Why can PS/Bridge CS6 no longer read RAW Metadata after update?

There was an update today and now all my .xmp files are being erased from my associated Canon 1DX RAW Images. Either the new update is deleting these files or can't read the associated metadata of the RAWs. I shoot RAW and JPEG and I do see that the info is still associated with the JPEGs.
Also - I cannot write or modify the RAW info to assign copyright, keywords, etc.
I am on a Mac Pro running OS X 10.9.2

Do you have disk cleaner tools like MacKeeper/CleanMyMac installed?
Please refer
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
Regards,
Ashutosh

Similar Messages

  • Bridge CS4 no longer reading Raw files after reinstalling PS CS4

    I recently uninstalled PSE8 (using Adobe installer) and was prompted to reinstall PS CS4.  I did this and now Bridge is no longer reading my Raw files.  I just get a white blank where the image should be.  I tried reinstalling Raw Converter 5.6 but it still does not work. 
    I use a Canon T1i and am running Snow Leopard on my Mac.
    Any ideas how I can get Bridge working again?
    Thanks.

    debwarr3 wrote:
    If this is the same thing as Adobe Camera Raw 5.6 (I'm assuming it is),
    Of course it is. 
    debwarr3 wrote:
    …but when I check the version of Camera Raw on Bridge CS4, it's only 5.0.  I don't know why the update doesn't seem to "stick".  Any suggestions?
    You obviously have a bad installation of the Camera Raw plug-in.
    You need to remove the ACR 5.0 plug-in, which somehow you did not remove when installing 5.6, and instal 5.6 in the correct location.  Read the Camera Raw update instructions again, very carefully.  The location is detailed exactly.  Note that you start with the ROOT LEVEL Library, NOT your user library.
    This screen shot is from an earlier post and it shows Camera Raw 5.1 installed.  The path is the same for ACR 5.6.  Note that you can only have one instance of the Camera Raw plug-in installed per version of Photoshop (5.6 for CS4, 4.x for CS3, 3.x for CS2) each in its respective folder.
    Command-click on the thumbnail to see the image at full size in a new web browser window.

  • Why can't down load apps or go onto Facebook after updating it keeps sayin I need ios5

    Why can't I down load apps or get on to Facebook after updating my phone

    Why can't I down load apps or get on to Facebook after updating my phone

  • Problems reading RAW format after update 6.03

    I have problems reading RAW format images into Iphoto 9.6 after update 6.03 or maybe earlier updates (have not imported for a few months). The images show up like half, black or partly distorted. I use a Canon 5D mk2 camera. The images looks okey when read into a PC so I don´t think it is the camera or cables. It has been working very good before! I use a Powerbook pro 13 late 2011 with Yosemite 10.10.1.

    Try downgrading back to 6.02 by following the directions in this post by léonie:
    Apple image including Apple logo changes for feature 126 Apple image ends here
    Dec 28, 2014 7:36 AM
    Re: Digital Camera Raw Compatibility 6.02 - Nikon D800
    in response to ceylin.e
    [DocumentBodyStart:3bf5afd7-94e9-4fb4-acfa-7aa13198efec]
    Make a backup of your system and try to downgrade the RAW support to version 6.01
    To downgrade the RAW Support to the last version from before the last update try this:
    To reinstall the 'RAW Compatibility Update' it is necessary to uninstall the currently installed raw support. Otherwise the installer will rightfully say, that you already have the latest version installed.
    If your tests are showing that the problem happens also in a different user account, try this:
    The RAW support files are installed in the System Library in the folder "/System/Library/CoreServices" Folder:
    To open this folder, use the Finder's "Go" menu. Click the smiling Finder icon in the Dock to bring the Finder forward.
    Then type the keyboard shortcut ⇧⌘G  (for "Finder > Go > Go to folder")  and copy and paste "/System/Library/CoreServices" into the text field. Click the "Go" button.
    In the Finder window that will open, delete both the files "RawCamera.bundle" and "RawCameraSupport.bundle". You will have to enter your Administrator password. (don't empty the Trash, so you can put the files back, if need be)
    Download the current RAW support update from Apple's Support Site:
    Digital Camera RAW Compatibility 6.01 http://support.apple.com/kb/DL1777?viewlocale=en_US&locale=en_US
    In the Downloads folder you will find the disk image with the installer. Double click it to open and run and the installer.
    Then restart your Mac.

  • Kernel can no longer read usb devices after update

    after running a Pacman -Syu yesterday which included a kernel update to kernel26-2.6.32.10-1-x86_64.pkg.tar.gz, i can no longer use any usb devices, my arch 64 laptop simply does not recognize them, anyone else have this problem?
    when i attempt to downgrade... the kernel i simply get
    [root@Arch aaron]# pacman -U kernel26-2.6.32.8-1-x86_64.pkg.tar.gz
    loading package data...
    error: 'kernel26-2.6.32.8-1-x86_64.pkg.tar.gz': cannot open package file
    [root@Arch aaron]#
    i can get you any outputs you need, i just need a solution to  this quickly! i can't wait for the next update

    ok it is definitey a gz file (or at least the kernel is... how do i check if the others are?
    here is my pacman.log output
    [2010-03-19 00:09] upgraded mysql-clients (5.1.44-1 -> 5.1.45-1)
    [2010-03-19 00:09] upgraded mysql (5.1.44-1 -> 5.1.45-1)
    [2010-03-19 00:09] upgraded amarok (2.2.2-4 -> 2.3.0-1)
    [2010-03-19 00:09] upgraded apr (1.3.9-1 -> 1.4.2-1)
    [2010-03-19 00:09] upgraded apr-util (1.3.9-3 -> 1.3.9-4)
    [2010-03-19 00:09] upgraded x264 (20100207-2 -> 20100312-1)
    [2010-03-19 00:09] upgraded ffmpeg (30526-1 -> 22511-1)
    [2010-03-19 00:09] see http://wiki.archlinux.org/index.php/Openoffice
    [2010-03-19 00:09] how to use extensions, e.g. for spell checking
    [2010-03-19 00:09] see /usr/lib/go-openoffice/share/extension/install what
    [2010-03-19 00:09] is shipped with this package
    [2010-03-19 00:09] upgraded go-openoffice (3.2.0.6-1 -> 3.2.0.8-1)
    [2010-03-19 00:09] upgraded gstreamer0.10-bad (0.10.18-1 -> 0.10.18-2)
    [2010-03-19 00:09] installed soundtouch (1.5.0-1)
    [2010-03-19 00:09] upgraded libdc1394 (2.1.0-1 -> 2.1.2-1)
    [2010-03-19 00:09] upgraded gstreamer0.10-bad-plugins (0.10.18-1 -> 0.10.18-2)
    [2010-03-19 00:09] upgraded gstreamer0.10-ffmpeg (0.10.9-1 -> 0.10.10-1)
    [2010-03-19 00:09] upgraded gstreamer0.10-ugly (0.10.14-1 -> 0.10.14-2)
    [2010-03-19 00:09] upgraded gstreamer0.10-ugly-plugins (0.10.14-1 -> 0.10.14-2)
    [2010-03-19 00:09] upgraded kernel26-firmware (2.6.32.9-1 -> 2.6.32.10-1)
    [2010-03-19 00:10] >>> Updating module dependencies. Please wait ...
    [2010-03-19 00:10] >>> MKINITCPIO SETUP
    [2010-03-19 00:10] >>> ----------------
    [2010-03-19 00:10] >>> If you use LVM2, Encrypted root or software RAID,
    [2010-03-19 00:10] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2010-03-19 00:10] >>> More information about mkinitcpio setup can be found here:
    [2010-03-19 00:10] >>> More information about mkinitcpio setup can be found here:
    [2010-03-19 00:10] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2010-03-19 00:10]
    [2010-03-19 00:10] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2010-03-19 00:10] ==> Building image "default"
    [2010-03-19 00:10] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2010-03-19 00:10] :: Begin build
    [2010-03-19 00:10] :: Parsing hook [base]
    [2010-03-19 00:10] :: Parsing hook [udev]
    [2010-03-19 00:10] :: Parsing hook [autodetect]
    [2010-03-19 00:10] :: Parsing hook [pata]
    [2010-03-19 00:10] :: Parsing hook [scsi]
    [2010-03-19 00:10] :: Parsing hook [sata]
    [2010-03-19 00:10] :: Parsing hook [uresume]
    [2010-03-19 00:10] :: Parsing hook [filesystems]
    [2010-03-19 00:10] :: Generating module dependencies
    [2010-03-19 00:10] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2010-03-19 00:10] ==> SUCCESS
    [2010-03-19 00:10] ==> Building image "fallback"
    [2010-03-19 00:10] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2010-03-19 00:10] :: Begin build
    [2010-03-19 00:10] :: Parsing hook [base]
    [2010-03-19 00:10] :: Parsing hook [udev]
    [2010-03-19 00:10] :: Parsing hook [pata]
    [2010-03-19 00:10] :: Parsing hook [scsi]
    [2010-03-19 00:10] :: Parsing hook [sata]
    [2010-03-19 00:10] :: Parsing hook [uresume]
    [2010-03-19 00:10] :: Parsing hook [filesystems]
    [2010-03-19 00:10] :: Generating module dependencies
    [2010-03-19 00:10] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2010-03-19 00:10] ==> SUCCESS
    [2010-03-19 00:10] upgraded kernel26 (2.6.32.9-1 -> 2.6.32.10-1)
    [2010-03-19 00:11] upgraded kernel26-headers (2.6.32.9-1 -> 2.6.32.10-1)
    [2010-03-19 00:11] upgraded libarchive (2.8.0-1 -> 2.8.3-1)
    [2010-03-19 00:11] upgraded libass (0.9.8-1 -> 0.9.9-1)
    [2010-03-19 00:11] upgraded liboil (0.3.16-1 -> 0.3.17-1)
    [2010-03-19 00:11] warning: /etc/cron.daily/man-db installed as /etc/cron.daily/man-db.pacnew
    [2010-03-19 00:11] upgraded man-db (2.5.6-1 -> 2.5.7-1)
    [2010-03-19 00:11] upgraded man-pages (3.23-1 -> 3.24-1)
    [2010-03-19 00:11] upgraded mplayer (30526-1 -> 30886-1)
    [2010-03-19 00:11] upgraded mtools (4.0.12-1 -> 4.0.13-1)
    [2010-03-19 00:11] upgraded mutagen (1.18-1 -> 1.19-1)
    [2010-03-19 00:11] upgraded polkit (0.96-1 -> 0.96-2)
    [2010-03-19 00:11] upgraded tzdata (2010b-1 -> 2010e-1)
    [2010-03-19 00:11] upgraded unrar (3.9.9-1 -> 3.9.10-1)
    [2010-03-19 00:11] upgraded vi (050325-2 -> 050325-3)
    [2010-03-19 00:11] upgraded vlc (1.0.5-4 -> 1.0.5-5)
    [2010-03-19 00:11] upgraded xorg-server (1.7.5.901-2 -> 1.7.5.902-1)
    [2010-03-19 02:09] synchronizing package lists
    [2010-03-19 02:11] synchronizing package lists
    [2010-03-19 02:11] starting full system upgrade
    [2010-03-19 02:12] upgraded smbclient (3.5.0-2 -> 3.5.1-1)
    [2010-03-19 09:06] synchronizing package lists
    [2010-03-19 09:06] starting full system upgrade
    [2010-03-19 09:44] >>> Updating module dependencies. Please wait ...
    [2010-03-19 09:44] >>> MKINITCPIO SETUP
    [2010-03-19 09:44] >>> ----------------
    [2010-03-19 09:44] >>> If you use LVM2, Encrypted root or software RAID,
    [2010-03-19 09:44] >>> More information about mkinitcpio setup can be found here:
    [2010-03-19 09:44] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2010-03-19 09:44]
    [2010-03-19 09:44] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2010-03-19 09:44] ==> Building image "default"
    [2010-03-19 09:44] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2010-03-19 09:44] :: Begin build
    [2010-03-19 09:44] :: Parsing hook [base]
    [2010-03-19 09:44] :: Parsing hook [udev]
    [2010-03-19 09:44] :: Parsing hook [autodetect]
    [2010-03-19 09:44] :: Parsing hook [pata]
    [2010-03-19 09:44] :: Parsing hook [scsi]
    [2010-03-19 09:44] :: Parsing hook [sata]
    [2010-03-19 09:44] :: Parsing hook [uresume]
    [2010-03-19 09:44] :: Parsing hook [filesystems]
    [2010-03-19 09:44] :: Generating module dependencies
    [2010-03-19 09:44] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2010-03-19 09:44] ==> SUCCESS
    [2010-03-19 09:44] ==> Building image "fallback"
    [2010-03-19 09:44] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2010-03-19 09:44] :: Begin build
    [2010-03-19 09:44] :: Parsing hook [base]
    [2010-03-19 09:44] :: Parsing hook [udev]
    [2010-03-19 09:44] :: Parsing hook [pata]
    [2010-03-19 09:44] :: Parsing hook [scsi]
    [2010-03-19 09:45] :: Parsing hook [sata]
    [2010-03-19 09:45] :: Parsing hook [uresume]
    [2010-03-19 09:45] :: Parsing hook [filesystems]
    [2010-03-19 09:45] :: Generating module dependencies
    [2010-03-19 09:45] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2010-03-19 09:45] ==> SUCCESS
    [2010-03-19 09:45] upgraded kernel26 (2.6.32.10-1 -> 2.6.32.8-1)
    any ideas? i will try dowloading xz-utils!
    EDIT: i definitley already had xz-utils...
    ok i downgraded every package but to no avail.. the problem persists
    i get this message from dmesg repeated over and over again:
    hub 5-0:1.0: connect-debounce failed, port 2 disabled
    hub 6-0:1.0: unable to enumerate USB device on port 2
    hub 2-0:1.0: unable to enumerate USB device on port 1
    i've googled it.. but no one seems to have a solution...
    help?
    Last edited by aaron.kilbride (2010-03-19 17:57:56)

  • Why can't I open and close tabs with scroll, after updating to Firefox 10???

    I updated my Firefox, and opening or closing tabs whit scroll button doesn't work any more.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    Your Firefox 9.0.1 is not the latest version anymore, so please update to the latest Firefox 10.0.x version via Help > About Firefox.

  • Why can't I connect to my home secured wifi after updating to iOS 6?

    After upgrading to iOS 6 it will not let me connect to my secured home network. A "Log In" window pops with a message that says "Hmm that page doesn't exist" what's going on?

    really stupid... but click on the arrow to the right of your netowrk and turn off auto-join

  • Why can't Bridge open my raw files from Canon PowerShot 120-S? Using PS/5

    Why can't Bridge open my raw files from my new Canon Power Shot 120-S camera? I'm using PS-5 and had no problems with other Canon cameras. I downloaded Adobe Camera Raw 8 but this has not resolved the problem.
    Jack

    1. you need cr 8.3+ for the Canon PowerShot S120
    2. ps cs5 can only update to cr 6.7
    free solution: use the dng converter: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
    integrated solution: upgrade to ps cc.  here are the options (but especially note the photographer plan for 9.99/mo) - http://www.adobe.com/products/photoshop/buying-guide.html

  • Why can't my adobe programs be read?

    Why can't my adobe programs be read?

    I don't know of any program from Adobe that will do that, but I'm probably just misunderstanding.
    Let's take just one of these files.
    What type of file was it before this happened?
    What happens now when you tried to open them? Please give error messages EXACTLY.
    "Can't read" tells us nothing that lets us help you, sorry.

  • Recently installed Tiger on our older eMac why can't I download a PDF reader Adobe etc. that will open e-mail files

    Recently installed Tiger on our older eMac why can't I download a PDF reader Adobe etc. that will open e-mail files.
    I have other questions but well take them one at a time thanks
    lewielouie

    You need Adobe Reader version 8.1.1 from here:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=3807

  • Bridge CS3 no longer renders RAW thumbnails

    Running PSE9 on OS 10.8.2 Mountain Lion.  Also running Bridge CS3 2.1.1.9 that I believe came bundled with PSE4 and which I have become fond of using as a tool for importing photos and other steps early in my workflow.  I shoot almost exclusively in RAW and sometimes in RAW/JPEG.  Recently, having made no change that I can remember, Bridge is no longer able to render thumbnails of the RAW files, instead showing just a thumbnail of a white sheet with the corner turned down; JPEG thumbnails render just fine.
    I would be extremely grateful for anyone that can help me get the RAW thumbnails working again.  I suspect some anciliary file outside of the main program package since Adobe is so fond of sprinking useful files all over the place if that rings any bells.
    I have tried to find a standalone Bridge CS3 installer on the web that I might use to re-write whatever is missing but I cannot find it.  It's an unusual request but if anyone would lend theirs to me I would also be grateful.
    Thank you in advance.

    Turns out my sister is more a packrat than me and she still had her original PSE6 disk, which was also bundled with Bridge CS3.  Uninstalled/deleted 9 and Bridge and removed every trace of them and prior versions I could find (e.g Library files) to a flash drive.  Installed 6 along with Bridge and all seems to be back to normal.
    Hopefully everything else still works right and I won't have to try-and-err putting Library files back one-by-one or something.  Once it feels like all is stable I'll be putting in my upgrades to PSE9.
    Thanks for your suggestions.

  • Why can't I download Canon S100 CR2 RAW files into PSE 10?

    I am using PSE 10 with a Canon S100 camera. I am successful in downloading all of my jpeg files and RAW CR2 files from my older Canon Rebel, but not with the Canon S100 CR2 Raw files.
    When first downloading from the Canon S100 camera into PSE 10 and later doing them manually, I receive the following messages:  Nothing imported...files are not supported file types or alread in catalog.  File damaged or in a format that cannot be included in the Elements Organizer.
    These problems files, by the way, were automatically added to my Window's My Pictures catalog and are perfectly fine.

    Thank you for the info. It worked great, once I was
    able to get around a second problem that prevented updating
    from within the PSE 10 application (error U41M1C212). That
    problem was solved by disabling the MS Virtual WiFi Miniport
    Adapter (located in the Network and Sharing Center control
    panel). It just goes to show me once again, how complex
    computer apps are and how much we all have to rely on each
    other to get anything to work properly (frustratingly
    enough, since the companies we paid good money to for
    their problematic software are not very helpful). Thanks
    again.
                Re: Why can't I download Canon S100 CR2 RAW files into
    PSE 10?
                created by 99jon in Photoshop Elements - View the full discussion
    Try opening a CR2 directly from a folder by right-clicking
    and choosing open with Photoshop Elements editor, if that
    dosent work, update the appliactaion (required for the
    S100V)
    In the Editor menu click Help >> Updates
    Then install amera raw 6.7
                Replies to this
    message go to everyone subscribed to this thread, not directly
    to the person who posted the message. To post a reply, either
    reply to this email or visit the message page:
    http://forums.adobe.com/message/4602882#4602882
                To unsubscribe from
    this thread, please visit the message page at
    http://forums.adobe.com/message/4602882#4602882. In the
    Actions box on the right, click the Stop Email
    Notifications link.
                Start a new discussion
    in Photoshop Elements by email or at Adobe Forums
                For more information
    about maintaining your forum email notifications please go to
    http://forums.adobe.com/message/2936746#2936746.

  • HT3775 why can't i play .wmv file in quicktime even after i download codec from windows? can anyone help me wit this please!!!!!

    why can't i play .wmv file in quicktime even after i download codec from windows? can anyone help me wit this please!!!!!

    Have you done the obvious things to try to fix it: quit Quicktime then start it back up again, log out then back in, reboot.
    Edit: Just read one of your later posts. If VLC won't play it, this is unrelated to Quicktime and Flip4Mac. Are you sure these wmv files are okay?

  • Why can't I stop and restart my ipod touch OS update?

    Why can't I stop and restart my ipod touch OS update?
    I'm working in West Africa, and iTunes says it will take between 8 and 11 hours to download the OS (5.0.1). But I never have that long a stretch of uninterrupted electricity or internet. Every blink off and I have to start again at zero. Bit torrents are already an old technology. What gives? Basically, I WILL NEVER BE ABLE TO UPDATE MY IPOD. And probably not my macbook.

    Try a manual update as defined here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

  • Why can't i use wifi on my iphone 4s after i downloaded IOS7

    why can't i use wifi on my iphone 4s after i downloaded IOS7?
    thankful for answer!

    Well, there are probably dozens of possible answers based on the nature of the problem, so a little more information would be useful.
    Is the WiFi switch greyed out? If so, see: http://support.apple.com/kb/TS1559
    Is the problem with only one network? If so, reboot the router by removing all power from it for about 30 seconds. Even if other devices still work on that router (the router and iPhone may have gotten out of sync on the time remaining on the iPhone's IP address lease).
    If the WiFi switch is not greyed out, but the phone doesn't find any networks, go to Settings/General/Reset - Reset network settings.
    If that fails, go to Settings/General/Reset - Reset All settings.
    And if the problem is not described in this message please provide more information.

Maybe you are looking for

  • Windows crash when connecting BB

    I have 64-bit Vista SP1 with DTM 5.0.1 (sorry, don't have the exact build number handy - the machine is at home, and I'm at work). Everytime I connect my BB to the machine, it crashes with a BSOD. The machine was very, very stable for a long time, bu

  • Disordered data ussing open hub

    hi , i want to extract data from ODSDataStage>MQ. lets assume i have 15000 records, and i need to know which is the last record. the packaging was set to 5000. for example. XXXX XXXXX XXXX XXXXX XXXX 0 XXXX XXXXX XXXX XXXXX XXXX 0 XXXX XXXXX XXXX XXX

  • Can't add printers.

    I'm running Mavericks on a mid-2010 MacBook Pro. Up until I upgraded, I was able to access my ImageRunner iRC3220 and HP 4MP Laserjet printers on my wired network. After the OS upgrade, the printers remained idle and unresponsive in the utility. I re

  • TS3694 what can i do about error (6) to fix it and install my software update. my iPhone is blocked now and it show the cable and itunes logo's .

    i made the update for IOS 6  with the latest version of iTunes and it downloaded the latest version of IOs 6 after that, when it was trying to intall the update it gave  me an error ( error (6) )  , now my iPhone is in the stage where it shows me a c

  • Windows installer erreur : impossible d'installer icloud ou Itunes

    Bonjour. Utilisateur de Windows 7 (64), je rencontre une impossibilité totale d'installer iCloud ou iTunes. Historiquement, j'avais installé le tableau de bord Icloud et au moment d'installer iTunes j'ai rencontré le message d'erreur suivant : "un pr