Why can i receive emails on my iphone, but I can't reply to them

I can receive emails, but when I go to reply to them I get an error The smtp service smtp.eastlink.ca is not responding. check yur network connection and that you entered the correct info in the outgoing mail service field. Everything looks fine to me. My phone is through BEll and my internet is through Eastlink. No matter what I do I can't get it to work. I am so fed up right now. I checked with Bell and they had no idea. I am still waiting for a reply from Eastlink.

would say your smpt settings are incorret or if it's over 3g your isp are blocking the ports that smtp use

Similar Messages

I can't receive email in Mac Mail but I can send them

I use two email programmes on my Mac Mini - Thunderbird and Mac Mail. I can receive and send emails on Thudnerbird and I can send emails on Mac Mail but I can't receive the. Next to the mailbox is a squiggly line like a wave which I presume is the promblem but I don't know what that problem is.
I don't have this problem on my MacBook Air.
The Mac Mini is using Mac OS X Lion 10.7.5.
Thanks
roger

If an option exists on networksolutions to allow you to log in to your email via your web browser then access your mail via webmail then try deleting the offending message that way.
Chris

TS2621 I cannot receive email on my iPad but I can send emails. The incoming address is correct as it is working on my iPhone! I keep getting a pop up to verify my incoming address. It is correct and I have tried deleting it and putting it in again. Any i

I cannot receive emails on my ipad but I can send them. When I try to fetch emails a pop up box tells me to says verify your incoming email setting in settings. I have, it is correct as I am receiving emails on my iPhone with the same incoming address. I have tried deleting it and putting it in again but that does work. The wifi is working fine when using the Internet. Has anyone any ideas what is happening and how I can rectify the problem?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try a Reset - iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
Or this - Delete the account in Mail and then set it up again.
 Cheers, Tom

TS4002 Can't receive email on my MacBook Pro, I can get email on my iPhone, and my email on iCloud is very slow.

I can't receive email on my MacBook Pro, I can receive my email on my iPhone, and my email loads slow on iCloud.

The Pasty 52 wrote:
Thanks for the advise coolio88. Do you know if re-adding the account means all my messages get deleted?
Live mail is a POP system, everything will be deleted, so backup first.

Why mail can't receive email from gmail today, but yesterday was fine and yahoo is fine.

why mail can't receive email from gmail today, but yesterday was fine and yahoo is fine.

It's a risk if you're using POP3 mail. You can archive mailboxes to another location for safe keeping.
Or, just try adding new versions of the accounts without deleting the old ones (you can have duplicates, name them different so that you can tell them apart). If the new ones work, then you can just drag the mail folders from the old to the new and then delete the old.

HT1277 I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

Do you have one, two or more entries in the left colum of Mail.app for your mail server(s)? That is, do you have your Mail.app set up with either a btinternet entry, with a btyahoo entry, or both? Or more?
I'm guessing that you might have one account (btyahoo?) listed for incoming (IMAP server) mail, and with the outbound (SMTP server) mail is configured and named btinternet.
Based on what little I see posted, it looks like BT uses both btinternet and btyahoo, but I'm not exactly clear on how they have their stuff set up, and their web set gets helpful and tries to help configure my mail — I don't immediately see a single web page with the mail server set-up details. The BT email client set-up starts here.

I ordered an album and i can loaded on my iPod and iPhone but i can't get it on my mac

i ordered an album and i can loaded on my iPod and iPhone but i can't get it on my mac

Hi marymccarthyy,
If the album in question is showing as purchased on the iTunes Store but isn't appearing in iTunes on your Mac, you may want to try redownloading it; the following article may be helpful:
Apple Support: Download past purchases
http://support.apple.com/kb/ht2519
Regards,
- Brenden

Can't receive email on my iPhone 5

Since I got the new iPhone I have not been able to receive any emails on any of my email accounts. went to the troubleshooting and nothings work

I am not sure if this issue is going to help you but lets give it a try.
I know that where im from, which is the Netherlands, I am not able to sent e-mails from my iPhone or any other mobile device by using 3G or a random WIFI acces point. The provider only allowes you to sent e-mails when you are connected to a network of there own. Which means if you have provider "101" and your email settings are set up for this provider in your iPhone but your using the network of a friend of yours which is provider "202" you cannot sent emails from his network. Though you can receive them you may not sent.
As I said, I am not aware if this issue is the same for you totaly depents on the country and provider your using.

Can't receive emails on my iPhone or Macbook

Hi, there's an offline tag beside my inbox. I haven't been able to receive emails for 3 days on either my iPhone or Mac, but I can receive them on my iPad. I've tried everything without success. Could it be possible there's an outage on a particular server?

This can happen if you're using a POP mail account and you're not waiting long enough until the device has signed out from your mail server. See also this help article: http://support.apple.com/kb/TS2621

TS5185 Hello I bought a different phone and no longer have th iPhone, but I can not receive text messages from iPhone users what can I do, since I don't have the phone

Just bought a new Galazy phone, and I can not receive messages from family and friends that have an Iphone, and I no longer have the phone.

Contact Apple Support to deactivate iMesaage: https://www.apple.com/support/appleid/contact/

RS-485: PC can send/receive data from PCI card, but LabVIEW can only send to card.

I have a master/slave setup with a 2-wire RS-485 connection via a StarTech PCI2S485 card http://www.startech.com/product/PCI2S485-2-Port-PCI-RS-422-485-Card-with-DB9. A Vista PC running LabVIEW 2010 is acting as the master to 6 slave devices. I am running a driver VI supplied by the company that made the slaves.
I've used a terminal program called Termite to monitor the ports during operation and have concluded that both the PC and the slaves are sending correct data packets (i.e. correct protocol and reasonable data). Termite indicates that the slave's response is being received by the PCI card, but the problem is that LabVIEW simply isn't reading the response from the card. Each time the driver VI is run it returns a "timeout waiting for slave to respond" error.
The VI and slaves I am using are designed for both RS-232 and 485 communication. I've verified the VI to run in 232 mode on a different COM port. I also wrote a simple VI using the VISA functions to test the ports on the PCI card, but I've had the same results. Hardware connections have been looked over carefully, but the fact that the card actually sends a correct message and receives a correct message indicates a different problem.
Any idea why LabVIEW can talk to the PCI card but can't hear it? Is there anything I can do about this, or does LabVIEW generally not like StarTech's PCI2S485 cards?
Thanks,
Tim

Tim359 ha scritto:
I have a master/slave setup with a 2-wire RS-485 connection via a StarTech PCI2S485 card http://www.startech.com/product/PCI2S485-2-Port-PCI-RS-422-485-Card-with-DB9. A Vista PC running LabVIEW 2010 is acting as the master to 6 slave devices. I am running a driver VI supplied by the company that made the slaves.
I've used a terminal program called Termite to monitor the ports during operation and have concluded that both the PC and the slaves are sending correct data packets (i.e. correct protocol and reasonable data). Termite indicates that the slave's response is being received by the PCI card, but the problem is that LabVIEW simply isn't reading the response from the card. Each time the driver VI is run it returns a "timeout waiting for slave to respond" error.
The VI and slaves I am using are designed for both RS-232 and 485 communication. I've verified the VI to run in 232 mode on a different COM port. I also wrote a simple VI using the VISA functions to test the ports on the PCI card, but I've had the same results. Hardware connections have been looked over carefully, but the fact that the card actually sends a correct message and receives a correct message indicates a different problem.
Any idea why LabVIEW can talk to the PCI card but can't hear it? Is there anything I can do about this, or does LabVIEW generally not like StarTech's PCI2S485 cards?
Thanks,
Tim
RS232 interface consist of 2 indipendent communication crossed lines between 2 devices (9DSub connector: Pin 2-RX Pin 3-TX pin 5-Gnd)
RS485 interfaceis a bus, shared between 2 or more devices. (like ethernet or CAN Bus)
This means that an incorrect use of the bus can lead to a "packet collision" if 2 or more devices try to send a message on the bus at the same time or at least their messages, partially "overlap"
About 10 years ago I have used a PCI 2 RS485 port: I remember that I have to change the status of RTS serial control line to switch between transmit and receive mode.
This can be done using the serial VISA property:
Serial Settings --> Modem Line Settings --> DTR State
or using the VI
<LabVIEW dir>\vi.lib\Instr\_sersup.llb\serial line ctrl.vi   (LV 8.6.1)
The result was that the slave device connected, send me the response after few nanosec. causing the lost of the answer.
because LabVIEW use more than some nanosec. to change RTS property after sending message on the 485 bus calling a VISA Write.
So for me there was 2 possibilities:
- use 2 RS485 port (1 for transmit 1 for receive echo transmit included)
- use this converter
         http://www.advantech.com/products/ADAM-4521/mod_2E78D425-8B08-43F6-81B0-1B924E53E075.aspx
this converter, after sending a message on the bus, electronically switchs back to receive mode without losing a byte.
But the question is :
what does it means
"RS-485 mode supports Auto Transceiver turn around (ATTA)"
of your card?
bye

HT3529 I had a iphone 4s with imessage activated, I switched to android and now I can still text other people with iphones but they can't text me. What can I do?

I Had an iphone 4s with imessage activated, I switched to an android and now I can't recieve texts from iphones that have imessage turned on. What can i do?

iMessage works by linking your Apple ID with your phone number
When you send and receive messages to and from other iPhone users who’ve also got iMessage activated, they’re sent and delivered over the internet as iMessages rather than as SMS
Non-Apple phones can’t receive iMessages so if you no longer use an iPhone, you need to deactivate it. This lets iPhones know to send you messages via SMS instead
If you’ve got access to your iPhone
Ensure your phone is connected to the internet (3G or Wi-Fi) so that the changes will sync with your Apple ID.
Go into ‘Settings’.
Tap ‘Messages’.
For ‘iMessage’, move the slider to ‘Off’.
If you don’t have access to your iPhone
Go to supportprofile.apple.com/MySupportProfile.do.
Log in with your Apple ID and password.
Select the product you need to de-register (your iPhone, for example).
Click ‘Unregister’.
You’ll see the message ‘Are you sure you want to unregister and delete this product?’ – Click ‘Unregister’ again.

I can't receive my gmail messages anymore but I can send them.I have an IPad mini

Ii

Hi HollyH47,
Thank you for using Apple Support Communities.
The following article provides some troubleshooting for the issue you descrebe about not receiving email from Gmail.
Gmail account cannot get or send email in iOS - Apple Support
Cheers,
Jeff D.

I can see the photo on my iphone but I can not download it

My situation is as below:
1. I reset all settings on iphone
2. Then iphone restart and ask me whether I want to restore from iCloud or iTunes
3. I choose iCloud and it start to restore
4. after the restore, I have 1017 photos on my iphone but many of them are in poor resolution
5. I think there should be problems during the restoration
6. So, I want to make sure these photos can be saved now in case I may lose them in the next restoration
7. Therefore, I connect my iphone to macbook air and try to import the photos into iPhoto
8. However, I can only import those photos with high resolution and those with low resolution is not able to be imported
Is there anyone also encounter this problem and can give me a hand?
Many thanks!!
Frank

Have you tried Image Capture...in your Applications Folder. If not, see if Image Capture can see/import these photos.

HT4864 Can I delete email on my iPhone and have my ipad also delete them on its own?

Can I delete mail on my ipad and have it tell my iPhone to delete it automatically?
I thought this is what iCloud would do?

You're welcome. If you're using a POP account, not even a 10 year old can help you. You'll have to get an IMAP account (such as iCloud email, Gmail or Yahoo), then forward your old account to your new one until your contacts learn to use your new email address.

Why can i receive emails on my iphone, but I can't reply to them

Similar Messages

Maybe you are looking for