Why can some functions not be found in Win2000?

Hi,
I have made a project which works well in win98.The software workbench is labview6.0.But it pops up an error "can not find 'in port' and 'out port' functions." running in win2000.I wonder if it is not compatible in win2000 or the ports aren't be openned in win2000?
Dilly

You will need to install a special driver for this to work in Windows 2000/NT/XP.
Here is a link:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DEBD56A4E034080020E74861&p_node=ZONE&p_source=external

Similar Messages

  • I have downloaded a trial version of Dreamweaver CS6 to my MacBook. Why do some features not work?

    I have downloaded a trial version of Dreamweaver CS6 to my MacBook. Why do some features not work? I have OSX 10.6.8. I am using this trial version for a class I am taking on coding webpages using Dreamweaver. there are features I am using in class that will not open up or appear as options when I use the trial version. Are certain features locked out until I buy a copy or download a purchased copy?

    Trial versions have no functional limitations, though your setup/situation might not be supportive of all functionality.  You'll need to identify specific issues to get help with them.  You should be posting in the DW forum instead of here if your issue does not have to do with downloading/installing.

  • Why can the microphone not be working when I speak normally and be working when I use the speakerphone?

    why can the microphone not be working when I speak normally and be working when I use the speakerphone?
    anyone has had the same problem? Thank you!!!

    Apple confirmed, it is an iphone 4S feature, that is intended for our 'benefit'.  It is being solved by each of us using headphones to over-ride the muting function.

  • TS3989 Why will some pictures not stream from iphone4s to ipad2,pictures taken before and pictures taken after have ,but some won't

    Why will some pictures not stream from iphone4s to ipad2,pictures taken before and after transferred ok but some won't.Any suggestions

        1.    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
        2.    Photostream only syncs when the camera app is closed, ensure it is closed.
        3.    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

  • HT1977 I bought apps. My kid delet that after few weeks. Then I have downloaded to same ipad. But some functions not working.

    I purchase some apps, my son deleted some. But I have download again from cloud. But some functions not working ask me to pay again. How can I use functions without paying again.   Thank you

    Search around on the app settings and see if there's a "Restore purchases" option.

  • Disc Burner. Why are some files not readable or writeable?

    Hello,
    I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
    "The operation cannot be completed because some data cannot be read or written.
    (Error code - 36)"
    Followed by the choices: "Stop" or "Continue".
    I have a bad feeling that my startup disk is too small but I am not sure.
    Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
    Here are the specifications:
    Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
    I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
    I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
    Here is my process (I hope I am doing this right - I am new at this):
    1. I first insert a blank DVD-R
    2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
    3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
    Why would some files not be readable or writeable?
    4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
    "Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
    However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
    Am I doing this the right way?
    Why are some files not "readable or writeable" as it indicates in the error message?
    Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
    Thanks

    To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
    Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
    Thanks Kappy

  • Music in library, why are some songs not marked with cloud?

    Music in library, why are some songs not marked with cloud icon?

    Welcome to the Apple Community.
    Where exactly are you looking and what do they look like, there are several iCloud icons used in iTunes.
    Maybe a screenshot.

  • Why can I now not print direct from a PDF from an email

    Why can I now not print direct from an email file attatchment

    Can you explain in better detail?
    Is it when you open the file attachment and attempt to Print?
    Is it right-mouse clicking and attempting to Print?
    Is it when you print the email itself and expect the attachment to Print?

  • TS3276 Why can i suddenly not send out mail using mail through my ntlworld account

    Why can I suddenly not send out mail using Apples Mail. My mail server is Ntlworld. I can send mail by going to Safari and loging into my mail account, but i would prefer to continue using Apples mail and my address book. Does anyone know what my problem could be. I haven't altered any settings.

    Why can I suddenly not send out mail using Apples Mail. My mail server is Ntlworld. I can send mail by going to Safari and loging into my mail account, but i would prefer to continue using Apples mail and my address book. Does anyone know what my problem could be. I haven't altered any settings.

  • Curious - why can some see web page and others cannot?

    I've had a couple people tell me that the link that I have provided for my website (a cut and paste of the URL address) doesn't work and the error msg is that the page does not exist.
    Others can view the site just fine.
    I have, until recently, also been able to view my site without issue but I live in China and it is not unusual for there to be sites temporarily blocked from time to time. I have not been able to bring up my site and thought that this was just due to one of these fun times. But the person not able to access the site is in the US.
    So my question is, what other things could bring up an error msg like that? Since it is a cut and past issue, it can't really be a mistyping of the address so looking for any other things that could cause this.
    Thanks!

    Problem sort of solved.
    However, the person who was having difficulty wasn't able to click on the full address URL but when I gave him the shortened version (the version that comes up on iWeb when you are asked if you want to publish it) it was fine. Not really sure why one works and not the other but a solution was at least found.
    Posting this in case anyone else runs into a similar situation.

  • Why can my reciever not see my emoji symbols on the message that I send

    Why can people not see the emoji symbols on my texts that I send

    Are you using the standard emoji keyboard on the iPhone, or are you using some type of 3rd party application? Are the receivers of your message iPhone users? If they are not, it could be their phone cannot decode and display the emoji from the phone.

  • Why can. I not view contacts on webcam

    Why can I not view contacts cam on messenger

    .mp4 and .m4v are 'containers' and while they may well contain AppleTv compatible 'codecs' this is not necessarily the case.
    Also even if a file plays in iTunes it will not necessarily play on AppleTV.
    There is an app which will interrogate your files to give the codec info - the name escapes me currently - hopefully someone else will remember or I will!
    On your AppleTV have you checked that these files are not appearing under the Home Videos category.
    You could also potentially download the Handbrake transcoder and run the files through it using an AppleTV preset.

  • Why are some (but not all) of my Muse slideshow widget images rotated differently than when I edited them in Photoshop CC?

    I have a few dozen photographs embedded in the slideshow widget. Most of them appear exactly as I edited them in Photoshop, but several appear rotated clockwise 90 or 180 degrees. Does anyone know why this is happening, and ideally, how I can correct this problem? Thank you.

    Please share the site url , also refer to this post and check if this helps :
    Why are some of my images importing upside down?
    Secondly , if you change the fill type then does that makes difference ?
    Thanks,
    Sanjit

  • [SOLVED]Can Some Processes Not Run In Background

    Hi,
    Can some process just not run in the background? I have an irc bot and I want irssi to continue running even after I exit. I do
    $irssi
    ctrl-z
    bg
    But after bg it says
    [1] irssi &
    [1] irssi STOPPED
    I've also tried sending the kill CONT signal but it just always stops. Is there another way I should do it for this type of process? Thanks!
    Last edited by Prototype (2014-02-09 03:42:08)

    karol wrote:If you're asking how to background irssi, read http://www.hants.lug.org.uk/wiki/LinuxHints/Screen http://tmux.sourceforge.net/
    Is there no way to run irssi in the background (disowned) with just the built in bash commands? My main goal is to have it running (with me logged into servers) when I exit the terminal.
    Last edited by Prototype (2014-02-09 03:26:24)

  • WHY can my itunes not be connected?

    why can I not connect the itunes store?

    Hey Stuardli,
    You'll want to follow the troubleshooting steps in the following article, specifically the "Troubleshooting on an iPhone, iPad, or iPod touch" section:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Regards,
    Delgadoh

Maybe you are looking for