Why Bandwidth is not reserved for incoming interfaces?
Hi,
When i put show mpls traffic-eng topology command i see reservation only on outgoing interfaces of the router. Why? Why not the incoming interfaces?
link[0]: Broadcast, DR: 3.3.3.53, nbr_node_id:12, gen:40
frag_id 1, Intf Address:3.3.3.35
TE metric:1, IGP metric:1, attribute flags:0x0
SRLGs: None
physical_bw: 100000 (kbps), max_reservable_bw_global: 75000 (kbps)
max_reservable_bw_sub: 0 (kbps)
Global Pool Sub Pool
Total Allocated Reservable Reservable
BW (kbps) BW (kbps) BW (kbps)
bw[0]: 0 75000 0
bw[1]: 0 75000 0
bw[2]: 0 75000 0
bw[3]: 0 75000 0
bw[4]: 0 75000 0
bw[5]: 0 75000 0
bw[6]: 0 75000 0
bw[7]: 0 75000 0
link[1]: Broadcast, DR: 2.2.2.32, nbr_node_id:3, gen:40
frag_id 2, Intf Address:2.2.2.32
TE metric:1, IGP metric:1, attribute flags:0x0
SRLGs: None
physical_bw: 100000 (kbps), max_reservable_bw_global: 75000 (kbps)
max_reservable_bw_sub: 0 (kbps)
Global Pool Sub Pool
Total Allocated Reservable Reservable
BW (kbps) BW (kbps) BW (kbps)
bw[0]: 0 75000 0
bw[1]: 0 75000 0
bw[2]: 0 75000 0
bw[3]: 0 75000 0
bw[4]: 0 75000 0
bw[5]: 0 75000 0
bw[6]: 0 75000 0
bw[7]: 70000 5000 0
Link 1 reservation is there but on link 0 NO RESERVATION. Why? Since link 0 is incoming interface and Link 1 is outgoing interface.of the tunnel.
Hi Ankur,
That is because MPLS TE Tunnels are unidirectional.
So they are setup only in one direction from source to destination.
Consequently the resources reserved for a particular tunnel are reserved in one direction only.
So you might want to setup a tunnel in the opposite direction as well.
adam
Similar Messages
-
I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?
A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing! -
Why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?
Hi All,
Does anyone know why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?
I just found this out after I installed bootcamp and Windows 7 on my Macbook 13" with P8600 2.4Ghz CPU 2GB RAM and 250G HDD after more than a year of using it.
After I installed the CPU monitoring widget on Windows 7 and CPUZ, I noticed that the lowest Freq that my Macbook operates even with <5% CPU load is only 1.5Ghz and VID @1.0V.
I installed Coolbook on OSX to confirm what I saw on Windows. I was surprised that SLFM is not visible in Coolbook which is the same result I got from Windows 7 CPU monitoring widget and CPUZ.
I checked with our local Mac support and they got the same results for all of Macbook 13" Aluminums late 2008 model. SLFM is not visible on Coolbook which means, it is not enabled.
I tried to install Coolbook on my wife's Macbook Pro 13" 2010, which has the same spec, P8600 2.4Ghz CPU and 250G HDD. The only difference is the memory which is 4GB RAM. There, SLFM is enabled and works just fine, running at 798Mhz @0.875V.
Can anyone please help confirm if this is really the case for Macbook 13" late 2008 model?
Because I checked the Intel P8600 Datasheet and SLFM should always be enabled. Otherwise, it will affect battery life as well as long term reliability of the CPU.
I would appreciate if the Macbook and Macbook Pro owners in this forum can help confirm using Coolbook the status of SLFM in your own Macbooks. You may use any other tool in checking the SLFM and share it with us if you believe it is more reliable and better than Coolbook. Thanks.
Message was edited by: jespadaBTW, Here is what I got from Coolbook for comparison. As you can see the late 2008 Macbook has no SLFM info.
Legend:
SLFM - Super Low Freq Mode
LFM - Low Freq Mode
HFM GV - High Freq Mode (Geyserville/Speedstep)
HFM - High Freq Mode
Macbook 13" Aluminum late 2008 P8600 2.4Ghz 2GB RAM 250GB HDD
Freq VID
SLFM -- --
LFM 1596Mhz 1.0000V
HFM GV2 1862Mhz 1.0500V
HFM GV1 2128Mhz 1.1000V
HFM 2394Mhz 1.1375V
Macbook Pro 13" Aluminum 2010 P8600 2.4Ghz 4GB RAM 250GB HDD
Freq VID
SLFM 798Mhz 0.8750V
LFM 1596Mhz 1.0000V
HFM GV2 1862Mhz 1.0500V
HFM GV1 2128Mhz 1.1000V
HFM 2394Mhz 1.1375V
Message was edited by: jespada
Message was edited by: jespada -
Why does 'User not registered for online use' show up when I try to import a cd into itunes? None of the cd info shows up either.
Well, the format I upload from the camera is "video clip" or "video for Windows"...sometimes I've converted them to avi format, too. But as I said, it never even lets me get that far...I never get to even select a clip. As soon as I tell the program to "import/clip" it freezes up before I can even go to the folder that the clips are in. It has only begun to do this recently, and I'd never had any problems like this before. Last night I tried it again, and I clicked "open composition", and it froze when I did that too.
I'm not sure how much more specific I can be about the details of the clips, since I'm positive it has nothing to do with the clips themselves...I'm running Windows XP, though...Home Edition Service Pack 2, Pentium 4 CPU 2.80GHz, with 504 MB of RAM. I have had the automatic updates turned on since I did my last reformat a couple of weeks ago. Could it have something to do with some kind of an update it may have done? -
My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?
Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion. There should be a row of icons at the top of a grey field. if the quarter-moon icon is bright white, tap it. If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.
-
Can anyone help. My new iPhone 5S does not ring for incoming calls. It vibrates. How can I get ringer to work?
Hello lyngos,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS2802
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
Best of luck,
Mario -
Why skype is not available for NOKIA ASHA 311
Why skype is not available for nokia asha 311? I had searched many sites and even in skype official site but cant download!!!! Not available even in NOKIA STORE. HOW TO DOWNLOAD SKYPE FOR NOKIA ASHA 311?
Solved!
Go to Solution.palani6 wrote:
Why skype is not available for nokia asha 311? I had searched many sites and even in skype official site but cant download!!!! Not available even in NOKIA STORE. HOW TO DOWNLOAD SKYPE FOR NOKIA ASHA 311?
Skype has not published a native version of its messaging application for Nokia Series 40 devices. Therefore, it is not possible as of this moment. -
Why filters are not awailable for my objects?
Why filters are not awailable for my objects?
Based on your screenshot preview, I can see that from your Elements panel, you are using an external .html file, correct?
Some in-app Properties are not available for external, non-managed files.
If you create a new project (File > New), for example, add an element you will have full access to Edge Animate properties.
If you create a htm5 doc in Dreamweaver, for example, and open that in Edge Animate then you are limited - because the originating file (.html) is from another application.
Hope this helps, clarify.
Darrell -
Why sports tracker not available for N97
Why sports tracker not available for N97? One of the most expensive nokia phones without sports tracker. Its weird.. nokia whats happening, dont disappoint N97 customers
A quick google or a look in Betalabs will tell you that Nokia diverged Sports tracker last year so it is no longer "Nokia" http://runningdigital.com/2009/10/21/nokia-sports-tracker-update-sports-tracking-technologies/
Nothing on their site yet http://www.sportstrackingtechnologies.com/, but presumably something will pop up on Ovi Store in the future. -
why pages is not free for me, i´m just update to maveriks but i can´t download pages, keynote or numbers for free, why?
The update is available for those using iWork '09. If you have never previously purchased iWork ’09 and have not bought a new Mac since October 1, you will have to purchase the applications. There are several reasons why the updates don't show as free for those who already have iWork '09 installed.
1. You must have iWork '09 apps installed & they must be updated to the x.3 version. You can also download the standalone updater from this page.
2. If you are not using English as the primary language for your Mac, change to English & run Software Update. You can then switch back to your preferred language.
3. Go to Mac App Store (MAS) > Click on Store > Check for Unfinished Downloads. You will need to individually click into each application > Click update > enter in your Apple ID & password and then it will start updating.
4. Open App Store on your Mac & look at the buttons under Keynote, Pages & Numbers. If it does not say “Update” click Account under Quick Links, enter your password & click “View Account.” Next, click the “Reset” button to the right of “Reset all warnings for buying and downloading” at the bottom of this page, & click Done. Check your updates tab & iWork & iLife updates should now appear.
These are the ones I've seen work for others. -
Why is Cfgrid not working for me
I am using CFMX7
Why is this not working for me?
This is Gridtest1.cfm
<cfoutput>
<CFFORM align="center" ACTION="gridtest2.cfm"
METHOD="POST"
name="getstuff" >
<cfinput type="HIDDEN" name="ID" value="#form.id#" >
<cfinput type="HIDDEN" name="customerno"
value="#form.customerno#"
>
<cfgrid name="Mygrid" width="960" query="getpermits"
gridlines =
"yes" rowheaders="yes"
selectmode = "edit" height="350" >
<cfgridcolumn name="id" bgcolor="##FFFFFF" header="ID"
display="yes" WIDTH="40" select="no">
<cfgridcolumn name="permitno" bgcolor="##FFFFFF"
header="Permit
No" display="yes" width="70" select="yes">
<cfgridcolumn name="sortorder" bgcolor="##FFFFFF"
header="SortOrder" display="yes" WIDTH="62" select="yes">
</cfgrid>
<div align="center">
<cfINPUT TYPE="submit" VALUE="Save My Changes"
NAME="savemychanges"
>
</div>
</cfform>
</cfoutput>
This is GridTest2.cfm
Form fields:
<cfoutput>[#form.fieldnames#]</cfoutput>
Form values:
<cfloop list="#form.fieldnames#"
index="idx"><cfoutput>#idx# =
#Evaluate(idx)#</cfoutput>
</cfloop>
<cfif isdefined ("form.savemychanges")>
<cfgridupdate grid="mygrid" datasource = "divwt"
tablename =
"tankerpermits" keyonly="yes" >
</cfif>
<cfoutput>
form.#__CFGRID__GETSTUFF__MYGRID#.original.#permitno#
</cfoutput>
Output from TestGrid2.cfm reflects a �funny
looking� grid name and I
can see in the output that Permitno is definitely a defined
field.
Form fields:
[ID,CUSTOMERNO,SAVEMYCHANGES,__CFGRID__GETSTUFF__MYGRID]
Form values:
ID = 13
CUSTOMERNO = 21691
SAVEMYCHANGES = Save My Changes
__CFGRID__GETSTUFF__MYGRID = __CFGRID__EDIT__=3 id N Permitno
Y
sortorder Y 1 U 571 z
Element __CFGRID__GETSTUFF__MYGRID.ORIGINAL.PERMITNO is
undefined in
FORM.
The error occurred in
C:\cmudintranet\Purple\divwt\bftankertruck\gridtest2.cfm:
line 147
#form.__CFGRID__GETSTUFF__MYGRID.original.permitno#
Thanks in AdvanceLorna, be careful. This could cause your comments
to stop working. Blog comments are
sensitive..................
.......... Lorna says ................................................
Allyson, your precaution comes on the heels of me realizing that if I put a song on a blog summary page, then I will have to edit the .js file every time I add a blog entry.
Whereas MassReplaceIt could solve the problem there, the added issue of problems with comments is enough to make me stay away, so that is what I will do: No music within 250' of the blog guy.
Lorna in Southern California -
HT204032 Why is Powernap not available for other MB's such as the MBP mid 2010 model for example?
Why is Powernap not available for other MB's such as the MBP mid 2010 model for example?
I have a 2010 MBP 6,2 with an aftermarket SSD. My machine gets mail and notifications while asleep, but I do not have any powernap pref box in energy savings under 10.9.1
I do not have an Apple SSD. I have a Crucial M4-CT512M4SSD2
Apple did replace my MB last Fall under the video fault problem (for free after 3 years.....thanks Apple), but it stills identifies as a 6,2 Boot ROM MBP61.0057.B0F
I wish I could shut off this powernap feature, but have no access to it. -
Why is Safari not available for offline reading?
Why is Safari not available for offline reading?
You load the article from the Reading List? (tap to enlarge image)
-
Why is Cardstar not available for my Q10??????
Why is CardStar not available for my Q10??
Hello,
BB does not choose the apps that will run on their devices. Rather, the app developers choose the platforms and OS levels that they will support their app on. So, the best place to pose your question is to the app developer...for it is their decision as to supporting your platform.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
There are a few tv shows that played this week that are not available on itunes from tnt. Why are they not available for download. We watch these each week, and I have checked to be sure that there was actually an episode this week, and there was.
Under other "sync-able" players, there's usually the "Sync only checked items" radio button. Not for the 2.0 Apple TV. There's no option, but acts as though that option ("sync only, etc...") has been selected. Figured it out after an hour of walking back and forth from my Mac to the TV. Argh.
Try it. De-select the shows, sync the AppleTV and look under the "TV Shows" and the one's you've unchecked will not be there.
R,
the wedge
Maybe you are looking for
-
Roaming Profile are not stored completely
Hello NG In our environment we work with NWClient 2 SP1 IR9, ZCM11 SP1a and Roaming profile is activated by a ZCM policy. Now we have the problem, that when a user logout from the workstation, the roaming profile is not stored completely to the home
-
Best way to manage large photo library
I currently use iPhoto to manage my 14,000+ images, but I am experiencing a few problems with it and wonder if ALR is a better alternative. My computer is running more and more slowly every time I add more to the library. I am worried it will crash t
-
Need to find "real" width/height of loaded SWF
So, I'm creating a player that will eventually be able to play back both FLV and SWF files. While testing the SWF functionality, I noticed some funkiness with resizing the SWF once loaded into a movieClip. Yes, I already do know that loading (via Mov
-
Workflow Builder [Tcode: SWDD] - Navigation Area...
Hello everyone, Quick question: I just inserted a step in an already existing workflow using the drag-n-drop user interface facility and, from a graphical point of view, the step was inserted exactly where I wanted it. However, in the "Navigation Ar
-
Hi. Does anyone have any suggestion as to why I can view a particular .png file on my server when I enter its URL into my browser manually, I can also view the .png image on the server during development in iWeb, but when I upload it to my server the