Why can't FaceTime open on my Mac os x snow leopard? I just bought it and installed it.

I just boulgt FaceTime from the App store but it cannot open. I don't know what else to do.... does it work only for Lion? I have a Snow Leopard..

Facetime works on Snow Leopard.  But the specs say you need to be at least 10.6.6.
If you are on 10.6.6 or later, what happens when you try running Facetime?  Do you see any error messges?  Have you tried rebooting your Mac?  (Not sleep, but shut down or restart.)  Rebooting often "fixes" many issues.

Similar Messages

  • Can I import iWork from my Mac, which has Snow Leopard, to my MacBook Air, which has Mountain Lion?

    Can I import iWork from my Mac, which has Snow Leopard, to my MacBook Air, which has Mountain Lion?
    I would appreciate any advice on the intricacies of operating with Snow Leopard on my main computer and Mountain Lion on my MacBook Air.

    I'm not sure there are any intricacies except you can't use iCloud to keep the two things synced. It would be mostly contacts, Safari bookmarks, Calendars, notes, etc.
    Also, iCloud allows saving iWork documents in the Cloud, so you can access them on both systems. That would not be available for the old Mac.
    The two OSes are similar enough that it wouldn't be too difficult to work between the two, but there will be differences in using the Finder (contextual menu changes)
    I thought I would have more, but I've been off Snow Leopard for so long now, I'll leave this for someone who is currently operating like that or recently switch to Mountain Lion from SL.

  • How can I find out if my mac mini running snow leopard can be upgraded to mountain lion?

    I have a mac mini with sufficient ram for the mountain lion OS however, I am unable to determine if the machine was created in early 2009.  Is there a way to make sure my machine will take the upgrade without purchasing the operating system first?

    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • TS4185 i am using the same apple id for facetime in my iphone and mac. now, only my iphone can receive and make facetime calls. why can't facetime calls in my mac get through?

    i am using one apple id for facetime in my iphone and mac. my phone is able to receive and make calls while my mac is not able to do both. what is the problem.

    thanks.  your answer was correct, clearer.  I have another question, maybe you can answer.  I just purchase my ipad2 2 days ago.  yesterday, there was a sound.  today there is no sound.  there is a sound only in movies and you tube and music.  but no sound on all apps and keyboards.  I look it up and seems like ther are few that have this problem.  I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that.  I tried rebooting it and still won't work.  Should I just restore it?

  • Why can't I open links in a new tab with a right click anymore? And why has the toolbar removed the refresh button?

    Several basic functions seem to be have vanished from Firefox. I can no longer open links in new tabs with a right click, and the refresh browser button (and back/forward navigation buttons, etc) do not appear in with consistency anymore. How do I get these basic navigational tools back? (most recent updates are installed)
    == This happened ==
    Not sure how often
    == 7 July 2010

    * Make sure that you have the "Navigation Toolbar" and the "Bookmarks Toolbar" visible: "View > Toolbars"
    * If items are missing then see if you can find them in the "View > Toolbars > Customize" window
    * If you see the item in the Customize window then drag it back from the Customize window to one of the toolbars.
    * If, in "View > Toolbars > Customize", you do not see that item then click the "Restore Default Set" button
    See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
    See http://kb.mozillazine.org/Toolbar_customization

  • Why does Indesign CS4 stall on my Mac Pro with Snow Leopard as soon as I load a file?

    I recently bought a Mac Pro (operating system: Snow Leopard) and installed the latest versions of Photoshop and InDesign (both CS4). I also installed those programmes on my older MacBook Pro with the former (Leopard) operating system.
    Photoshop works just fine on the Mac Pro, with the machine's new Snow Leopard operating system. However, there is a problem with InDesign. Everytime I open a file, even opening a new file, the programme is stalling and I have to force-stop it.
    Does anyone out there in the Adobe Community have a similar problem and could suggest a solution?
    Looking thankfully forward to interesting replies!  Emil

    I first installed the next to last version; the problem appeared there
    (programme stalling as soon as a document is opened). I then updated to
    6.04, hoping for a solution, but the problem remained unresolved. I still
    cannot open a document without stalling InDesign. When installing InDesign
    in my MacBook Pro (which runs Leopard), the problem does not arise. I am
    able to open documents there and work as usual. The operative system was
    installed by the supplier of the machine. Since I was not able to access it
    (Password issues), I reinstalled it by booting the MacPro from the disquette
    that was delivered together with the machine.
    HELP! I am getting desparate!

  • TS1394 Can't re-install Leopard.  Trying to reinstall the OS because computer locks up.  It is a 2008 iMac that came with Leopard.  Upgraded to Snow Leopard.  Tried to archive and install from original DVD that came with iMac.  Installation failed, so tri

    Computer locks up, so I want to reinstall the OS. I had upgraded to Snow Leopard. 
    Tried to do an archive and install from the DVD that came with the computer, but that failed. 
    Tried to do an erase and install, but the install stops somewhere near the end, 13 minutes to go. Tried several times, same result.
    Can't reboot from the install disk, it just ejects the disk and I get the flashing question mark.
    Any suggestions will be appreciated.

    I think my hard drive is toast.  When I boot in single user mode, I get the following text:
    CSRHID Transition Driver: start booting in single user... will wait for window server
    Then the following text appears, repeating itself over and over, except that the numbers (indicated by "xxxxxxx")
    SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
    SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
    disk1s3: I/O error.
    0[level 3] [READUID 0] [Facility com.apple.system.fs] [ErrType IO] [Err No 51] [IDType READ] [PB1kNum xxxxxxxxx] [LB1kNum 0] [FSLogMsgID xxxxxxx] [FSLogMsgOrder First]
    0[Level 3] [READUID 0] [Facility com.apple.system.fs] [FSLogMsgID xxxxxxxxxx] [FSLogMsgOrder Last]
    These messages keep repeating with the numbers (xxxxxxxxx) changing with each iteration.
    Does this indicate a bad hard drive?
    Thanks.

  • Why can I not open a new tab using the New Tab button, going to File and clicking on New Tab or by pressing ctrl + T?

    I am able to right click on a link and choose "Open in a New Tab."

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    Your system details show that toolbar in the user agent as AskTbGLSV5/3.12.2.16749
    See:
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Why can't I open a pdf file on my desktop?  I keep getting this message: Adobe Reader could not open '8pdk_96_4.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and w

    Why can't I open a pdf file on my desktop?  I have Adobe Reader and running OS 10.10.1  I keep getting the same message: "Adobe Reader could not open '8pdk_96_4.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."

    I tried that.
    I saved the file 8pdk_96_4.pdf to my desktop and tried to open it using Adobe Reader but I get the same message: Adobe Reader could not open '8pdk_96_4.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

  • Why can't I open my presentation having download the new keynote app for iPad

    Why can't I open my presentation having download the new keynote app for iPad

    With everyone and their iDogs trying to update at the same time, things are gonna be a bit bumpy off the bat trying to update and/or activate.

  • Why can't i open photoshop on a second computer?

    Why can't i open photoshop on a second computer?
    the main computer is off and no program is active, but I can't open photoshop on my other computer!

    Hi Gavin,
    Can you please share more information about your issue. Your operating system, exact error message what you get and the screenshot if possible.
    Thanks,
    Ratandeep Arora

  • HT5457 Why can I not open Passbook on my iPhone4?

    Why can I not open Passbook on my iPhone4?

    Vanessa,
    You need to have Application manager installed.
    Beyond that, I believe this is one for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
    http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
    or for this specialized forum,
    http://forums.adobe.com/community/download_install_setup

  • HT2513 What version of iCal do I need to use with Mac OS X Snow Leopard?  I upgraded to OS X 10.6.3 and my iCal 3.0.8 won't open.

    I just upgraded to Mac OS X Snow Leopard version 10.6.3 and now my iCal 3.0.8 won't open at all.  What version do I need to or should I upgrade to and where do I find it? 

    The version installed with Snow Leopard since iCal is part of OS X. If you are trying to use iCal from a different drive and version of OS X, then it won't work. If the installed version of iCal in Snow Leopard is the wrong version, then there was a problem. Delete the wrong version then reinstall Snow Leopard:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • I cannot install mac os x snow leopard as i dont have the previous installation disk os x 10.5.8 and I cant remember the password for the mac. How can I install snow leopard.

    Hi I have just received Mac OS X Snow leopard but when I tried to install it i couldn't as I have forgotten the password for the mac and I can't find the disk for OS X 10.5.8 its running on. Is there any way to install the new software without both of these?

    you can reset your password. restart, and hold down Command-s before the apple logo appears (when the screen is white). you will see scrolling scripts until you see something like "root:" then type /sbin/mount -uw / to mount the disk. after that, type sudo passwd admin or whatever your admin password is. type in the new password two times. it doesn't show what you typed when you type the password so make sure you are pressing the right keys. after you done that, type exit to start up the computer. now you will be able to login with the new password.

  • Uploaded Mac OS X Snow Leopard onto Macbook Pro and now iTunes wont iPhone

    Can someone pls help!
    I have recently uploaded Mac OS X Snow Leopard onto my Macbook pro and now iTunes won't recognise my iPhone. It does however recognise my iPhone in iphoto.... does anyone know how to resolve this???
    I'M IN DESPERATE NEED FOR NEW MUSIC ON MY iPHONE!!!!!!!

    Try reinstalling itunes. DL from:
    http://www.apple.com/itunes/download/
    Also have a look at this:
    http://support.apple.com/kb/TS1591?viewlocale=en_US

Maybe you are looking for

  • Would like to see some great symbian stuff in Lumi...

    All fellow Nokia fans, I switched to Lumia 920 from dependable Nokia E7. I miss some great features available in E7. If nokia is listening, please do something to include following features in Lumia 920. 1. Synchronize map favrourites from OVI to Nok

  • All email accounts disappeared

    I have a bunch of email accounts on my Mac Mail. I had just sent off one, looked away, and all of a sudden all of my accounts disappeared! I kept looking for a way to open them - but nothing. And then I tried to reboot. As I was closing it down I got

  • Updating of Frieght Data in custom Report

    Hi All, I am having an issue in Transaction VA01, in this Transaction in Pricing Tab when ever user changes the pricing value in the Condition Type PR000 we are having a custom report to display the change data PRHL AND USERAPPROVED the report is wor

  • How to install multiple language version of photoshop within creative cloud?

    How to install multiple language version of photoshop within creative cloud?

  • With Flash Catalyst - sizing issue with artboard

    i have created an artboard along with all my images etc. 900 x 300 all my images sit outside these boarders, when i check to see how my project is working part of the images to the right of the artboard come up in plain view.  I have checked my artbo