Why can I invite guests on my iMac, but not on my iPad or iPhone?

Why can I invite guests on my iMac, but not on my iPad or iPhone?

That did cross my mind earlier today and when checking iCloud found that it had an old ID. I logged out and then in again on my current ID. It still doesn't sync.

Similar Messages

  • Why can you flip an image in Photoshop, but not Cmera RAW, or can you?  (CS5)

    Why can you flip an image in Photoshop, but not Cmera RAW, or can you?  (CS5)

    Doesn't look like you can. I'm just a user, so I don't know why. It can be done in Lightroom if that's any consolation.

  • I can airprint from my macbook and imac but not my iphone and ipad, whats wrong?

    I can airprint from my macbook and imac but not my iphone and ipad, whats wrong?
    I'm aware that all printers are not airprint enabled but since i can print form my imac that should not be a problem right?

    Hey Fredrik68,
    I would double check and see if you meet all the requirements for AirPrint here, including the printer model:
    AirPrint Basics
    http://support.apple.com/kb/HT4356
    Have a good one,
    Delgadoh

  • Why can I see other peoples' WiFi networks but not my own?

    This is a problem that started when an engineer came to replace our TV's set top box as well as our router a few weeks ago. I'll run through everything in quick bullet-point form...
    -My flatmates are able to see and connect to our network with no issues at all on their XP laptops.
    I, on the other hand, can not see or connect to our network at all. However, I am able to see other WiFi networks.
    -Days of rebooting and replugging the router, my iMac and AirPort card prove fruitless.
    -Throughout all this, the router is sat on top of the set top box, which is sat on top of the TV. I move the router down so its sat next to the TV and a plant. I'm able to see and connect to our network with no issues.
    -Three weeks later, the problem has returned. I can't see our network but my flatmates aren't affected.
    -Thinking it may just be poor reception in my room, I set up my Mac in the front room a couple of feet away from the router. I detect other networks, but still not my own.
    -More unplugging and rebooting later, hallelujah, I can see and connect to our network. I take the Mac back to my room and try from there. No luck. The familiar XBoxLive8973498374, BT-HomeHub8934897, TalkTalk439847 (etc) and Sofia networks come up in my networks list as usual but not our own SpeedTouch459873439847 (etc).
    We have a Thomson ST 585 router and I have an iMac G4 with the original AirPort card. Short of buying a new router, does anyone have any ideas as to why this is happening and how to fix it?

    This is what MacStumbler sees when my Mac is situated a couple of feet from the router in the front room:
    http://farm4.static.flickr.com/3051/2308676274_00f5eba51c.jpg?v=0
    Our network is the one labelled SpeedTouch. As you can see, my AirPort antenna seems to be working perfectly. However, the SpeedTouch connection (and only the Speedtouch connection) would be lost intermittently for several minutes at a time.
    This is what MacStumbler sees when my Mac is in my room:
    http://farm4.static.flickr.com/3184/2308733380_dcdc2faccd.jpg?v=0
    The SpeedTouch signal strength is obviously not as strong but still reasonable. I don't seem to have any issues anymore; I can see, connect and stay connected to our network with no real problem - but I haven't changed any settings on the router.

  • Suddenly, my 1st gen can't access iTunes store.  It sits on "Accessing iTunes Store", with a spinning wheel for days.  I can access the store from my iMac, but not the Apple TV.  Everything is up to date.  What's the deal?

    I can't figure out why my 1st gen appletv cannot access the itunes store.  All newer movies are coming up to view and I can watch previews, but when I go to rent, it stays on the spinning wheel with the Accessing iTunes Store forever.  I've left it going for at least 4 or 5 days.  I can rent from my iMac, but all I have is the headphone, analog, 2-channel audio feed and not the true digital surround.  It sounded much better from the appletv.  HELP!

    Read a bunch of posts from 2008 and 2010.  The only step I found that I hadn't tried was the ol' plug pull.  After that, I got the first movie I tried renting.  ???  At least it works now.

  • Why can you run windows on a mac, but not mac on windows

    I dont understant why you can run windows on a mac, but not mac on windows.  Any help.  I would purchase OS X Mountain Lion if you gave me a way.

    Microsoft builds software to run on other companies' hardware, pretty much exclusively if you don't count the long line of failed devices: Zune, Windows phone, and now the Surface.
    Apple builds hardware. They support that hardware with their own operating system. It is designed to run only on their very tightly integrated hardware. Trying to write software for the plethora of crap being sold would be a failing proposition and would divert resources away from the great software they provide for their hardware customers.
    The hardware and software are very well engineered to provide the best possible experience.
    If you want to experience a Mac, buy a Mac.

  • I can sign into itunes on my computer but not with my ipad or my iphone 4s

    I am able to sign into itunes on my computer but when tring to
    on my iphone 4s it keeps coming up with (incorrect apple id or password)
    same with my ipad mini

    Hello nick,
    Thanks for dropping by our Support Community!
    The following article would be a great place to start in your efforts to restore the iTunes Store's functionality to your computer.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • Why can i import an omf in pyramix but not in audition?

    i simply cannot import an omf file into audition cs6 (with the latest updates). i can open the same file in pyramix no problem...........what am i doing wrong.....or is it the software failing to deliver?
    the result is having to abandon audition (my preferred daw) in favour of an overcomplex but workable alternative. 

    Oh but they can and there is one - AES31 (an ADL for the uninitiated) a nice simple text readable standard which is only implemented (poorly) by a few DAWS.  Unfortunately, Avid/Dodgy told the world to jam AES31 up their ginger because they had the standard to beat all standards - OMF1.  A format that was so complex and delivered so little but that didn't matter - when the 'industry standard' (LOL) DAW talks everyone must obey.
    But hang on - it couldn't be such a good standard because they came out with OMF2 which was much better because it was even more complex but again that didn't matter because Avid products would use the undocumented areas of this complex format to pass info between only their products.
    Well the world struggled with this for a long time with DAWs doing the best to read and write this horrendously complex and dubious format and it was then the the powers that be decided that this was no good some other 'non-industry standard' daws were actually able to use some variants of the OMF format so they thought that because they run the show they could get together and come up with a format that was not only more complex but would actually deliver less and see if they could get away with it - you betcha and that was where AAF comes in.
    Bottom line is that there is no 'standard' allowed unless it's an Avid/Dodgy one and they really aren't interesed in one - remember everyone has to be 'PT compatible' (what a joke!)
    Does that give you an idea of how this game is played?

  • Why can I only change chapter and Audio, but not subtitles?

    I have a little problem, and I don't understand WHY it should be a problem.
    I have started ripped all my movies into a local computer for home sharring. We have some Apple TVs in the house and everything works well for ripping and watching movies.
    All our movies has been ripped in HandBrake and thereafter metatagged in MetaX. In Handbrake I choose the standard A TV 2, which languages I want and which subtitles I want.. The funny part is, that When I try to watch the movie in either iTunes or Apple TV, it is only possible for me to select chapter and Audio. I am sure I am not the first one to experience this, so if somebody could tell me if I do anything wrong? Or is it just iTunes and Apple TV that won't let you change more that 2 different data?
    i have tried to rip a movie without any chapters (a very short movie) and then it was possible for me to change the subtitles, but nothing else.. I donøt understand it and it is very confusing.. :/ Please help somebody.. Just tell me if it is my fault or it is Apple's fault..

    Sorry we cannot help you circumvent copy protection, such discussion is prohibited in these communities.

  • Internet slow on imac but not on wireless ipad... HELP!!

    Why?? Driving me crazy, sometimes it's fast sometimes pages never load or are painfully slow to load... hellllp!
    I've had the motherboard replaced because of ethernet loading issues a year ago or so, and it worked fine, then changed to cable internet and having loading problems agian, but this time I have the same problem whether I use ethernet or wireless.
    but the ipad is lighting fast...

    sometimes pages never load or are painfully slow to load..
    In Safari? Try here >  Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues

  • Why can I see photos in photo view, but now event view?

    Why can I see photos in photo view, but not in event view. The event shows up, but when I open the event, it says there are no photos in the event. The only way I can actually open a photo in the event is to be in photo view, and open the photo from that view.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • I can log into iTunes on my iMac but it won accept the ID and PW on the Apple TV, why?'t

    I'm new to this also.  I can log into iTunes on my imac but the same ID and PW will not allow me to get on through Apple TV.  Why?

    It's a straightforward port-forwarding issue.
    You need to forward ports to the internal ip address of your apple tv as follows:
    TCP 123
    TCP 3689
    UDP 5353
    TCP 80
    TCP 4343
    TCP 53
    This may also solve other problems you may have with homesharing...

  • Why can I sync iBooks on my iMac and iPad but not my Mac Book?

    Why can I sync iBooks on my iMac and iPad but not my Mac Book?

    That did cross my mind earlier today and when checking iCloud found that it had an old ID. I logged out and then in again on my current ID. It still doesn't sync.

  • Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

    Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

    Thanks for the interest. Preferences are similar on both machines: screen sharing, file sharing, printer sharing & scanner sharing all ticked and radio button for Screen Sharing is ON.
    My confusion is that I can get a network connection to the iMac by selecting "go to server" on the PowerMac running 10.5.8 but am unable to make the iMac connect to the PowerMac using similar selections. When ethernet cable is plugged in the PowerMac shows up on the finder bar on the iMac, but it does not allow either screen sharing or connection to occur - a dialog box tells me to check System Prefs and Network connection.
    I'm hoping to export a large file of photos from iPhoto on my iMac to my wife's PowerMac and hoped to achieve this with an ethernet network connection.

  • Why is my iPhoto library greyed out in the Screensaver folder selection dialog on one iMac but not my other?

    Why is my iPhoto library greyed out in the Screensaver folder selection dialog on one iMac but not my other?

    I have an update to my issue above, with a Semi-solution found. I brought my Macbook Air back to the Genus bar today and they were able to identify (using “Activity Monitor”) that when the particular iPhoto library was being launched through iPhoto both Photostream and iPhoto's CPU% usage was excessively high (between 100% - 200% each). She discovered that if we turn off Photostream in iCloud settings iPhoto then behaved fast and snappy and CPU% came back down to a healthier level. When we turned Photostream back on the problem continued. After an hour of trying to trouble shoot why Photostream was causing the issue they recommended I keep Photostream turned off until a future software update/fix comes out. The particular Genus I worked with was not familiar with this issue. I’m very happy to at least be able to use iPhoto again, but if anyone has ideas or theories on how the Photostream conflict can be fixed please share. Thanks.

Maybe you are looking for