Why AVMS 2.0.2.1 is always growing disk space on temp directory?

Hi,
I have 2 PVC2300 cameras being recorded by AVMS 2.0.2.1 on a network mapped drive that resides on a Cisco NSS3000. I first installed surveillance software on a Windows 2003 server and started to notice that eventually after a few days of recording the free space on C:\ was running out. I tracked the files that were consuming this space to c:\windows\temp\HTT167.tmp or some similar filename, apparently this files appear when I have the main console recording enabled, and they keep growing until diskspace runs out affecting not only the recording but everything that runs on that same machine.
Then I'installed on a windows XP machine to see if the situation got different, but no, same result with that files growing constantly.
Is this normal behavior? should I tune up something to get it working the right way?
Thanks!
Elias.

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
This is not the first time that I have heard someone ask this. I personally have not experienced it, but I am working with the development team to try and replicate this.
Any additional info, screen-shots would be helpful. Please e-mail it to me at [email protected]
Thanks
Eric Moyers
Cisco Network Support Engineer
CCNA, CCNA-Wireless
1-866-606-1866

Similar Messages

Why dose my new iPad (bought today) alway lock up

why dose my new iPad (bought today) alway lock up when i use the acoustic guitar when I use GarageBand???
it locks up so bad If I turn it off nothing happens, the only fix is to hooking it up to my iMac
really ******* me off
anyone else have this problem?
its the new 32 Gb wifi (NOT the G3)

Airplay needs to be enabled on ATV. Both need to be on the same network. Then you double tap (or swipe up) to bring up the multi-task bar and swipe (left to right motion) to get to the volume/brightness and airplay controls. Select ATV and toggle ON mirroring.
Some tips
http://support.apple.com/kb/TS4215

I have a Free Agent external backup hard drive connected to my iMac Intel desktop via USB. Why do I get an error message, from time to time, upon startup stating: "disk was disconnected improperly, always eject disk before disconnecting"?

I have a Free Agent external backup hard drive connected to my iMac Intel desktop via USB, I never unplug it. Why do I get an error message, from time to time, upon startup stating, "Disk was disconnected improperly. Always eject disk before disconnecting."?

I never unplug the external harddrive, and the error message comes up only occassionaly upon startup. Maybe the USB connection gets disrupted enough to cause the computer to see it as disconnected and then reconnected while the iMac is powered.

Why black command dialogue(PILOT Client TCP) always popup, SSM7.5 ?

When clients access to SSM through browser, on the server start pop up command dialogue and won't disappear.
Why black command dialogue(PILOT Client TCP) always popup, SSM7.5 ,?

Hi,
Are you using CPIP? I believe this only happens when using CPIP, and those windows represent the connections that are made from the Interactive Publisher to the PAS models.
You should actually consider using JPIP, which gives you more control of the connections to PAS.
In case you want to use CPIP, it is recommended that the service "SAP Service Extended Listener " has the option "Allow service to interact with desktop" active, which will then translate in those PILOT Client TCP windows appearing in the server.
Best regards,
Ricardo

Why do my MAC Microsoft Office printouts always issue me an additional print copy of the Filename, author, date, minutes, words etc? It is wasting ink and paper. What can I do to remove this?

Why do my MAC Microsoft Office printouts always issue me an additional print copy of the Filename, author, date, minutes, words etc? What can I do to remove this? It is wasting ink and paper.

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

Why is it that the calendar colour always returns to purple when I have changed it to green

why is it that the calendar colour always returns to purple when I have changed it to green

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Why does at certain times my applications always crash ?

Why does at certain times my applications always crash ?

All I can suggest is to make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

HT5622 Why an amount of Rs 60 is always deducted for using apple id?

Why an amount of Rs 60 is always deducted for using apple id? Is it necessary to make payment of Rs 60 everytime for downlading free app from apple apps store?

Are you adding or changing your credit card details on your iTunes account on each purchase ? If you have then each time that you do so a small temporary store holding charge may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
Store holding charge : http://support.apple.com/kb/HT3702

HT204053 why can my phone boot up,its always asking me to connect to itunes

why can my phone boot up,its always asking me to connect to itunes

In that case, you're going to have to put the phone into recovery mode and restore it as a new device. The only other option is to connect it to the PC it normally syncs with and restore it, but it sounds like that's not a possibility.

Why do the icons on my desktop always move wen I log out?

If i have for exmaple my documents on my desktop wen i log off and log back in it is a different position to where i had left it.
Why does this happen?

I used a retail disk to instll Tiger.
I did disconnect all peripherals before the instillation except for the keyboard and monitor, Apple 23" HD flat panel.
I rand Disk repair and repaired disk permissions from this disk.
I tried disableing Magic Mouse.
I looked at finder crash and crashing and found some info on deleting preferences in the library and tried deleting the ones mentioned.
I thought running DiskWarrior v 3.03 was helping but I was mistaken. DW did stop the window labelled Computer and showing my HD and network from coming up whenever the other items blinked.
Nothing helped.
Any other suggestions would be welcome.

"Error:Out of Disk Space" message. Why?

I've been using an Apple G4 with FCP2 to capture footage through a Sony DSR-11 deck. I've set up a LaCie 500GB 7200, with most of its 500GB available, as capture disk. As late as last summer I used this system to capture 70+ hours of footage which was then edited on another system.
This time I've met only problems. I've tried capturing 5 different DV tapes. They seem to be capturing but at the end of the hour I get the message "Error: Out of Disk Space".
Does anyone know why this might be happening? I've checked the set up and everything seems in order. (These tapes are 4:3, the ones captured last year were 16:9 DV, so the only adjustment I had to make was un-checking "anamorphic".) I even tried capturing to the MAC hard drive to see if the problem was the LaCie drive, but I get the same same message. (The LaCie I've been using had been full with last year's capture scratch and the disk had been erased through LaCie's Silverlining program, so for a while I began to think that this may be the problem; that maybe I'd have to reformat the disk, etc. but this test seems to rule that out.)
Thanks.
John

Since I last wrote I’ve changed hard drives, run tests on them, as well as trash my preferences, which I did earlier. Still, if I try to capture a tape (to disks with up to 460 GB available) I get the message “Error: Out of Disk Space”. The only thing I can think of doing now is deleting and then reinstalling the Final Cut software.
Here I’m kind of dumb and don’t want to make any mistakes. This Apple has been a stand-alone computer used only for Final Cut and the software was installed when I got it. The rest of my life has been conducted on a PC. So is there anything I should do before deleting Final Cut? Should I be doing anything to protect exiting project files, captured clips, thumbnail cache etc.? Will Final Cut just recognize these when I re-install? What do I do? Just open the Mac hard drive, identify the Final Cut application and drag it to Trash? Do I need to empty the trash first or should I leave it there for safety?
I look at the instructions that came with my ancient Final Cut 2 disks. Here’s what they say in full:
To install QuickTime, follow these steps
1) Insert the Final Cut Pro CD in your CD drive. (I see I have two disks: one “Final Cut Pro 2”, the other “Final Cut Pro 2:Tutorial Media” Do I need to install the second?)
2) Double-click the CD’s icon, then double-click the QuickTime Installer folder.
3) Double-click the QuickTime Installer icon and follow the onscreen instructions.
4) When the Choose Installation Type window appears, select Custom, then click Continue.
5) In the next window, click Select All, then continue
This replaces any previous versions of QuickTime and ensures a complete installation of all components required by Final Cut Pro.
6) When a message appears saying installation was successful, click Restart.
Is this all straightforward or might there be any potential pitfalls in the above instructions for someone unfamiliar with installing software on a Mac (In my case old software and an old Mac – a G4)? I guess I should also ask if you folks out there agree that re-installing Final Cut may be the answer to my problem, that this error message is the result of a glitch that has arisen in the installed version of Final Cut.
Thanks in advance for any help.
John

Why does fix capitalization work when there is only one space after the period in pages 09?

why does fix capitalization work when there is only one space after the period in pages 09? For example: "Turn on 3rd St. After the traffic light." There is only one space after the period in "St." shouldn't it only auto correct after TWO spaces..?? the word After, should be after..

You may also use a noBreak space after the period at the end of the abbreviation.
If I remember well, in such case the capitalization will not apply.
Yvan KOENIG (VALLAURIS, France) mercredi 27 avril 2011 23:34:46

Why XI keeps filling disk space

Hi guru,
I have installed XI 7.0 and upgrade to SP11. just after the successfully upgrade to SP11, I check the disk and there is 8G space. 2 monthes passed, now only 200M space left. I then deactviate all adapter and no message is processing by XI, but XI still keeps filling disk space, I want to know why.
besides, could you tell me normally what components are filling disk space. AE? IS? SLD?.....

Hi, Chen
Well, usually J2EE stack's logs have maximum size limit. So, it
is not the reason.
Regarding ABAP stack, for some reason, ABAP's dev traces grows
over GB sometimes.
So, could you check under the folder /usr/sap/<SID>/DVEBMGS00/work and
trace files?
Good Luck
Sejoon

Why is my available hard disk space disappearing?

Hi,
Occasionally my hard disk space will start disappearing for no apparent (to me) reason. I'll have 15 gigs of available hard disk space that will disappear, and I'll get messages that I'm running out of disk space, interfering with what I'm doing.
After I restart my computer, it seems to reset, but I would like to stop it altogether (as, obviously, it's not always convenient to restart my computer in the middle of tasks.)
I tried Disk Utility, but it didn't find anything. Are there any other legit programs I should use to solve this and other general issues?
Or is it something I could fix myself (with only basic computer knowledge)?
Thanks!
L

1. Empty Trash.
    http://support.apple.com/kb/PH10677
2. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
3. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
4. For more on this and very helpful tips:
    http://pondini.org/OSX/DiskSpace.html
    http://pondini.org/OSX/LionStorage.html

No free disk space on my Macbook Pro- why?

Hi, i'm having a lot of trouble trying to free up disk space on my mac!
I have 120g HD with 8G RAM. I'm using OS X 10.8.5
Disk Usage on Activity Monitor says i have used 110.29G and only 10.18G free, which i find ridiculous! I have backed up my computer with an external hard drive, have deleted all of my unused apps (like Photoshop and some Microsoft office programs), movies, work, and most of my photos to free up space, leaving only photos, music and a few small word files here and there on my computer, yet i still have no space!
'About this mac' shows 62.97G of 'other' storage being used.. what could this be??
I have used apps like Trash It, CleanGenius and AppTrap to free space, but nothing seems to be working! The app CleanGenius enabled me to get rid of duplicate files and i managed to get 17GB free, but after i restarted my computer it went back down to 10GB! Why?!
On Disk Utility i have used the verify disk permissions, repair disk permissions, and verify disk functions but to be honest i don't think it made any difference.
I have used terminal to free cache's and clear the sleep-mode file that the mac makes.
Any suggestions would be fantastic as i don't understand why i still don't have any space!! I've been trying for weeks! Fr
Please help!!

‘Other’:
http://support.apple.com/kb/HT6047

Why AVMS 2.0.2.1 is always growing disk space on temp directory?

Similar Messages

Maybe you are looking for