Why can I not find System Connections Option in NWA?
Hi, Gurus,
I'm trying to create provider-system for Web service on NetWeaver Application Server.
But I cannot find the option: System Connections under the path: NWA --> SOA Management --> Technical Configuration.
Could anyone tell me why?
Thanks a lot!
Regards
Rene
Edited by: Rene Dong on Aug 9, 2011 11:28 AM
Thank you so for your points!
I test with SAP_NWA_FULL role in my Sap PI system, and it works.
Try to log out and repeat login with your user.
With this role, should be also the follows roles:
SAP_NWA_FULL
SAP_BC_BASIS_ADMIN
SAP_BC_BASIS_MONITORING
SAP_BC_CSMREG
SAP_BC_DB_ADMIN_DB2
SAP_BC_DB_ADMIN_DB4
SAP_BC_DB_ADMIN_DB6
SAP_BC_DB_ADMIN_MSS
SAP_BC_DB_ADMIN_ORA
SAP_BC_DB_ADMIN_SDB
SAP_BC_LVC_ADMINISTRATOR
SAP_BC_TREX_ADMIN
SAP_BC_WEBSERVICE_ADMIN
SAP_XI_DISPLAY_USER_ABAP
SAP_XI_MONITOR_ABAP
SAP_XI_RWB_SERV_USER
Try also with NWA_SUPERADMIN role, if you have it:
http://help.sap.com/saphelp_nwpi711/helpdata/en/46/9d97c33a7d371ae10000000a11466f/frameset.htm
Similar Messages
-
Why can I not find "command line options" in FF help?
I can't find any information in the knowledge base on windows command line options for Firefox. I actually had to go to "http://kb.mozillazine.org/Command_line_arguments" to find this information. This seems like a fairly common piece of information FF users would want to know. At least, it's not extraordinarily rare.
You have out-of-date plugins with known security issues. You should update them.
* Adobe Shockwave for Director Netscape plug-in, version 10.3
* Next Generation Java Plug-in 1.6.0_21 for Mozilla browsers (new security update releases 10-12-2010)
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions: http://www.java.com/en/download/faq/remove_olderversions.xml
#* After the installation, start Firefox and check your version again. -
In Dreamweaver CC why can i not get any workspace options? Where do I find 'Draw AP div' or any of my 'designer' tools?
Insertion of APDivs/Layers are deprecated in CC. Historically, APDivs caused many, many problems for people who didn't understand they were not intended to be used as a primary layout tool. Look at FluidGrid Layouts.
http://blogs.adobe.com/dreamweaver/
Nancy O. -
Why can I not find a miniport to external monitor cable that works? I have bought for different types, two from Apple, cost me $300+ and still have no external monitor. Help, please.
What have you bought?
What model Mac are you running?
What input sources are available on the display you are connecting it to? -
I have upgrade ios 6 to ios7 on my iphone 5. I do NOT like it at all. I want to come back to the previous version. why is it so complicated? Why can I not find the instruction strait from apple? This is the worst possible upgrade ever. It make me think of when ericsson got sold to Sony....drastic PC change.
I would like to have simple instruction on how to downgrade.
It feel like a change that I did not ask for , ok I push the upgrade buttom, but really this is the worst update aver!
HELP!iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB
-
Why can't i find a 5x7 option to make prints? it only shows me wallet size options.
why can't i find a 5x7 option to make prints? it only shows me wallet size options.
why can't i find a 5x7 option to make prints? it only shows me wallet size options.
-
When I rename a photo why can I not find it doing a search? The photo obviously keeps its old name even though it has a new one> IPhoto 09
Thanks, that makes sense. If I do a search in IPhoto I find it. I have 6 grand children and also have had my camera for quite awhile and it starts file names over again after 10,000 pictures. (I don't have all these on the computer) but now I have some files with the same name ie img_4 and img_4
Thanks again for your help!!
HC -
Lens Data- Why Can I Not Find It?
I use a Mac and ran the trial version of Aperture and liked it but it did not run very smoothly so I have purchased LR3. The features and utilities are about the same with one exception, Aperture automatically gives you lens name along with all the other EXIF photo data (aperture, zoom, etc...). Lightroom gives me aperture, zoom, ISO and shutter, just like Aperture but will not tell me the lens make and model. Am I missing something? I looked at that lens profiler program but didnt understand why I need it (and looking at the instructions with a checkerboard and other extra steps seemed unnecessary). If the camera records the lens along with the other pertinent information automatically (it must as Aperture picked it right up), why can I not find it?
I use a Pentax *ist DS and have a few different lenses. Some are older manual focus and a few are auto focus ones. The camera body reads the autofocus ones and whenever the photos were loaded up into Aperture, it gave the usual EXIF shot data as well as which lens was being used (whenever the autofocus ones were attached). Im hoping that LR3 can do the same thing without having to load up a separate plug in program in order to do it. I figured if the camera does it and Aperture picks it up, LR3 should too, right?
-
Why can I not find my hardware of RT system in MAX?
My test sytem include RT system based on PXI bus and Windows system installed in industrial PC.They are connected by LAN.
After I install the RT system and drivers, I can find all hardware of RT system through Remote system in MAX. But if I replace my hardware or controller in RT system.Always I can not find my hardware in MAX. So I must refresh in MAX continuously until I can find.s_yy,
Is the problem that you cannot find the hardware in MAX at all or that it requires refreshing for it to appear?
When you change/replace the hardware in your RT PXI system, you have to refresh the view in MAX in order for it to detect the changes - this will not occur automatically. You can refresh all items in MAX (View > Refresh) or you can refresh each item individually when it is selected. Keep in mind it may take some time for the hardware to initialize before you can detect it in MAX.
Misha -
Why can I not find appstore on my ipod?
If I search it in the search bar, it won't appear. And I can not find it on my home screen!
Check: Settings - General - Restrictions - Installing Apps = ???
-
I have bought several music from iTunes and now I cannot find them in my library. The same goes for music that I have ripped from my cds. What gives?! Why doesn't the music stay in the iTunes library like it does in Windows Media. There is music that I cannot get again and this is not acceptable.
Your iPod can only be synced with one iTunes library at a time. If you try connecting the iPod to a new iTunes library or PC, you won't be able to add any new content to it until you choose the Erase and Sync option that you are prompted with when you plug it in or restore the iPod if that option doesn't appear.
If you have content on your iPod that needs to be copied back over to your iPod, see this older post from another forum member Zevoneer covering the different ways to you can recover these contents and moved them back over to your iTunes library.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
I have purchased a new video card to add to my computer which has integrated graphics. When I installed the card I got a blank screen so I removed the card and restarted the computer and entered BIOS in an attempt to change it from integrated to PCIE the problem is I cannot find the option to make the change. I can select advanced chipset but there is no primary video option to select and as far as I can tell there is no option to switch it from integrated to PCIE.... I researched this heavily and am now resorting to this as I cannot find a way to get the video card to work. I have posted the options I have in my system's Bios below. Thnks for looking BIOS Version 2.14.1219Options:Main Advanced Power Security Boot Options Exit Main:System infoDateTimeAdvancedMiscellaneous AHCI Post 1 Not Present AHCI Post 2 Not Present AHCI Post 3 Not Present AHCI Post 4 HL-DT-ST- DVDRAM GH7ON AHCI Post 5 Not PresentAdvanced Chipset Configuration Intel EIST [Enabled] Intel Turbo Boost [Enabled] Intel AES-NI [Disabled] Intel XD BIT [Enabled] DVMT Mode [DVMT] DVMT Memory Size [256mb]Integrated Peripherals Onboard SATA Controller [Enabled] Onboard USB Controller [AHCI] Legacy USB Support [Enabled] USB Storage Emulation [Auto] Onboard Audio Controller [Enabled] Onboard LAN Controller [Enabled] Onboard LAN Option ROM [Disabled]PC Health Status {Health Status info}Smart Fan [Enabled]PowerACPI Suspend Mode [3(STR)]Deep Power Off ModePower On By RTC AlarmPower on by PCIE AlarmPower on by Onboard LANWake up by PS2 Keyboard/MouseWake up by USB Keyboard/MouseRestore on AC Power LossSecuritySupervisor passwordUsername PasswordChange Supervisor PasswordBoot Options1st Boot Device2nd Boot Device3rd Boot Device4th Boot Device5th Boot DeviceEFI Device PriorityHard Disk Drive PriorityOptical Disk Drive PriorityRemovable Device PriorityNetwork Device PriorityQuiet Boot OnHalt OnExit
iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB
-
Why can i not find my own private credentials
hello,
I have written an authenticator using the JAAS framework as described in the manuals
for developing a security provider.
Basically the user types in a username and a password.
I come into the login module,
store the username into a WLSUserImpl principal,then add the principal to the
subject.
Then i create a javax.resource.spi.PasswordCredential with a username and a password
and pass this to the privateCredentialSet of the Subject.
So far so good.
Next , some time later , i access an ejb, which needs the service of a connector.
Before i come into the connector , weblogic passes via my own credential mapper
also written according to manual for developing security providers.
Essentially i don't need the credential mapping , since i know this password already
when i did the authentication(the password for authentication is the same as the
password
needed for the JCA connector).
I come into the credential mapper and weblogic gives me a requestor and an initiator
subject
but none of them carry my private credentials which i stored into the subject
when i was in
the authentication module.
In the credentialmapper i am supposed to create a PasswordCredential.
For the sake of testing i create phony PasswordCredential with a phony user and
phony password.
Finallly i come into the connector
which has a method createmanagedConnection and which passes a subject and a requestinfo
and a managedconnection factory.
The suject that i receive is a resource principal with a private credential carrying
the phony user
and password.
Of couse i need the user and password entered during authentication,
how do get them???
Also i noticed when i configured my credential mapper,
that weblogic calls the getCredentials method twice in succession,
I don't understand why two calls is neccessary
Many thanks
Gino Blyau
IT Consultant
European Commission DG19
[email protected]
Here i receive a reource principal
s_yy,
Is the problem that you cannot find the hardware in MAX at all or that it requires refreshing for it to appear?
When you change/replace the hardware in your RT PXI system, you have to refresh the view in MAX in order for it to detect the changes - this will not occur automatically. You can refresh all items in MAX (View > Refresh) or you can refresh each item individually when it is selected. Keep in mind it may take some time for the hardware to initialize before you can detect it in MAX.
Misha -
Why can i not find the ringtones tap
Need a little help please. I have downloaded some new ringtones from the apple store on my iphone but when i go to transfer them into the ringtones tab i can not seem to find it anywhere. I have looked in the "edit"/"preferences but there is no option for ringtones only tones. Any help appreciated
Tones is the new name for Ringtones. If the entry is missing in the left-hand column of iTunes then enable it from Edit > Preferences > General tab.
If your existing tones are not syncing properly to your iOS device then uncheck the option to Sync Tones from the Tones tab when the device is connected, sync the device, check the option and sync again.
tt2 -
Why can I not find the Rubber Stamp icon in Fireworks 8
Using Fireworks 8:
ok - fairly new to all this - but I am trying to clone pixels and am looking for the rubber stamp icon. My "Bitmap" menu has marquee, lasso, magic wand, brush, pencil, eraser, burn & red eye icons on it, and under "Assets" (under Image Editing tab) in the other toolbar I have red eye, crop, scale, blur, sharpen, dodge and burn icons. No rubber stamp icon to be found. I am trying to edit a .jpg file (photo). I have read that it only works on bitmap files so I have saved it as a .bmp but still no luck finding the rubber stamp icon. Where am I going wrong please?!
Many thanksPanic not... it has only taken me all afternoon but there must have been a error as I have just reloaded the app and holding the mouse button down now produces a menu of options on the bitmap menu, so the user can toggles from one to the other.
Maybe you are looking for
-
Can we have more than one attachement to the "Email with Attachment" activity
Guys, I have a requirement in which the process has n number of approvers in the flow, and each approver can add attachments to the form in the list<document> variable which carries the attahced documents. At the end of the process i am supposed t
-
External speakers not working with iMac and Lion
I have a dual core imac with Lion and external speakers I just bought from Apple. I cannot get them to work with itunes or anything else on the imac. Can anyone tell me what to do? They work well with an ipod touch, but not the iMac.
-
Hello, I want to use the user tables default forms (after adding the user table in Uer Tables menu, it's generated a form to view that table: add, delete, update info). I'd like to lauch this form from my add-on menu. I know how to do that, but I won
-
What's the deal with flash memo
Hi, two questions: ) would it be dumb to buy a player without flash memory these days, and why? 2) what's the essential difference between the Zen Nano Plus and, say, MuVo V200? thanx, emma
-
Interface development using bloard03 and cond_a01
Hi, I want to create an inbound idoc for purchasing contarcts has conditions at header level and line item level . So I need to use bloard03 and cond_a01 in combination . please suggest how do we relate the two message type and guide me how to devel