Why can I no longer run YouTube clips on Firefox?

Not just YouTube. Other video too

You can check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows

Similar Messages

  • Why can I no longer capture DV clips?

    I can no longer capture DV clips that are useable. Is it a wrong setting or maybe bad hardware?
    I'm logging and capturing clips as DV anamorphic (downconverted by my deck from HDV), and when I play back the captured clip, the image in the viewer isn't moving (at least not very much; a series of freeze frames, really). When I expand the browser window, I notice that the data transfer rate for the clip is only around 300 k/sec, whereas previously capture DV clips weigh in at 3.6 MB/sec. I know 300 k/sec is around the rate for RT Offline clips - but there is no evidence that the offending clips are RT Offlined. I've spent ten hours in the program and in the manual, trying to figure out how to correct this.
    I also opened the captured clips in QuickTime, and then used "Movie Inspector" to determine that the clips as captured are bad; in other words, it's not just a playback problem. A healthy DV clip reads out at 30.31 mbits/sec; my bad clips are reading 2304 kbits/sec, or 2805 kbits/sec, etc. The FPS for the problem clips read 0.81, 1.20, etc., whereas the healthy DV clips read, of course, 29.97.
    Oh, here are some other peculiarities: it takes longer than usual to complete the capture -- 10 seconds or so past the end timecode reading. And it always gives me the warning that there was broken time code in the sequence. And, it appears that audio track 2 is out of sync -- a several seconds later than audio track 1.
    And recently, there's variation to the problem, where the first couple of seconds of the captured clip are a series of quick freeze frames; then, the rest of the clip is entirely black, with only the audio apparent.
    I'm beginning to think it may be a hardware issue. It's not the deck, or the firewire cable, or the firewire port. I've switch them all out with the same result. I've trashed FCPro preferences and then reset them, with no improvement. I even reformatted by drive, re-installed the OS, and installed a different version of FCPRO. Same results
    Any ideas?

    Sorry for any inconvenience; I'm new to the discussion process. And sorry for the delay in responding; I've been away and unable to follow through.
    I'm still having the same problem.
    I've tried two decks: Sony HDV HVR-M25U in downconvert mode; JVC BR-DV600U. Plus, I've tried my camera, Sony Z1U, also in downconvert mode.
    The only other devices on the firewire bus are firewire hard drives -- essential to the operation.
    I've tried Mac OSX 10.4.6 and Mac OSX 10.4.10. I've tried FCPRO versions 5 and 6.
    It did not stop working after any updates or change in software.
    I reset the capture to Easy Preset for DV with no success.
    I didn't trash the preferences; but I did erase the disc and completely re-install the software -- twice.
    My G5 does do one other strange thing. If I have the computer "sleep" mode activated, and the computer goes to sleep -- I can't wake it up for a couple of hours. I think that's a heat-related thing; this is the G5 that has 7 fans (or is it 9?). And I hear you can't start G5s if the sensors decide one of the processors is over-heated. If I shut off the computer, the same thing happens; I have to wait a couple of hours. My present workaround is that I just leave the computer on all day (deactivate the "sleep" option), and it seems to work fine -- unless this capture problem is somehow related.
    I'm going to try to capture DV footage using iMovie -- once I get my hands on a version that works with Tiger. This might indicate whether this problem is software-or-hardware based. I'll update this message thread once I've been able to do this test.
    Thanks for any further thoughts you might have!

  • Why can I no longer run Microsoft Office after downloading Mountain Lion?

    I recently made the jump from snow leopard to mountain lion the other day. After the installation of mountain lion was complete I noticed a number of my applications were no longer useable. The most noticeable ones were anything under microsoft office. I have been using the 2004 version of Microsoft Office  on this Mac without a single problem for four years until Mountain Lion was installed. Now when I try to open it a message pops up saying PowerPC applications are no longer supported. I was wondering if others were having the same problem or there was a solution to fix this.
    Thank you

    Welcome to Apple Communities
    PowerPC applications aren't supported in Mountain Lion. What does it mean? You have to update all your programs to an Intel edition. You can use Office 2008 or 2011, try iWork in the App Store or use LibreOffice

  • Why can you no longer see audio clip names in the timeline in CC?

    This is very frustrating, so I'm hoping there's a solution. I need to be able to read audio file names within the timeline...especially music clips. Why would they remove this feature? Is there a way to get it back? And while I'm at it, why do you now have to expand the timeline tracks to be able to read the the track names? (I label all of my track names, but obviously don't want them all expanded just to be able to read what I labeled each track...that would be one fluster cluck of a timeline since I have a minimum of 10 audio tracks at all times!)
    Thanks for any help on this issue! I just switched to CC v.8 yesterday and am trying to work out all the kinks.

    Hit the wrench in the timeline and check Show Audio Names.

  • Why can I no longer open images with Photoshop CS3, running on Mac OS 10.4.11?

    Why can I no longer open images with Photoshop CS3, running on Mac OS 10.4.11?

    You may be able to drag and drop the icons from one toolbar onto another, you can then hide the toolbar that you no longer need. For details on how to do that see https://support.mozilla.com/kb/How+to+customize+the+toolbar

  • Why can I no longer drag and drop in iMovie 11?

    Why can I no longer drag and drop in iMovie 11? This means I can't select transitions, titles, or even move clips within the project. Never had this problem before.

    Serious bugs in iM 11 with numerous lock-ups and crashes.  I shouldn't have upgraded -- now I'm pulling out my hair trying to complete a video project with it.
    Apple is losing their way.

  • Why can I no longer delete specific messages on my iphone5?  There now is only an option to Delete All i.e. the entire conversation.

    Why can I no longer delete specific messages on my iphone5?  There now is only an option to Delete All i.e. the entire conversation.  Can this be resolved.

    I don't know what to tell you if you really are running iOS 5 but on iOS 8 when you hold down a message you get the options Copy and More. When you click more you can select a specific message and click the trash can to delete just that message. Check and see if you have that as an option.

  • Why can I no longer install iTunes updates on my computer? I keep getting messages saying it fails, and to do it manually, but then I get popups questioning whether I have the authority to make these changes. And it never updates.

    Why can I no longer install iTunes updates on my computer? I keep getting messages saying it fails, and to do it manually, but then I get popups questioning whether I have the authority to make these changes. And it never updates.

    Make sure you are running as the Administrator of the Account.
    Also...  See this User Tip by turingtest2
    Troubleshooting issues with iTunes for Windows updates

  • Why can I no longer use my headphones remote to fast forward or rewind music videos on iPhone since upgrading to ios7?

    Why can I no longer use my headphones remote to fast forward or rewind music videos on iPhone since upgrading to ios7?

    The YouTube app is not included in iOS 6 (I think because the licensing agreement with google ended). You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google, and other people have said that they are working on an iPad version), or (if this isn't the version that you have tried) try accessing the mobile version via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

  • Why can I no longer import photos to iphoto library from the internet with a right click?

    Why can i no longer import photos from the internet to my iphoto library with just a right click?

    There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.

  • Since the last update of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you check why it taking so long since the update on firefox.

    since the last update a few days ago of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you tell me why it taking so long since the update on firefox. may another update is in order.

    I have now done pretty much every suggestion that even vaguely applies in the various helpful link provided. Thanks for the ongoing help. =)
    I have managed to get FireFox's start-up memory usage down to about 100,000K, however it appears that memory usage keeps creeping up the longer FireFox is open. (It seems to top out around 500,000K.) And I'm not talking open for many hours or days - but rather for minutes and possibly up to a couple hours. (Based on how long I've been fiddling with all this so far.)
    On the plus side, it does not appear GreaseMonkey is the culprit since with it active or disabled this memory creep still occurs. Although having GreaseMonkey enabled definitely increases the rate of memory creep. Though once it has creeped up to 150,000+K, disabling GM does not make it drop back down to the starting 100,000K.
    I should point out I run a MacBook Pro and use Bootcamp to partition the hard drive and run it as a Windows 7 PC about half the time. I am running it literally as a PC or, alternately, as a Mac depending on which hard drive I choose to load. (I'm not "windowing" it.) This problem exists regardless of whether I am using the PC or the Mac. These repairs have been made currently on the PC side, and I will attempt them all again on the Mac side. I find it odd that this enormous memory drain has occurred on 3 different computers at the same time. (The two "halves" of my home laptop as well as the PC at my work place.)

  • Why can I no longer import EDITED photo from my iPad to my Mac using Image Capture from Snapseed app?

    Why can I no longer import EDITED photo from my iPad to my Mac using Image Capture? This is farcical and a real problem having to email them individually to myself and is totally inefficient time wise compared to previously using image capture! Why change this when it was working well and very quickly until the latest change. Now I have to move files from downloads into an appropriate folder, after emailing each individual edited image to myself, then I have to open in Photoshop and rename the file. This is ludicrous and takes forever to do!

    Thank you! I suppected it would be in the settings somewhere. I' ve much to learn...get myself into trouble pushing buttons I don't really understand.

  • Why can I no longer access google from my mac with either Firefox or Safari

    why can I no longer access google from my mac with either Firefox or Safari — both with latest updates loaded. My PC is fine.

    What was before? And what is now?
    It is a good idea to include the machine type and OS version in your problem posts.

  • Why can I no longer open or save documents in word?

    Why can I no longer open or save files using office for mac?

    Go to the Apple Menu (top left) click the Apple Menu and select "About This Mac"
    That will result in this window:
    The version number is right underneath Mac OSX.
    Then I will need to know which version of Office (Word) which you will see on the splash screen when you start it.

  • Why can I no longer add photos my iPhoto book? Is there a limit to the number of photos? Must I delete unused photos??

    Why can I no longer add photos my iPhoto book? Is there a limit to the number of photos? Must I delete unused photos?

    This is book # 13 and I've not encountered this problem before. I am dragging photos into the sourse pane but they are not imported. I have other books w/ over 700  pics (not all used) but this has only 300+ so far. I've copied the book to a pdf and it looks as if I'll have to redo it unless there's another solution.

Maybe you are looking for

  • Problem installation SAPNW2004sABAPTrial on O.S. VISTA

    Hi all,        I tried to install SAPNW2004sABAPTrial  on my mobile PC in which Operating System VISTA is installed. When I tried to modify the file "hosts" in order to add the new loopaback, VISTA stopped me because I don't have the autorization als

  • Connections in use in data-source

    Is there a way to find out how many connections are in use in the pool for a particular data source? I've gone through the Visualizer and JMX. I can find the configuration, but no MBEANS or metrics for how many connections are actually in use?

  • Restarted my MacBook Air, just have a white screen with apple . Will not start up

    Restarted my MacBook Air, just have a white screen with apple . Will not start

  • Configurator 4 and Photoshop CC 2014

    I am new to Configurator. I followed a tutorial, based on CS 5 or 6, on how to create a custom panel. I followed the directions for downloading and installing Adobe Air first and then Configurator 4. I created a panel and Exported it, placing it in t

  • Installation of OWB Repository on RAC fails at 77%

    All, We are trying to install OWB (Version 10.2.0.3.33 on AIX) Repository on RAC and installation fails on 77% completion - installation is performed on the AIX server. this is where it fails jvm.sh -classpath ../../lib/int/rtpplatform.jar:../../lib/