    1000, the fields of M_MSEG_LGO are also need to be set 01 for activity, 301 for movement
    type, 3030 for storage location and 1000 for plant. Why not 8000 for storage location and
    1910 for plant? If I set 8000 for storage location and 1910 for plant and do transfer
    posting (MB1B, MTy 301) from storage location 8000 in plant 1910 to storage location 3030 in
    plant 1000, the system says "You do not have authorization for this transaction in storage
    location 3030".

    Thank you.
    I know the reason now. In SAP standard the authorization for storage locations is not active. We activate the authorization for storage location 3030, but not activate authorization for 8000.
    the menu path is:
    Customizing(IMG)
    - Materials Management
    - Inventory Management and Physical Inventory
    - Authorization Management
    - Authorization Check for Storage Locations

  • I know why coming ios 7 for ipod 4g. this is not my problem its your problem , please make for ipod 4g

    i know why coming ios 7 for ipod 4g.
    this is not my problem its your problem
    , please make for ipod 4g

    mohammad mhp wrote:
    iknow about this
    i like apple make ios 7 for 128 or 256 RAM
    plz i want it
    Apple would have to strip so many features out of iOS 7 to make it work on your iPod that about all you'd have would be iOS 6 with different icons. So as the others have said, this is not going to happen. If you want iOS 7, you'll need a newer iPod.
    Regards.

  • Why does the "fix" for firefox copying and pasting not work?

    I did the fix a few times and restarted firefox, with no success. Also, I installed the latest version of firefox and it is slower now. I have to use firefox for school, otherwise I would just find another way.

    In what way is Firefox slow?
    Is this all the time or only with loading web pages?
    What kind of fix do you mean with: ''Why does the "fix" for firefox copying and pasting not work'' ?

  • Why won't Adobe open a Pdf? Why do I pay for a service that will not open a pdf?

    Why won't Adobe open a Pdf? Why do I pay for a service that will not open a pdf?

    Maybe you could supply us with more details about what exactly you are doing, how you are doing and what you are using to do it.
    The reason I say this is because you are in the forum for Adobe Reader which is a FREE application and not a service.

  • Update the authorization object value for more than 1000 role

    I need to remove one of the activity value (06) from authorization object S_SCD0.
    I do a search and found out that there are more than 1000 roles which having the activity value = 06 for authorization object S_SCD0.
    However, I don't think I can create a SCAT script to update all these 1000 roles and I believe its going to be a very tedious if I am going to manually change it one-by-one. Hence, I am wondering is there any standard program/function which I can use to automate the above changes for all these 1000 over roles.
    Kindly advise.
    Thanks

    Direct update the table is the easiest way, but should be discourage for the obvious reason.
    Should take a step back, take a long term view, when you need to update 1000 roles, maybe a role redesign might be needed. For example, if you can change the role model to derive role model, once update to the parent role will take care of all the child role.
    Thanks,
    Lye

  • What User authorization objects needed for connecting to SAP from xMII?

    We eneter a SAP user and password for connecting to SAP from xMII to retrieve the metadata of the incoming IDocs.
    When I specify a user with SAP_ALL user profiles, the IDocs are received properly in xMII. If I specify a user with privileges to run only certain transactions, IDocs are not received in xMII.
    What user authorization objects are needed for this user to connect to SAP from xMII?
    Thanks,
    Sara

    Sam,
    I turned on the SAP System trace for this user and figured out the following auth. objects are required for receiving IDocs in xMII:
    C_TCLA_BKA
    S_RFC
    S_CTS_ADMI
    B_ALE_MAST
    S_IDOCDEFT
    The following auth. object is required for making JCO call to SAP from xMII:
    C_AFRU_AWK
    Thanks,
    Sara

  • Authorization object A_S_GSBER for Business area

    Dear group Members Warm Greetings
    Transaction code z_am_detail was added to the role from tcode pfcg .SAP proposed new values for certain organisation levels for example: the authorization object A_S_GSBER. The values proposed by the system for business area field are: 1000, 2000, 3000 & 9000. which are old, the 2 new business areas that were recently configured are not proposed which are 5000 & 6000. This could mean that there is some configuration setting with which the system suggests default values.
    Suggest me to fix this issue
    regards
    shamulheq
    Edited by: shamulheq on Mar 16, 2010 6:27 AM

    Hi Tipu,
    Have you tried creating Screen Variant  from the same Transaction SHD0.
    Try to create a screen variant for the Free Selection screen
    Program : SAPF110V
    Screen No: 0203
    Field Name  : F110V - TEXT1
    There is an option which saves the Variant "With Content"  & "Required", fill the Field Selection with "BSEG-GSBER" and check these check boxes.
    Hope this will work.
    Regards
    Andrew

  • Authorization object required for materail and vendor.

    Hi All,
    I have Z report where material and vendor are there on the selection screen.I need to put authorization check on materail and vendor. Can u plz suggest which authorization object I should use for this?
    thnks
    MSi

    On the other hand, assuming your program will run in a properly maintained SAP installation, I would always use standard authorisation objects as much as possible. Try finding a standard SAP report with similar selections and output and see how it is done there. Trace the execution via ST01 and see which objects are being checked.
    Also use the repository infosystem to browse the available standard objects. Talk to a functional and/or security expert to clarify your requirement regarding necessary authorization checks.
    Thomas

  • Authorization object creation for transaction MIGO

    Hi,
    We have created the auth object for acct asignment category with values as activity & acct assignment category.
    But when assigned to respective users, its still allowing to perform the transactions.
    Basically I am using this object for doing Goods Reciept tcode MIGO.
    As in if auth object carries value 'K' in this object i.e. for cost center then other user with value 'P' i.e. project wont be allowed to perform the MIGO for POs with 'K'.
    Kindly tell me the specifications for the auth object, so that it will restrict users from performing the MIGO.
    Regards,
    Krutika

    hi!
    1) identify the infoobject which must have restricted access. I think it is Profit Center in your case or may be PSP element
    2) in infoobject maintainance screen check Whether it is marked as Authorization relevant(RSD1)
    3) goto RSSM and create a new authorization object and add your infoobject to it.
    4) in PFCG role maintainance screen add create a new role Project Management and addt eh users to it. under the authorizations tab go to maintaina authorizatioons and add your authorization object that you create in RSSM. and maintain the correct values with in it.
    with regards
    ashwin

  • Default Authorization object P_ABAP for PA20

    Dear colleagues!
    After SP implementation roles werу adjusted and new authorization check for P_ABAP was added for transaction PA* (PA20, PA30...).
    Where is hr-reporting checks in these transactions? It's critical for personnel data maintenance or used only for sub-menu reports?
    Trace for PA20 shows the following values for P_ABAP check (PA20-Goto-Planning Data-...):
    P_ABAP     RC=12 REPID=SAPMP50A;COARS=2;
    P_ABAP     RC=12 REPID=SAPDBPNP;COARS=2;
    SAP Release ERP 6.0 EHP4 (10 stack)
    Regards,
    A.M.

    Hi,
    The values mentioned for P_ABAP here is not necessary to be added in a role. SAPDBPNP is a logical database and providing P_ABAP with degree of simplification (COARS) = 2 is very dangerous, as it will bypass any authorization check while executing reports related to that logical database.
    Providing such values will disturb your entire authorization design as even though you might restrict an user on few Infotypes in P_ORGINCON, but with this value, it actually bypasses any report using this logical database to check for Infotype authorization or structural auth restriction.
    To suggest a possible solution, I would like to know exact activities intended to be done with PA20 and level to access provided in P_ORGINCON. Please can you share that here?
    Thanks,
    Deb

  • Why Open / Save dialog for a download file does not work in IE

    Hi
    have a problem of opening the file downloaded in IE. However I am able to save it to my desktop and open it. I am not able to directly open it when I click on OPEN button.
    when I do some research, I have found that the file is getting saved at …. C:\Documents and Settings\skadiy000\Local Settings\Temp
    where as IE 6.x is looking at ….. C:\Documents and Settings\skadiy000\Local Settings\Temp\Temporary Internet Files\Content.IE5\some new folder
    Working well with Firefox 3.x.
    I am using Spring 2.5 with Spring WebFlow 2.0.3 and JExcel.
    Appreciate inputs.
    Thanks in advance

    Hello Patrick,
    I've used the file browse item in the IE6 environment in the past, and I'm using it today with IE7, without any problems, so I don't think this is an IE bug. I also don't think it has anything to do with the popup blocker, as the save window is a modal one, and not a popup.
    I can't think, right now, of any specific security parameter that will prevent the opening of the save window, but if the other computers you tried this page on, are all connected to the same network (for example) I would start looking there.
    Regards,
    Arie.

  • Why is the lensprofile for Sigma 15-30 mm not available?

    All kinds of profiles allso for Sigma but not this one.

    At the time that we began the joint lens profile project with Sigma, we had to make a call as to which set of lenses to support (given the extensive lens line).  We made the decision to proceed with profiles for current lens models only.  At that time, the 15-30 had already been discontinued, so it was not included in this list. 
    As others have noted above, the current options are (1) use Adobe Lens Profile Creator to build your own profile, or (2) to use the Adobe Lens Profile Downloader to check if someone else has already built a profile.

  • Why is iCloud sync for Mail, Contacts and Calendar not in effect after Apple repair?

    ... and how to restore it on my iMac? My other 2 devices, MBook and iPhone sync fine.
    Thanks a lot,
    Raphael

    Hi treetopguy2028,
    I apologize, I'm a bit unclear on exactly what you are referring to when you say that iMessages does not sync. If you are talking about just iMessages proper (iMessage chat messages to other Mac/iOS users, not including SMS/MMS text messages from non-iOS phones), you may want to check that your Apple ID and phone number are correctly linked and configured, as outlined in the following article under the section labeled Use iMessage and FaceTime with multiple devices:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
    If you are referring to syncing all messages in iMessage, including SMS/MMS text messages, that would be a function of the new Continuity feature in iOS 8. In that case, this article may be more helpful (Note: Continuity requires iOS 8 on your devices and Yosemite on your Mac):
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Regards,
    - Brenden

  • Why is Firefox unavailable for Android tablets that do not have the Android market?

    I own a Padigital Planet Android tablet, which can not use Google's Android Market, but the only link for Firefox for Android points to Google's Market.

    Hi,
    The Pandigital Planet tablet doesn't meet the minimum requirements for Firefox Mobile support and isn't currently listed as a supported device. For minimum requirements, see
    https://support.mozilla.com/kb/will-firefox-work-my-mobile-device
    Following is a direct link to the application, but note that you may not receive update notices in the future so you'll have to keep Firefox up-to-date manually (if it is even compatible, which I believe it is not). http://bit.ly/fennecftp
    Thanks,
    Michelle

Maybe you are looking for