Why can I no longer able to print out anymore than the first page of a multi-page document.

I am using Adobe Reader 11.0.04 on a Mac version 10.7.5.  Documents that used to print completely no longer do.  I would appreciate help in solving this problem.  Thank you.

Try if updating to 11.0.6 helps: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5717

Similar Messages

  • How do I print out more than the first page on longer emails.

    If an email is two or three pages long the Firefos print instruction only prints out the first page and lists it as 1 of 1

    On your iMac or on your iPhone?
    If on your Mac, which version of iPhoto do you have? The Print themes changed between the versions.

  • Why can I no longer import photos to iphoto library from the internet with a right click?

    Why can i no longer import photos from the internet to my iphoto library with just a right click?

    There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.

  • Why can I no longer use hdmi cable to connect to the tv

    WWhy can I no longer use hdmi cable to connect to the tv

    Anyway, with the introduction of ios 8.x, apple stopped supporting older a/v cables. You need to get the latest a/v cable with the correct firmware. There is a little chip in the a/v cable. go to the apple store. Buy a new cable. Verify the cable works in the store.
    some people report success with a full factory restore.
    Re-boot ipad.
    Press and hold the Sleep/Wake button until a red slider appears, then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.  page 128 iPad user manual.
    force power down if the above give you trouble.
    Hold down both the Sleep/Wake button and the Home button. Ten seconds or more.  Hold until the Apple logo appears.
    more details on re-booting:
        http://ipad.about.com/od/iPad_Guide/ss/How-To-Reboot-Your-iPad-Power-Off.htm
    Restore to factory settings by loading the latest version of ios that your machine will support:
       Do a full backup of your device.  Twice is best -- cloud and computer.
       "You can use iTunes to restore your iPhone, iPad, or iPod touch to factory settings and the latest version of iOS."
       http://support.apple.com/kb/HT1414?viewlocale=en_US&locale=en_US
       "You can put your iOS device into recovery mode, then restore it using iTunes.:
       http://support.apple.com/en-us/HT201263

  • Why can I no longer use my exterior speakers connected to the USB port on my MacBook pro

    QuestionWhy can I no longer use my exterior speakers connected to the USB port on my MacBook pro ?

    Have you checked the Sound Preferences under the System Preferences and set it to USB speaker for the sound output? Sometimes it can change on its own or after and update of an App or the OS?

  • TS1702 I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the documents using Adobe? I tried the open button, but I still can not get more than the first page. Thanks

    I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the PDFs? I tried using the open button at the top, but I'm only able to see the first page. Thanks

    I had the same problem.
    Try this.
    https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

  • When I print a pdf file, the first page is dramatically  reduced in size while remainder pages print correct size. How do I fix this pro blem?

    recently, when printing pdf files, the first page prints out as 1/10 or 1/20th original size while rest of document prints correctly.
    I have no idea how this happened or why and I have no idea how to fix. I cannot get the first page of any pdf doocument to
    print correctly and thus, I am virtually unable to print pdf files.

    Sometimes if a .pdf is smaller than actual 8 1/2 x 11 or bigger, you'll either get way too much of the image and it's cut off, or the image is too small. You should also try to do this in the print driver window: Properties -> Advanced -> Image Options -> Disable "PostScript pass-through"

  • In Pages, How can I get headers and footers to show up on more than the first page of each section?

    In Mountain Lion, I considered myself a fairly expert user of Pages. Since "upgrading" to Mavericks, I can't get even basic things to work anymore. My current problem is that the headers and footers are only showing up on the first page of each section. A related annoyance is that if I copy the information in a header or footer, all the associated formatting disappears when I paste it. But the first problem is the one that matters — headers and footers that only show up on one page sort of negate the whole point of headers and footers.

    If you click the link I posted previously, it takes you right to the Pages community.
    Here >  Pages: iWork: Apple Support Communities
    Then click New.

  • Selective Printing i.e. I have to print a field leaving the first page

    Hi All,
    I have a requirement to print a field on every page excluding the first page.
    If anybody has worked on that please help me out.
    Thanks in advance.
    Regards,
    Raman

    Try if updating to 11.0.6 helps: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5717

  • MG5350 prints only top of the first page (ink is full)

    It started a few prints ago that the printer MG 5350 is only printing the head of the first page the rest stays blank, on a document of 3 pages it also throughs out another completly blank page.
    All ink toner are full and I am printing via wifi. before this problem it was printing without any problems. 
    I am printing word 2013 documents.
    Any idea what I could do?

    This print quality document may offer further help:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02208875&tmp_task=solveCategory&cc=us&dlc=en&la...
    There is also a document about cleaning the printhead contacts:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01615896&cc=us&dlc=en&lc=en&product=4083969&tmp...
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • How can I print out a section of a pages document?

    I am helping my dad with his (massive) memoirs. He wants to send individual chapters to friends and erstwhile colleagues, by PDF and snail mail. The chapters are in individual sections. How can he share or print these - without having to specify page numbers? Much obliged for any help.

    Well you could chop up the document into individual documents or just Print from page x to y to PDF.
    Since your father's friends will most likely have PCs or simply not have Pages, that would be the best format anyway.
    Peter

  • Why is the print out darker than the colors on the screen?

    This is happening in both Photoshop and Illustrator.  My prints of my work come out darker and grayer than the bright colors on the monitor.  I am on a Mac OSX 10.6.8. 
    When I adjust the Color Settings from the Edit drop-down in both programs to "Monitor Color" that still doesn't help.  And a dialogue box tells me to fix the problem in Bridge.
    Can I fix this problem in Bridge or is this more smoke n' mirrors?
    Thanks!

    notverybright,
    You may have a quick look at Gamut here:
    http://en.wikipedia.org/wiki/Gamut
    Color management - Wikipedia, the free encyclopedia
    CMYK color model - Wikipedia, the free encyclopedia
    http://en.wikipedia.org/wiki/RGB_color_model#Physical_principles_for_the_choice_of_red.2C_ green.2C_and_blue

  • How many pages can be open in one single tab before I lose the first page of the tab?

    I use a tab for weather info on many places and I have lost the first few ones if I put too many places. Example: First page is Vancouver, last New York, and in the middle many places. How much pages is it safe to put in a single tab without losing ANY places from the beginning of the tab? EXTREMELY irritating to lose ones as I have to put all the places again (of course in fewer numbers)!
    PS.Mozilla: If I shut down Firefox and I'm in the end of the tab containing the previous weather pages, I only get around 10 or so places backwards and lose all others, this SHOULD CHANGE! I want to have at least 30 places backwards there when I come back! Weather is not the only thing where people want tab-pages to be saved and safely there for the next session. This has bothered me for a year, please change this!

    I'm not totally sure how many pages Firefox can remember. Its a lot though. If you want to view them, and count them if you want, click the back icon and hold it and a list will come up of recent web pages. I like your change idea though.
    Cheers
    Jon

  • I run Windows 7 and fter installing update, why can I no longer able to distill pdf formats?

    I run Windows 7 and use Acrobat as my default printer to store documents as pdf. After installing the update 3.6.13, I can no longer use my distiller as my default printer. How do I correct this. I have been forced to use IE.

    Hi, rseltz000.  
    Thank you for visiting Apple Support Communities.  
    Here is an article that you may find helpful when experiencing this issue.  
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Jason H.

  • Why can I no longer swipe with two fingers to go back a page in Google Chrome?

    This issue started after upgrading to Mavericks. In Chrome I used to be able to do a two-finger swipe from right to left to go back a page (in lieu of clicking the back button). I can no longer do this. Instead it sometimes locks my scroll, so my trackpad stops functioning in chrome entirely and I can only scroll with the arrow keys. This goes away upon restart, but I end up triggering it again inadvertently because I am so used to swiping to go back that I just end up locking it up all the time.
    This is extremely frustrating, so if anyone has a good explanation or a fix I would greatly appreciate it!

    The YouTube app is not included in iOS 6 (I think because the licensing agreement with google ended). You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google, and other people have said that they are working on an iPad version), or (if this isn't the version that you have tried) try accessing the mobile version via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

Maybe you are looking for

  • Not getting print out of PO

    Dear all,              I am not getting print out of PO. In the message out put, the config ( NACE , MN04 ) and as well as all setting are correct. in FURTHER DATA tab, the despatch option id 4 : Send immediately ( when saving the application) ; but

  • Role  in Business Partner

    Hi,      I am able to see role types like plant,,Purchasing unit in T.Code BUSD,these roles are assigned to particulare category,For example role plant we can see in Organization only but not in person,Where we do these setting. And please give me me

  • Can't get past setup assistant after installing leopard...

    i am having trouble getting past the setup assistant after installing leopard on my other computer which is a 1.25 ghz G4 desktop. Everything seems to be going fine then the setup assistant comes up and i go through the exercise of filling it out and

  • Apple Care put a scratch on my laptop!

    I just recieved my laptop back from apple on Wed/Thu (Stratford, London store) , i still have a my receipt etc and i just noticed they put a scratch ontop of my laptop! I am 100% sure that i never did that and before i gave it to them, it wasn't ther

  • I can't change my time zone

    Got the new update now the time zone is 3 hrs late and I can't change it to edt