Why can I send but not receive them?
Why can I send but not receive them?
Macrumors posted a solution for this. I used it and it seems to have worked for me.
Here's what they said:
1. Turn off iMessage in Settings > Messages
2. Reset networking settings in Settings > General > Reset
3. Reenable iMessage in Settings > Messages
Source:
http://www.macrumors.com/2013/09/30/resetting-network-settings-may-fix-imessages -not-working-in-ios-7/
Similar Messages
-
Why can I send, but not receive mail?
I have an exclamation mark in a triangle next to Inbox. It says the connection to the server is timed out. I have not been able to receive any mail.
I would compare the account settings to verify that smpt server and ports and encryption and the likes was
set the same on mac vs. the ios devices
if it were I would look if the mac's firewall was blocking the stmp -
Microsoft lync client can make calls but not receive them
So I have our Lync server all set up…I can make outgoing calls, but I cannot receive them on my client. I have the URI fully populated with my direct line. Why can’t I receive calls? I have this integrated with my call manager as well.Hi,
1. Please try to check mediation server listening ports.
2. Please also make sure do populate the telephone number field in AD user’s account. Please refer to the following link to verify if LineURI is set correctly.
http://www.lynclog.com/2011/05/enterprise-voice-lync-2010-one-of-many.html
3. Would you please check your configuration of CUCM routing? Here is the information about
configuring Cisco Unified Communications Manager 7.1:
http://blogs.technet.com/b/drrez/archive/2010/10/12/direct-sip-cisco-unified-communications-manager-7-1.aspx
Another more information just for your reference:
http://blog.unplugthepbx.com/2011/03/16/integrating-microsoft-lync-and-cisco-unified-communication-manager-part-3-configuring-cucm-to-route-calls-to-lync/
Regards,
Kent -
I can make calls but not receive them on lync 2013
For some reason I can not receive calls from anybody in Conference mode or PC to PC in some users. What type of logs can I enable on lync to verify this? I tried disabling an re-enabling again the user on lync and some users seem to work this, but
in others not.
Thanks for your help.If you have deployed the Lync Monitoring Server you can look at the CDR and QOE data for calls: http://www.microsoft.com/en-ca/download/details.aspx?id=890 If you haven't
deployed the Monitoring server, it's recommended when doing voice: http://technet.microsoft.com/en-us/library/gg398199(v=ocs.14).aspx
You can also use snooper to trace calls (4 part blog explaining): http://blogs.technet.com/b/nexthop/archive/2012/04/16/troubleshooting-lync-server-2010-with-snooper-part-1.aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013. -
Why is iMessage sending but not receiving or syncing on iMac.
For the past week I have suddenly been having trouble with iMessage on my iMac. Thought it was fixed but the problem has returned.
I can send an iMessage say to my wife's Macbook but when she replies it only goes to my iPhone 5s and not to my iMac.
Found another discussion here on Apple Support Communities on not syncing between devices and tried the suggested remmedies with no luck.
JohnIt's not clear whether you've done all the following.
Associate your mobile number with your Apple ID, if you haven't already done so.
Sign out of iMessage on the Mac:
Messages ▹ Preferences ▹ Accounts ▹ Sign out
and on the iPhone:
Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
Then, on the phone, tap
Use Your Apple ID for iMessage
Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions.
Credit for this solution to ASC member SmittyLove and to Glenn Fleishman of tidbits.com. -
Why will "mail" send but not receive?
Hello, mail program sends mail, but won't receive. I've restarted twice, and restarted modem too, but mail continues to not work properly. Any suggestions?
Try this maybe some help here.
http://www.apple.com/support/macosx/mailassistant/ -
I can send emails but not receive them. The sender address was rejected by the server
i can send emails but not receive them. The sender address was rejected by the server.
Your mail server doesn't like the sender's address for some reason, perhaps because his mail server has been blacklisted for spamming.
-
Upgraded to Tiger; Mail can Send, but not receive... help!
Hi there,
I've come across lots of issues people have had importing all their mailboxes when they've upgraded from Panther to Tiger, but my wife's problem is different - - Mail can Send, but not receive. 'Get Mail' hasn't worked since the upgrade. I've been on the phone with my POP server provider, and all my Mail Account settings are correct. I can send mail, as I say, and sure enough, there it is in her Hotmail web page, along with all the other messages people have sent her in the last two weeks...
So why can't Mail 'get' these messages, if all the settings are correct?
Any advice would be appreciated.
MalcolmYou’re welcome.
If you deleted a POP account, then all the messages stored in that account’s mailboxes has certainly been wiped out, not just moved somewhere, and you were warned that this would happen by the following alert:
Remove Account
Are you sure you want to remove the <AccountType> account "<AccountName>"?
This will permanently delete the account setup information, mailboxes, and messages from your computer. Messages stored on the mail server will not be affected.
To prevent that from happening, you should have moved those messages to custom “On My Mac” mailboxes instead of leaving them in the account’s mailboxes. Actually, using Inbox and Sent for archiving purposes is a bad idea regardless.
If the messages are not on the server and you don’t have a backup (which you should have made before doing something like that), you may try to salvage as many deleted *.emlx files as possible with a data recovery tool such as Data Rescue II, TechTool Pro, or FileSalvage (the files to be recovered would be different in the case of Mail 1.x). Of these, the only one I know for sure that can currently recover deleted *.emlx files is FileSalvage. Stop using your computer right now if you want to try that, as anything you do with the computer may cause the deleted files to be overwritten. -
I have an iphone6. And out of the blue my group messages aren't working. I can send but not receiving any back. Any ideas??? I already reset my phone twice.
You should check that your settings (both directions) match this:
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead.
Your signature says you have 10.6.8 - is this correct? If you migrated from MobileMe using this your mail settings won't be correct and you will need to follow this procedure to re-enter them:
Entering iCloud email settings manually in Snow Leopard or Leopard -
E71 Imap, can send but not receive
HI all
I received my E71 about a week ago and having major problems configuring it with my work email.
Its an IMAP mail. I can send fine but on most occasions cannot receive. Occasionally it downloads some mails but only twice in the last week. I think this shows the settings are correct.
Have tried to sign up with Nokia mail but get the following error message:
'Unable to connect with the information provided. Please try again.'
My colleagues in the UK use Blackberrys fine and have spoken with IT and they cannot think of any reason why this is happening. I have deleted the mailbox and set it up again many times but still can send but not receive...
Very grateful for any advice as really happy with the phone other than this which is the main reason why I bought it.
ShaneHi Anne,
Is this IMAP or POP account?
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot. -
Can send but not receive email
I have contacted my ISP and confirmed my password and settings. I can log on and send but not receive. The emails are on the server. This problem started after I installed the latest apple security update. The isp tech felt everything was ok there and that the problem was due to the security update blocking incoming mail.
Any ideas on how to fix this?
Henery
powerbook15 Mac OS X (10.3.9) mail version 1.3.11 (v622/624)Thanks, Dave!
I had the same problem. Could send but not receive, on three email accounts all of which were on the same server. The other four accounts on two different serves worked fine. This was a sudden change and I had not changed any mail prefs for several weeks or anything on the server end in months. I spent 3.5 hours on this this evening, excahnging emails with customer suppert at the server (using the other accounts of course), going through the complicated webstie to check the server configuration, checking the prefs in mail over and over and over, setting up the email on another computer to discover it worked, throwing everything realted to these three accounts out of keychain thinking maybe it had saved an old password.
Came in here to post a plea for help and read your message. The offline bits were set. And the list of accounts under the IN heading had been collapsed (I generally have it open, don't know how it was collapsed) so that I couldn't see the obvious offline indicator. !!!
Thanks again! Where were you 3.5 hours ago?
Bob H -
Using iMac with OSX 10.7.5. Can send but not receive emails. No problem with internet account. Server rep tried everything and suggested perhaps a corrupted file in the op syst. Any ideas?
You may have a corrupt preference. Mail - Preferences - Accounts - click the offending account and re-enter all prefereneces. Also you can use Apple's OS X Mail: Troubleshooting sending and receiving email messages located at:
http://support.apple.com/kb/ts3276 -
I can send but not receive email
Hello All. I know this is a highly posted topic but I cannot find a solution. Any help is greatly appreciated.
Basic Problem- I can send but not receive email.
My ISP is. Yahoo SBC Global
I have a 3rd party email provider: 1and1.com
I have set my preferences according to the specifications of 1and1.com
The error I get is this: The server error encountered was: The attempt to read data from the server "pop.1and.com" failed.
I have a Macbook Pro, running 10.4.9. My account with the 3rd party email provider is new and only has 1 or two emails in the account. I know this because I can log on via the internet and use their website to check the emails in the inbox. So the "email" address is working. I just can't get it to forward to my laptop.
I'm wondering if it has something to do with port 110 being blocked by my ISP. But I really don't think they are blocking that port. Due to the fact that my previous computer was a dell, and I used a similar 3rd party provider to email, the account used port 110 and things worked fine.
Thanks to all.Ok. I've got it working.
All I did was delete my account information from the preferences. Before, I was editing it.
I entered a completely new POP account and it started working. I have a hard time believing that I entered information incorrectly prior to this because I checked it, rechecked it had a friend check it and it all looked OK. I was copy and pasting information anyway.
However, once I deleted and re- entered a brand new account, it worked fine.
Ernie, thanks for replying to my emails! I appreciate it.
-Fraky -
HI
I have full signal and have wifi but I'm can't send messages or receive them. I can't make phone calls either. it picks and chooses when I can receive them and make calls. It only works everytime I turn my phone off.Try turning on Airplane mode for a little bit (20-30 seconds) and turn it back off. see if that doesn't allow you to re-connect.
In my current project my office receives no signal at all. I have to do this almost every time I leave the office in order to get a signal. -
Exchange mail- can send but not receive?
Anyone had this problem?
I have the mail app set up with my company's exxchange server as the incoming, outgoing and OUtlook webs access servers and no go, I can send but not receive in the app....
-cCheck with your Exchange administrator.
Maybe you are looking for
-
Hi guys. After updating to 7.0.6 my iphone 5s is no longer showing in itunes. Strangley it is recognised by my PC (windows 8) when I click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date, but this has made
-
Aperture library won't load!
All of a sudden I am getting the message: The library in "/Users/`/Pictures/Aperture Library.aplibrary" cannot be loaded because it is from a newer version of Aperture, so I can't run Aperture. I am running V 3.02 I haven't changed anything at all, s
-
How do you *unset* Content-Type when using HttpURLConnection ?
Hi people, I am using HttpURLConnection to set some http headers. It all works fine except that this utility is setting Content-type to text/html even though I cam not coding it to do so. I can overwrite Content-type by setting it to say, a blank, ex
-
Unable to boot up/into (win7) bootcamp partition following Mountain Lion upgrade
Greetings to all, I hope somebody could please help me with this issue; A few days ago I upgraded to mountain lion, and immediately after the upgrade was completed and the system rebooted, I discovered that a new partition (Recovery-10.8) had su
-
Trouble importing large number of photos from network drive
I just purchased my first Mac. I have attempted to import my photo library from my NAS device. Iphoto takes hours to perform this import. In fact after 2 days of watching it crunch, I terminated the import. I can see and open the photos from the iMac