Why black command dialogue(PILOT Client TCP) always popup, SSM7.5 ?

When clients access to SSM through browser, on the server start pop up command dialogue and won't disappear.
Why black command dialogue(PILOT Client TCP) always popup, SSM7.5 ,?

Hi,
Are you using CPIP? I believe this only happens when using CPIP, and those windows represent the connections that are made from the Interactive Publisher to the PAS models.
You should actually consider using JPIP, which gives you more control of the connections to PAS.
In case you want to use CPIP, it is recommended that the service "SAP Service Extended Listener " has the option "Allow service to interact with desktop" active, which will then translate in those PILOT Client TCP windows appearing in the server.
Best regards,
Ricardo

Similar Messages

Why should client PCs always know the default gateway?

Considering that my home computer has only one connection and it is to my ISP,
why does it need the default gateway to be configured (being DHCP client)?
Where else my connection can be deviated from this unique connection cable?
Is it possible to configure a router to which my PC is connected and, then,
the client PCs would not need to be configured with default gateway?
Or client PCs always have to know default gateway?
Why?

How IP Packets are Routed on a Local Area Network
http://www.anitkb.com/2010/06/how-ip-packets-are-routed-on-local-area.html
Thanks, this helps but still confuses.
The article tells:
" Now that WK1 has WK2's MAC, it can send the packet directly to WK2"
A)
I do not understand what does it mean if computer has one outgoing network cable to switch.
It is switch who has different connections and, thereafter, can commutate different communication circuits.
So, I can only understand that WK1 somehow tells to switch to connect him directly to WK2 but not to router.
How?
B)
Were WK1 and WK2 connected directly to a hub, instead of switcher, would they be able to communicate directly?
(The definition of a hub is that it takes a signal and broadcast it through all connections)
C)
Also, reading about switch-router-hub, I cannot understand which role is played by a client computer in communication
(of a hub, of a switcher?)?  Neither of them? What?
A. I believe a fundamental understanding of what a switch and the differences and the similarities between a hubs, bridges and switches, as well as the OSI model, may be helpful at this time.
First, the OSI model is an industry standard defining how hosts communicate with each other. There are 7 layers. THe bottom layer has no intelligence and is the physical connection. As you go up the ladder, the intelligence increases.
7 Application (Application Gateways, Proxies, etc, operate at this level)
6 Presentation
5 Session
4 Transport (TCP, UDP, SPX live here and operate at this layer, NAT overlaps 3 & 4)
3 Network (IP & IPX live here. NetBEUI and DLC overlap 3 & 4. Routers operate at this layer)
2 Datalink (MAC addresses live here. Bridges and Switches operate at this level)
1 Physical (Hubs operate at this level)
Hubs, Bridges and switches allow ethernet hosts to communicate with each other, no matter what protocol is being used, whether TCP/IP, IPX/SPX, NetBEUI, DLC, etc.  They transmit packets on the network.
A hub is a Layer 1 device. It is a dumb device blatantly allowing all hosts to communicate to each other with no discerning source or destination addresses, whether MAC, IP, IPX or any other factor, in the packets.
A bridge is a Layer 2 device. It bascially has two interfaces connecting two network segments together. If a host on one side of the bridge, we'll call that SegmentA, is trying to communicate to another host on the same SegmentA, the
bridge will not allow the traffic to go to the other segment on its other interface, SegmentB. This helps reduce unnecessary traffic and reducing collisions, which slow down the network. If the host on SegmentA is communicating with a host on SegmentB, the
bridge allows the traffic. This is because a bridge has enough intelligence to read the Link layer, which has the MAC address (the physical address) of the interface or network card. It can read the source and destination MAC and determines whether to allow
that traffic across or not depending on where the source MAC is and where the destination MAC is.
Switches are basically multi-port bridges. When a switch intializes, it reads the MAC addresses of all connected devices and creates a "destination table." Notice I didn't say "routing table" since that is associated with IP addresses.
Therefore, if a host on port# 14 on a switch needs to communicate with a host on # 33 on the switch, the switch reads the source and destination MAC address in the Datalink Layer (Layer 2) and knows the destination is on port# 33 based on the destination
lookup table it created of all connected devices. It will then only send this traffic between the two ports. This essentially reduces unnecessary traffic on other ports increasing efficiency.
There are also Layer 3 Switches. They are combination switches and routers that can be managed where you can configure each port to either be switched or routed.
So to answer your questions:
A)
I do not understand what does it mean if computer has one outgoing network cable to switch.
It is switch who has different connections and, thereafter, can commutate different communication circuits.
So, I can only understand that WK1 somehow tells to switch to connect him
directly to WK2 but not to router.
How?
As explained, the switch simply discerns traffic by MAC address. The client side TCP/IP subsystem using the ANDING process, as I've explained earlier, and JM's blog explains, determines where the computer is sending the packets. A computer does not "Tell"
the switch or hub anything. It simply dumps the packet on the wire and the switch reacts to what it finds in the Datalink layer, and if a hub, it simply sends the traffic on all ports.
B)
Were WK1 and WK2 connected directly to a hub, instead of switcher, would they be able to communicate directly?
(The definition of a hub is that it takes a signal and broadcast it through all connections)
It's not called a 'switcher.' It's called a 'switch.' As explained, a hub blatantly broadcasts traffic on all ports. It is up to the sending host and receiving host to read all packets and figure out what belongs to it or not. If a destination address doesn't
apply to a computer that hears the data, it simply ignores it.
C)
Also, reading about switch-router-hub, I cannot understand which role is played by a client computer in communication
(of a hub, of a switcher?)?  Neither of them? What?
The computer is simply plugged into these devices. The devices have their job to do, and the computer has its own.
I hope that explains this part of your networking questioning.
Ace
Ace Fekay, MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003, Microsoft Certified Trainer, Microsoft MVP - Directory Services. This posting is provided AS-IS with no warranties or guarantees and confers no
rights.

HT1338 There is a black caption/dialogue box on my screen and I can't get it to stop

There is a black caption/dialogue box on my screen and I can't get

HI,
Can we have a Pic ?
Why do you think it is connected to the Messages App ?
Realistically I would suggest the box is to do with anything but the Messages app.
10:22 PM Monday; October 22, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why the sapscript called as client dependent? y smartform not?

why the sapscript called as client dependent? y smartform not?

Few more reasons why....? Please read below:
SAPscript technology is based on a mainframe product from the 1980s,
while Smart Forms have only been around since (roughly) 2001. With that sort of time gap,
there are bound to be significant differences between the two tools. As you have noted correctly, client dependence is a fundamental one.
Although SAPscript has had some incremental improvements over time,
its forms have always been -- under the hood -- relatively passive objects, with minimal embedded logic.
These forms were designed to be driven and controlled by ABAP programs,
much in the way ABAP programs read in database tables to produce reports;
if you ever download a SAPscript form (e.g., via utility program RSTXSCRP),
and look at the portable text file it produces you'll see what I mean.
Many text objects (e.g., invoice header texts) are bound directly to documents which are client-dependent, so it makes sense for these text objects to also be client-dependent. From a complexity standpoint, SAPscript forms are close enough to these text objects where I can see how it made sense at the time to make them client-dependent too.
Conversely, a Smart Form is significantly more robust and complex. For instance, it can contain program nodes and nested tables with patterns. When a Smart Form is compiled, it generates an ABAP function module and these are always client-independent. This is appropriate, given that this form has more in common with an ABAP program than its predecessor. For instance, when a print program calls a Smart Form, the form itself takes over to produce output, without any further direction from the print program. In fact, the join is so seamless that I often find myself using a Smart Form's Initialization section for logic to handle any data gathering not handled by the print program. I would never even think to attempt this with SAPscript.
Several factors figured into SAP's decision to make Smart Forms client-independent, including customer feedback. There are significant advantages to client-independence. For instance, a change made in one development client happens immediately across all development clients. Among other things, this means we don't have to waste time figuring which client contains the most recent version -- they all do! In addition, transporting Smart Forms is easier, since we can safely bundle them together in the same transport as their client-independent print programs (no worry about mixing client-dependent and independent objects).
Thanks,
Santosh

How to run ADF command-line test-client on standalone weblogic host

I have followed the steps to create a test client for the ADF application. In used the following link:
http://download.oracle.com/docs/cd/B31017_01/web.1013/b25947/bcquerying007.htm
The above link does not talk about how to setup the environment where the standalone weblogic is installed to be able to run the test client.
I can run it in the jdeveloper environment.
I can also run from the command line on the development host, by cut-paste the command from the jdeveloper output log tab.
I am trying to run this client on the machine where we have a weblogic installed (standalone) for testing. We can run our ADF application from the browser with no issues. We want to automate and run some testing related to the ADF model (non-viewcontroller part) from the command line on this test stage.
Which/Where are the ADF libraries?
How can I add our application jar deployed on the weblogic (ear file) to the CLASSPATH?
What other libraries ADF/Weblogic do I need for the command line test client?
What am I missing?
Thanks for any help.
Edited by: mmunawar on Jul 2, 2011 1:03 PM
Edited by: mmunawar on Jul 2, 2011 1:04 PM

create weblogic application server connection from jdeveloper and then Deploy that application through jdeveloper in the weblogic application server and then run it from jdeveloper and see if its working.

Why dose my new iPad (bought today) alway lock up

why dose my new iPad (bought today) alway lock up when i use the acoustic guitar when I use GarageBand???
it locks up so bad If I turn it off nothing happens, the only fix is to hooking it up to my iMac
really ******* me off
anyone else have this problem?
its the new 32 Gb wifi (NOT the G3)

Airplay needs to be enabled on ATV. Both need to be on the same network. Then you double tap (or swipe up) to bring up the multi-task bar and swipe (left to right motion) to get to the volume/brightness and airplay controls. Select ATV and toggle ON mirroring.
Some tips
http://support.apple.com/kb/TS4215

Cisco Trust Agent - Any way to force the client to always be enabled?

We have begun to roll out dot1x configuration on our fleet of switches to support a basic authentication and posture check for our NAC Framework deployment. Previous to this, we spent a couple of months deploying the Trust Agent. In the time between deploying the client, and turning dot1x on the switch ports, some users have un-checked the "Enable Client" option available to them in the system tray icon, and the Wired Client. Obviously when dot1x is applied to the port, the supplicant forwards the authentication request to the client, and waits forever for a response, leaving users trying to login waiting for 20 - 30 mins for the login process to complete. My question is thus, is there any way (registry setting, config file setting) to force the client to always be enabled?
Thanks,
Michael

Z-index Guide:
http://www.smashingmagazine.com/2009/09/15/the-z-index-css-property-a-comprehensive-look/
Nancy O.

Unable to get command line from client!

Does anyone know what this means? My G5 shuts itself down and I don't know what is causing it.
Mac OS X Version 10.4.11 (Build 8S165)
2009-02-12 11:01:19 -0800
2009-02-12 11:01:21.760 SystemUIServer[199] lang is:en
Feb 12 11:01:33 mDNSResponder: NAT Port Mapping (LLQ event port.): timeout
Feb 12 11:01:37 cups-lpd[221]: Unable to get command line from client!
Feb 12 11:10:48 Zelle-Olson cups-lpd[233]: Unable to get command line from client!
Feb 12 11:17:37 cups-lpd[235]: Unable to get command line from client!

Hello golferky,
CUPS stands for Common Unix Printing System and is just one of the many background processes that is running on your system and is of no harm. What you are seeing in your message console is your Mac attempting to talk to a printer you have may have had or still have it connected to.
Here is more information if you want to look into it.
http://www.cups.org/
B-rock

How to create command line java client

I have a java servlet FileClient.java and am invoking it thru POST method from the html file. How can I create command line java client so that I can execute this class file from windows command prompt.
e.g. java FileClient <argument>
TIA

> .. there's also a "won't work".
I could post a sample...I know that you can instantiate and call aservlet,
or even write your own servlet container - butit's
still a local instance. He can't invoke his remote
servlet by calling its class on the client like he
suggested.HttpURLConnection in main.Only if his Servlet has a main method. Which wouldn't really make it a servlet anymore.
OP said he wants to invoke it from command-line using
java -cp . TheServletClass
He said he has a servlet called FileClient. And he can't invoke a servlet directly that way, without building a wrapper that starts it, making it more than a servlet, and it definitely won't execute on the server. That's my whole point. I never wanted to say you can't write a command-line program that invokes a servlet on a remote server. I do it myself after all.
I guess I should have expressed myself more clearly.

Why are commands "grayed out" on edit tab on Elements 9?

Why are commands "grayed out" (not available) on the edit tab on Elements 9?

It’s often awaiting a user action e.g. opening a photo in the main Editor space or making a selection or a new layer or flattening an image or changing bit depth etc.

Redirecting get command inside ftp client?

Is it possible to redirect get command inside ftp client?
I was only able to do "get filename /dev/null" to redirect it to /dev/null.. However.. what if I want to redirect it to a compression or decompression utility?
Example of ftp script I used:
#!/bin/bash
HOST='server-ip'
USER='username'
PASSWD='password'
FILE=$1
ftp -i -n $HOST <<END_SCRIPT
user ${USER} ${PASSWD}
binary
get $FILE
quit
END_SCRIPT
exit 0
The file I am trying to get is a compressed file, I would like to pipe it into decompression utility like gunzip.
Last edited by kdar (2012-09-03 19:33:52)

Solved it. I found that I could access ftp server with wget as well, and redirect it's output to another utility:
time wget --user=username --password=password -qO - ftp://serverName/file.gz | gunzip -cf > /dev/null
Last edited by kdar (2012-09-03 21:32:47)

Ps cs6 why copy command is dimmed - cannot copy obj?

ps cs6 cc :
why copy command is dimmed - cannot copy obj?

lsepolis123 wrote:
if press Ctrl+A selects all psd doc... either (when layer selected - in layers panel) in Move tool or in Select tool, well?
While the marchimg ants shows the layer boundry what you write the whole document. Only the pixels of the targeted layer are selected.
Here are two screen captures.
I have two documents open in Photoshop. One has three layers ob top of the background layer One Red, One Green and one Blue. Thes second one same size but only a white background layer.
I target the green layer did a Ctrl+A to select the whole green layer note the marching ants outlining the whole document composite view. I followed the Ctrl+A with Ctrl+C (copy).
I then switch to the second document just a white background layer and did a Ctrl+V past the bottom screen capture shows the results. Only the green pixels were copied to the clipboard.

Why do my MAC Microsoft Office printouts always issue me an additional print copy of the Filename, author, date, minutes, words etc? It is wasting ink and paper. What can I do to remove this?

Why do my MAC Microsoft Office printouts always issue me an additional print copy of the Filename, author, date, minutes, words etc? What can I do to remove this? It is wasting ink and paper.

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

Why is it that the calendar colour always returns to purple when I have changed it to green

why is it that the calendar colour always returns to purple when I have changed it to green

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Why does at certain times my applications always crash ?

Why does at certain times my applications always crash ?

All I can suggest is to make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

Why black command dialogue(PILOT Client TCP) always popup, SSM7.5 ?

Similar Messages

Maybe you are looking for