Why can I not add a system in Raid Admin, my raid is not being recognized

I was able to see it a few days ago but now it will not connect, I need to check one of my drives which I am pretty sure needs to be replaced. amber light is on and when I checked it the other day it showed a degraded array and drive 2 was not being recognized. could the cables from the xserve to the raid be bad?
thanks

The XServe RAID uses the ethernet connection for all administration. Make sure the ethernet links are active and that you're in the same subnet (or at least somewhere the XServe RAID can route to).
Did you manually configure the network ports or leave them as DHCP?
If DHCP it's possible that the controller's IP address has changed, in which case you'll need to be on the same local subnet to locate the RAID.

Similar Messages

  • Why can't I add narration now ?

    I have added narration in the past on previous versions of Premiere elements and on Pre 10 but in the last 2 weeks I get an error when I click on the red record button I get a error message that my audio hardware selection does not have any input channels and I should go to Preferences, Audio Hardware to correct this.
    I go to Preferences Audio hardware and and it shows Premiere elements WDM Sound and next box has ASIO setting. I click on these and I see no other possibilities or choices.
    I still have Pre 8  loaded and the narration will not work now on it with the same error.
    What could cause this after narration has always worked in the past?

    Bill I believe I have answered your questions If not get
    back to me and I will try. I am a Snowbird in a motorhome traveling in AZ. And
    the internet comes and goes from time to time. And being a senior my computer
    skills leave me at a disadvantage. I really appreciate you trying to help me.
    Thank You
    Ralph
    Computer Lenova Ideapad Y-530 Windows 7 64 bit
    Processors: Intel ® Core 2 DUO CPU T5900@ 2.20 GHz
    Intel® Core 2 DUO CPU T5900@ 2.20 GHz
    Chip set Mobile Intel 4 series chipset Processor To Dram
    controller 2A40
    All drivers have been updated and rechecked for updates
    today all were current.
    When in project and I click (Edit, Preferences, Audio
    Hardware) The box opens with Default device shown as Premiere Elements WDM
    sound. Then when I click ASIO settings a new window opens showing Logitech H
    150 as default device.( Left Panel 3.5 MM External Jack)  I also use this in Skype for phone calls and
    also tried it in Windows Movie Maker and it works OK.
    In the ASIO box there is 3 other choices:
    Speakers (High definition Audio Device)
    Digital Audio (S/PDIF) (High definition Audio Device)
    Laptop internal (High definition Audio Device)
    I Have tried all 4 devices with the same results
    When in project and clicking on Audio, Add narration, the (Record
    voice narration) window pops up and when I clink the microphone box to choose
    mic the box lights up but no choices show.
    In Control Panel, device mgr I do not see the Logitech  h 150 listed
    Narration was working till about 2 weeks ago. I do not
    believe I have changed anything.
    A bout 3 days ago I uninstalled Premiere el 10 and Photoshop El 10 and reinstalled both, I thought that may help but no change
    Date: Fri, 10 Feb 2012 10:37:01 -0700
    From: [email protected]
    To: [email protected]
    Subject: Why can't I add narration now ?
        Re: Why can't I add narration now ?
        created by Bill Hunt in Premiere Elements - View the full discussion
    Welcome to the forum. What is the make/model of your mic.? What is the connection type? What is the make/model of your sound card/chip? Do you have the latest driver for that sound card/chip installed? In a program, like Windows Recorder, does the mic. work fine? In Control Panel>System>Hardware>Device Manager, does your mic. show up with no errors, or warnings? What is the ASIO setting now? Good luck, and please let us know a bit more. Hunt
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4198766#4198766
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4198766#4198766. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Why can't I add text in the signature panel in firefox?

    why can't I add text in the signature panel in firefox?  I have adobe acrobat pro XI.  I can open a pdf in acrobat pro and am able to add text to a pdf, but when I open a pdf in firefox, the "add text" option is not available.

    When you install Acrobat XI you are also installing Reader for use in the browser. Reader is "sandboxed", or as it says in the Preferences, it is in "Protected Mode". Acrobat does not understand the concept of running in sandboxed memory (sandbox is a security feature to prevent the bad guy from exploiting a memory error and getting into a memory address where they can do damage to your computer) so to help protect Acrobat users the same way Reader users are protected we just install Reader along with Acrobat, but it is only used in the browser (part of this is because the bad guys use web sites as their primary method of distributing corrupted PDF files that can cause problems).
    That said, because you are in Reader the file needs to be Reader Enabled prior to being posted to the web site (or opened in the browser). Once the file is Reader Enabled you should be able to add the text annotations.
    Steve

  • Why can't I add HD videos to my iPod touch?

    So I recently bought an iPod touch, and I haven't had trouble with it until now. I downloaded a free TV show extra thing and it's in HD & SD, and it downloaded fine and everything. But when I tried to add it to my iPod, a popup comes up with the message: "Blah blah blah" was not copied to the iPod "Michaela's iPod" because it cannot be played on this iPod.
    Why? I tried to do the "Advanced Settings" and convert it, but the convert option is grayed out and I can't choose it. I thought the iPod touch could play HD (and I do have another HD video on it currently), so why can't I add this new HD/SD video to my iPod? And I know there's enough space because I have 24.6 GB free space.

    It's the screen format see below.
    The iPad and iPhone 4 can play High Definition (HD) content and Standard Definition (SD) content. iPods and the original iPhone, iPhone 3G, and iPhone 3GS can play Standard Definition (SD) content. To find what video formats are supported, see the Tech Specs page, click your device's product family, and then your specific model. All HD purchases from the iTunes Store also include an iPod/iPhone-compatible Standard Definition version to accompany the HD version. When syncing an HD purchase from the iTunes Store, iTunes will automatically sync the SD video for devices that require SD content.

  • HT201087 Why can't I add a location to a photo in the new Photos app?  Apple appears to have taken away a feature without asking.

    Why can't I add a location to a photo in the new Photos app?  Apple appears to have taken away a feature without asking. 

    I have an iPhone and occasionally use it for photos, but my main camera is NOT an iPhone.  To be forced to go outside Apple for a product when Apple had perfectly good products available is ludicrous.  But it is what it is, apparently.

  • Why can't I add playlist on my old iPhone iTunes on my computer? Can add it on my phone manually but I need to do it on the computer..

    Why can't I add playlist on my old iPhone iTunes on my computer? Can add it on my phone manually but I need to do it on the computer.
    This is an old iPhone that I am only using as an Ipod. It is an Iphone 3GS and I now have an iPhone 4S.
    Any help would be much appreciated!

    I assume that you mean that you do have an iPhone because messages will not work with any other type of cell phone. You should be able to add your phone number in Settings>Messages>Send & Receive at>You can be reached by iMessages at, if your phone number is lited in there, select it and then uncheck your email address and then the iPad will be using the phone number just like the iPhone.
    If you phone number is not listed in there, you probably have to sign out/turn off Messages on the phone and the iPad and then start over again on the phone - and then your phone number should be accessible to use on the iPad.
    Read this support article and pay attention to the information at the very end.
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538

  • Why can't Adobe add the feature of viewing focus points? This is an obvious,  common sense feature that Adobe Engineers must understrand how to do, No?

    Why can't Adobe add the feature of viewing focus points? This is an obvious,  common sense feature that Adobe Engineers must understrand how to do, No?
    I've seen this requested in several past Lightroom versions.
    Is Adobe not addressing this basic feature for a reason?, I mean, even Aperture has this feature, it can't be that hard to add? Can it?
    Maybe Adobe isn't reading the feature request?

    Honestly, I am hardly qualified to even guess - there are tons of bugs reported that would be easy to fix, but aren't, features that would be useful and easy enough to implement, but aren't. Things like focus points which seem like a no brainer but are never implemented - your guess is as good as mine..
    But to be clear: focus points are different for different cameras, and are stored in proprietary metadata. - not impossible to get at, obviously, but requires some programming/maintenance..
    Worth noting: Apple is shutting down their Aperture business. Yeah, they support focus points and all kinds of good stuff, but I guess Aperture isn't a real money-maker for them (lotsa maintenance work, but not a lot of revenue) - relatively small market.
    Adobe has been working on Revel, and Lightroom Mobile.., instead of focus points (and bug fixes, and...) - my guess: that's where the money is, or where they think it is.
    Cheers,
    Rob

  • HT201386 Why can't I add a title to a photo anymore?

    Why can't I add a title to a photo anymore in Iphoto editing?
    Thanks,
    Lpkaufman

    For a transition to work, you need handles... basically, enough footage to overlap each other so that the transition can grab from both sides... your clip is merely 7 frames, way too short to be able to add a transition...
    I've used the "joining two pieces of fabric" analogy before, but I think it was too girly.. Perhaps another way to think about it, is to think of a "dovetail joint" used in wood working... the two pieces of wood need to grab onto each other in order to hold together...
    Anyhow, doing a quick search to perhaps better explain, I found this:
    http://multimedia.journalism.berkeley.edu/tutorials/finalcut/transitions-handles /

  • Why can't I add any more photos to my nearly completed movie?

    Why can't I add any more photos to my nearly completed movie?

    Assuming you are using iMovie, please post your question in the following section...
    https://discussions.apple.com/community/ilife/imovie

  • Why can't I add or edit an entry on myiPhone Cal?

    Why Can't I add ,or edit an entry on my iPhone Cal?

    Wienderful,
    Make sure your email address on the iPhone and the Exchange server are the same. This article explains more:
    http://support.apple.com/kb/TS1865
    Hope this helps,
    Nathan C.

  • Why can I only add one app in passbook?

    Why can I only add one app (Starbucks) in Passbook? 

    You can add many passes to Passbook, what makes you think you can only add one?
    Check out http://support.apple.com/kb/HT5483.

  • Why can I charge me iphone with my car's usb port but not my ipad?

    Why can I charge my Iphone in my car using USB connection but not my Ipad?

    Because the iPad requires a lot more power to charge than your iPhone, and typically car and computer USB ports simply don't proivide that much.
    Its the same reason your iPhone comes with a 5Watt charger (and even then the iPhone only uses part of that) while the iPads come with the 10 or 12 watt charger.
    They just need more power.

  • Why can't I sent picture texts on the 4s? I had not issues sending them on the iphone 4... Help.

    Why can't I sent picture texts on the 4s? I had not issues sending them on the iphone 4... Help.

    MMS/SMS service is provided by your carrier.  Contact them for more information.

  • Why can't I add keywords in Lightroom 5.7 at Photo/Add Keywords?

    Why can't I add keywords in Lightroom 5.7 at Photo/Add Keywords?

    You need to be much more verbose about "can't".
    Any error messages?
    Make sure the right pane of tabs is visible. The menu command is just a jumper into the "keywording" tab.

  • Why can't I delete mp3 files from my Trash?  They are not locked.

    Why can't I delete mp3 files from my Trash? They are not locked.  I compressed them into a zip file and then couldn't delete that file either.  I've restored them and tried deleting again but no luck.  Can anybody please help?  iOS 10.8.5

    You can't empty the Trash or move a file to the Trash
    Visit The XLab FAQs and read the FAQ on solving Trash issues. You can also try using Trash It! 5.1 to fix the problem. Or you can try this:
    Open the Terminal in the Utilities folder and paste the following at the prompt:
         sudo rm -Rf ~/.Trash/*
    Press RETURN. Enter your admin password when prompted. It will not echo to the screen. Press RETURN again.

  • Why can't I add bookmarks to Firefox 3.6.6? Nothing happens when I click "Bookmark This Page".

    Why can't I add bookmarks to Firefox 3.6.6? Nothing happens when I click "Bookmark This Page".

    Just for the record, I was having this problem with older versons of Firefox also. It just happened recently and, with the help of this forum (thanks cor-el) suggesting to open Firefox in safe mode and checking add ons, I found the problem. It was the recent update of Mcafee Site Advisor. If you have Mcafee Site Advisor as an add on, disable it and see if that helps. It worked for me.
    To disable this add on,
    Go to:
    Tools/Add ons/Extensions and click: "disable" for this add on and restart Firefox. Hope it works for you too.
    P.S. To uninstall Site Advisor altogether, you must do that through Windows Add/Remove Programs.

Maybe you are looking for