Why can I get 4k output from MSI Radeon HD 5450 on Win XP but not Win 7?

A few months ago I bought a msi Radeon 5450 Graphics Card.
I was surprised impressed that I could get 4k output (3840 x 2160) on my SEIKI monitor (via HDMI at 30Hz). This exceeds the specification!!!
However, when I took this Graphics card from my Win XP box and put in Windows 7, I can't run at 4k. The highest resolution choice is 1920 x 1080.
In Win XP, I just had to do "Detect Displays" in CCC and the 3840 x 2160 resolution would show up as a choice.
But when I do "Detect Displays" in CCC in Windows 7, I don't get the 3840 x 2160 as a choice. I only get 1080 as a choice.
I did notice the Catalyst Control Centre (CCC) program between Windows XP and Windows 7 is different.
The Win 7 PC, has an APU (not sure if that has any bearing).
Can anyone advise what I can do?
MSI Card: R5450 - MD1GD3H/LP DVI HDMI VGA 1GB DDR3 Fanless

Did you check if you have the latest VGA driver on Win7?

Similar Messages

Why can i get a connection w/my wireless laptop with this router (WRT54GS ) but not on the desktop?

I have an excellent signal w/this laptop (wireless) but when I try to use the desktop with the same router it wont go. Do I need driver download? Do I need an IP address for the router? I use tech support for connecting the desktop to the internet straight from the modem they sent me but because I didnot buy the router from them, they wont help me figure out once I plug in the router and setup more than one machine, i cant do it. Initailly, I setup everything w/my laptop being the main computer in my home until I got this desktop recently. So knowing the desktop is fine because it works straight from the modem, and the laptop works w/the router and modem hooked up together but not the desktop, what the HECK is the problem? I dont have any cd or anything w/this router because when I moved, i never found the box it came in again. Is there someplace online I can find what I need? Im wondering how I will know if I have a response from someone on this thread? will I get an email from this site? gosh Im confused.
(Mod Note: Email address removed.)
Message Edited by kent07 on 10-28-2009 07:29 PM

How you are trying to use the desktop...wired or wireless?
If you are trying to connect the computer to the router via an Ethernet cable then,try changing the cable.Check the ip address you are getting on the computer...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on OK...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

Why can I receive mail on my iPAD during my visit to the USA but not send mail?

Why can I receive mail on my iPad during my visit to the USA but not send mail?

Double check to make sure that your same email addresses are set up on both devices in the Messages settings. Also ensure that you have text messaging forwarding turned off if you do not want to receive them on your iPad.

I've now had the message "We are still processing your order. It could take up to 24 hours. Please check back later."for 60 hours. Why can I get no answer from the online support and why is Adobe the only online software company that takes days and days t

I'm on a Mac, and Lightroom comes up with "update available, download now", so I go to download it and find that actually it is a paid for upgrade. So I pay for it, and then have to wait days for Adobe to "confirm" the purchase. It the meanwhile the demo which downloaded itself is saying "trial period over" and said that immediately (i.e. no trial period). How do you get Adobe to respond? I can't get an answer?

Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache. If it fails to connect try using a different browser.
Get chat help with orders, refunds, and exchanges (non-CC)
http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

Why can a person buy and/or download Snow Leopard, Lion, and Mountain Lion but not Mavericks???

I am running OS X Lion on a mid 2009 MacBook Pro with 4GB of ram and a 160GB HDD. I was going to download Mavericks from the app store but waited to long. Now that Yosemite is out Mavericks has disappeared from the app store. WHY? A person can buy and/or download Snow Leopard, Lion, and Mountain Lion but not Mavericks??? And the kicker is that it was FREE!!! I just wanted to load Mavericks on my MacBook Pro to see how it performs. If I could live with any slow downs or quirks, I'd leave it installed. If not, I'd roll my system back. Apple's policy of ramrodding unstable product down our throat is BS. I don't want to use Yosemite until it has become more stable!

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.

Can't get iCloud mail on my MacBook Pro. I used to, but not now.

I have been traveling, and using all sorts of servers to get my mail through the mail program on my MacBook Pro (Blue stamp icon). But now I am home, and the problem that started while over the road is continuing.
Under iCloud, the mail icon is checked. Under accounts, the only place blank is the IMAP Path Prefix. Port is 143, and SSL is checked. Authentication is Apple Token. Checked are also "include when automatically checking for new messages" and "compact mailboxes automatically"
Any help to get my mail up and running again?
Thanks in advance.

You're going to have to give us more info than "I can't get net flix to work."
What have you done to try to get it to work?
Have you installed Silverlight?
Have you activated you Mac with NetFlix?
How are you accessing NetFlix? (Browser, Boxee....)
Exactly what is happening?

Why can firefox beta, aurora, and nightly open in windows 8.1 desktop mode but not app mode?

The applications will launch in desktop mode but not in a windows 8.1 app I am hoping for help with this I have tried everything to fix crashing or slowness and have reinstalled the program in aurora nightly or even firefox beta forms. Help!

Hi!
You may want to take a look at https://support.mozilla.org/en-US/kb/how-do-i-install-firefox-windows-8-touch
I would assume the options to switch into it would be the same. I can't confirm though since I don't run Windows 8.

Why can't I hear output from radio and other apps

When I first got my firefox os phone the radio worked great but since installing a couple of apps (Recorder and Piano) I can no longer get any sound out of radio or either of the apps, nor my videos, either via speaker or headphone although both speaker and headphones work fine for voice calls still.
Using firefox os 1.3 on ZTE phone

Thats got my radio back thanks. Need to try again with recorder later.
''peppercat [[#question-1039603|said]]''
<blockquote>
When I first got my firefox os phone the radio worked great but since installing a couple of apps (Recorder and Piano) I can no longer get any sound out of radio or either of the apps, nor my videos, either via speaker or headphone although both speaker and headphones work fine for voice calls still.
Using firefox os 1.3 on ZTE phone
</blockquote>

Why Can't Get Color Images from My ADS Pyro IEEE1394 Camera

This is a list of our equipment :
Windows98SE
LV6.0i
NI-IMAQ for IEEE1394
Advanced IMAQ Library for LV
Pyro IEEE1394 Webcam from ADS
Unfortunately, we do not see any colors in the RGB Modus.
We have visited your perfect support web sites and found a similar description.
Document ID: 2DGHH1SN (09/17/2001)
We used your support tip (change 1394IMAQ.sys and clean-up MAX) and anyway we do not
see colors even though the PYRO IEEE1304 Webcam support color mode.
We think the hardware of both IEEE1394 webcams (Pyro and IBOT) are the same.
Did you received any feedback from the customer whos has the problem with the Orange
Micro IBOT IEEE1394 webcam ?
It is highly interested for us.
We appreciate y
our help and many thanks for reading and thinking about this manner

Dear Keyle,
Thanks for your response. Now, we have a running XP Home Edition Notebook machine.
We have installed first LabVIEW6.0i then ADVANCED IMAQ VISON > IEEE1394 for IMAQ beta2 + MAX2.2 and finally
VISION BUILDER 6.0
We have observe the VISION BUILDER support during the custom installation process of NI-IMAQ 1394 b2 and unfortunately we running in the same problem and could not use the great VISION BUILDER together with our
IEEE1394 camera. We see a big opportunity to develop our apllications faster and improve the time to market.
It is possible to enclose the difficult situation ?
Up to now, we are very happy to see colors in MAX and
LV.
Yes, we notice that we use a beta driver and we could
not expect that it works perfect. But you wrote, that you have a running VISION BUILDER support with a XP machine and we are in a good mood to read this.
We appreciate your help in this manner and thanks again
Stephan

Just can't get Airport Express to configure: it worked at my mum's, but not at home!

Hello helpful people,
I am really hoping someone can think of what's going wrong with my set up. I keep getting an error message "an unexpected error occurred, please try again" when i try to do my configuration. I only want it to stream music from my ipad to my stereo. I would really prefer to do the set up only using an ipad, if at all possible.
I was given a shiny new Airport Express for Christmas. As i was staying at my mum's for two weeks, I plugged it into her stereo, and got it working. This was configured to join her existing wifi network, using only my iPad to set it up. The airport utility software was not used, as i didn't know it existed. All worked fine.
It looks as if my router is running WEP. So i gather i need airport utility to configure it. Airport utility says it can't detect a base station anywhere, even when inches away. There don't seem to be any options to get it to work differently.
I have reset and factory reset the device many times.
Some level of wireless access must be working on it, as it appears on my wireless list as a possible "set up airport express base station"
I go through the menus to set it up in the same way as at my mum's: selecting my existing wifi network to add it into, setting up a new base station password, and then watching and waiting.
Among the different resets and re-attempts i have done, it varies slightly in behaviour: the last time it failed it didn't get as far as asking for my wifi password.
After the error message i can't "try again" as suggested. It wipes out my wifi access, so i need to delete my existing wifi network (on the ipad) and re-add it to get an internet connection back again. I need to do a reset to get the "configure new base station" message back.
The differences between the two houses:
The stereo connection is different in the two houses: single 3.5mm jack into mum's; 3.5mm jack split into two needed for our stereo. I know it says you need to plug into the stereo first (and I have), but surely the device doesn't care which cable i use?
At my house, the wireless router and airport box are within 4m of each other. At my mother's it's more like 20m.
My wireless router is from O2 (now Sky), my mother's is plusnet.

It looks as if my router is running WEP.
Virtually no security at all there, as there are numerous free utilities available on the Internet that will crack a WEP network in seconds. You might as well run the network wide open, since WEP offers about the same level of protection.
You will not be able to configure the Express using an iPhone, iPad, or any version of AirPort Utility that is 6.x or higher with your router set to use WEP "security". They will not work with WEP, since it is so long out of date and non-secure.
An older version of AirPort Utility 5.x might allow you to configure the Express using WEP security, but with no protection anyway, this would be of little value.
See if your router can be configured to use WPA2 Personal security or WPA/WPA2 Personal security. If it can, then you will be able to use an iPhone, iPad, or any version of AirPort Utility to configure the Express in just a few minutes.
If your router cannot be configured to use stronger current WPA settings, now might be a very good time to ask your service provider for a new router.

How can i get a later version of i movie after 7.1.4 but not the latest one for yosemite.

i dont want to update to yosemite. i have version 10.8.5 snow lion and i like it. have read a lot about yosemite that i didnt want to mess with, such as i tunes 12, i already hated what they did to i tunes when we lost cover flow. even though i have updates through the mountain lion update my i movie is still version 7.1.4 and i wanted to know if there's any updates i could get up to mountain lion for i movie.

probably this should help: (Its a direct link to download)
iMovie 9.0.9
As the system requirements shows, it can run on OS X Lion v10.7.4 or later.
Actually you can even go to the 'Mac App Store' on your device, it should automatically show you the compatible version for the OS you are using.

Why can i see an album (punk o rama 10) on the apple website but not in the itunes store

the title pretty much sums it up, added note: when i go to press view in store it tells me to download itunes which i have.

The issue is that your credit or debit card credentials must be associated with the same country where you reside in order to purchase iTunes content.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching the billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations, although it’s worth nothing that features like iTunes in the CLoud and iTunes Match are designed to work best when using a single iTunes Store account, as you can only switch accounts with these services every 90 days."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

I have just got a iPod 5 gen 32gb and lightning adapter but can't get it to work with my docking station it will charge but not play audio please help??

I have bought a 5th gen iPod and lightning adapter but it won't wrk on my docking station it charges but doesn't play audio? Please help

Does the dock manufacture say it is compatible with the 5G iPod with iOS 6.0.1?
Have you went to the manufacturer's support site? Contacted them?
Try resetting the dock. How you do that depends upon the dock
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Can you get values back from a stored procedure via OUTPUT parameters?

Can you get values back from calling a stored procedure via OUTPUT parameters/variables? I call the SP via a SQL statement from a script either in a WF or DF.
I thought I read some reference that DI could not get the values from OUTPUT parameters but I could not find it again (don't know if it is in any of the documentation or referred to in a forum.
I did try a couple of tests but it did not reutrn any values via OUTPUT. But before I give up I thought I'd see if you could and maybe I needed to change something.

This isn't exactly an answer to your question, but I'll point out that, given that you're resorting to a SQL script in the first place, there's no reason you can't also turn the output parameters into a regular result or record set. (The following uses T-SQL, although I think it's pretty generic.)
declare @param1 int, param2 varchar(100), @return int;
exec @return = proc @param1 = @param1 output, @param2 = @param2 output;
select @param1 as param1, @param2 as param2;
That is, to get from output parameters to a "regular" output from the SQL script isn't much of a leap...
Jeff Prenevost
BI Consultant
Ann Arbor, MI

Why can I get 4k output from MSI Radeon HD 5450 on Win XP but not Win 7?

Similar Messages

Maybe you are looking for