Why Can't I Add Buttons To The Browser?

I deleted the "Medium Icon" button in the Browser and realised I needed it back.
So I right-clicked to open the button menu and chose the medium icon from the "Display" section.
There was no way I could get it (or any other button) into the browser. As I got the button over the browser it had a little x by the side of it. However, when I moved the button anywhere near the other windows they were only too willing to open up to accept it!
The only way I could get the medium icon button into the browser was to restore the defaults.
Why couldn't I get the browser to accept buttons?
Ian.

Thanks Tom but it wasn't the preferences this time.
I've just been away from the computer for a couple of hours and after reading your reply, I suddenly had an idea!
The Browser had been set to its narrowest width to accommodate a large Viewer and Canvas.
All I had to do was stretch it out wider and it accepted the buttons willingly.
What caught me out originally was that I was able to delete existing buttons but not replace them. You would think that if there was space for them to exist, there would be space to replace any that were subsequently deleted.
Strangely enough the narrow Browser would still accept extra buttons when asked to restore the defaults.
Ian.

Similar Messages

Why can't I add text in the signature panel in firefox?

why can't I add text in the signature panel in firefox? I have adobe acrobat pro XI. I can open a pdf in acrobat pro and am able to add text to a pdf, but when I open a pdf in firefox, the "add text" option is not available.

When you install Acrobat XI you are also installing Reader for use in the browser. Reader is "sandboxed", or as it says in the Preferences, it is in "Protected Mode". Acrobat does not understand the concept of running in sandboxed memory (sandbox is a security feature to prevent the bad guy from exploiting a memory error and getting into a memory address where they can do damage to your computer) so to help protect Acrobat users the same way Reader users are protected we just install Reader along with Acrobat, but it is only used in the browser (part of this is because the bad guys use web sites as their primary method of distributing corrupted PDF files that can cause problems).
That said, because you are in Reader the file needs to be Reader Enabled prior to being posted to the web site (or opened in the browser). Once the file is Reader Enabled you should be able to add the text annotations.
Steve

Why can't I add appointments to the calendar anymore? I can add to my iPad and they show up and sync with iPhone but I can't add appointments directly to the iPhone calendar.

Why can't I add appointments to the calendar anymore? I can add to my iPad and they show up and sync with iPhone but I can't add appointments directly to the iPhone calendar. I am on the latest OS version available for iPhone 5s.

Hi,
You cannot manually manage music with match turned on on your iOS device. If you want to manage music manually, you will need to turn off match on your iPhone.
Jim

Why can't I add artboards using the New Artboard button in the Artboards panel?

I cannot add artboards using the New Artboard button in the Artboards panel; I can only draw additional artboards with the artboard tool. I was able to create additional artboards earlier using the button in the panel, but suddenly (in one file) it stopped working and it displays the message "Cannot create artboard outside the canvas", even though I'm not attempting to create the artboards outside the canvas. I only ever had four artboards in the file. I deleted three of them, and now I can't even create a second artboard using the button. Even though I can use the artboard tool to create more artboards, my preference 99% of the time is to use the button in the panel. If I start a new file, the button allows me to create up to eight artboards. After the eighth, it then displays the "Cannot create..." message. But in the new file, I can delete the additional seven artboards and then add them back using the button. So I'm not sure what's preventing me from creating additional artboards using the button in my current file. Any help is appreciated! Thank you!

put the existing artboards to a location in the file where there's enough space to the right and down.

Why can't we add programs to the list of right-click "open with" in Bridge?

I've followed various discussions and can find no official solution, nor any easy-to-follow solution for this issue.
What is the point of having bridge if we are unable to right click from bridge and open any image in any of the CC programs.
Am I missing something here?
also, I was fairly convinced that I could do this the last time I used bridge, last week, and now I can't.
I have used the "update cloud" today.

What is the point of having bridge if we are unable to right click from bridge and open any image in any of the CC programs.
Am I missing something here?
Maybe you can specify a bit more of your problem?
In basic, having a correct install automatically adds all CC applications to the list above the line and most of the non adobe applications under the line.
You can add a new default using Bridge Preferences File type associations and if this is not in the list at the bottom of the pop up menu is a browse button to search your disk.
But you simple can't open any image in any Adobe application because not all adobe CC apps support all file types or can't even view images.
The Open Width list also varies per file type. For instance a Raw or DNG file gives you only the CC - applications with a Raw converter and that narrows it down to PS.
A .mov file only provides After Effects and Premiere Pro etc etc.
And you have to option to place all kinds of files in ID, AI, Ps etc. using the right mouse click menu.
If your behavior differs then first start refreshing preferences as a start.

Why can't I add certificates to the default firefox profile?

I am using the NSS certutil to add a certificate to users profiles on OS X (10.8-10) running Firefox ESR 31.4.
There is no problem adding the cert to existing users profiles, however I want to add it so that new users who log in will automatically have the cert installed.
As I understand it, I should be able to install the cert to a default profile in the application that will then go out to new users when they run FF for the first time, however this has not been the case in my testing. I have been running the cert util, as root, on the directory '/Applications/Firefox.app/Contents/MacOS/browser/defaults/profile'.
The command ('/opt/local/bin/nss-certutil -A -i mycert.cer -n "My Cert" -t "C,," -d "/Applications/Firefox.app/Contents/MacOS/defaults/profile"') runs without error and places three files in there: cert8.db, key3.db, secmod.db
When i log in as a new user on the system however, they do not have the cert. What am I missing?

Turns out it was a permissions issue, the files created by the certutil in the defaults folder got root only permissions given to them. I opened them up and it's working fine.

I just installed itunes 11.1.5.5. Now the format in Itunes is changed. when I am trying to add music to my iphone, there is no longer an add button under the Iphone device. Why did they have to change this? Can anyone help, Im tryiong to add music.

How do you add musci to the Iphone? I just installed itunes 11.1.5.5. Now the format in Itunes is changed. when I am trying to add music to my iphone, there is no longer an add button under the Iphone device. Why did they have to change this? Can anyone help, Im tryiong to add music.

Correct. When you purchase devices, they would have stated the OS they needed to work, on the box. This can be overlooked, but it is very important to check when purchasing.
You current OS, is so old, that they technology build into the new devices, is not something your OS understands. It didn't exist when your OS was created, and therefore you need to upgrade the OS to work with the newer technology of these devices.
10.6 software is not downloadable. You must purchase a DVD disc. You can order it from the on-line apple store
- http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard.

HT201087 Why can't I add a location to a photo in the new Photos app? Apple appears to have taken away a feature without asking.

Why can't I add a location to a photo in the new Photos app? Apple appears to have taken away a feature without asking.

I have an iPhone and occasionally use it for photos, but my main camera is NOT an iPhone. To be forced to go outside Apple for a product when Apple had perfectly good products available is ludicrous. But it is what it is, apparently.

Why can't I add playlist on my old iPhone iTunes on my computer? Can add it on my phone manually but I need to do it on the computer..

Why can't I add playlist on my old iPhone iTunes on my computer? Can add it on my phone manually but I need to do it on the computer.
This is an old iPhone that I am only using as an Ipod. It is an Iphone 3GS and I now have an iPhone 4S.
Any help would be much appreciated!

I assume that you mean that you do have an iPhone because messages will not work with any other type of cell phone. You should be able to add your phone number in Settings>Messages>Send & Receive at>You can be reached by iMessages at, if your phone number is lited in there, select it and then uncheck your email address and then the iPad will be using the phone number just like the iPhone.
If you phone number is not listed in there, you probably have to sign out/turn off Messages on the phone and the iPad and then start over again on the phone - and then your phone number should be accessible to use on the iPad.
Read this support article and pay attention to the information at the very end.
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538

I am trying to download the lastest apple ios update to my PC so I can update my ipad 2. Why are there no download buttons on the latest software updates?

I am trying to download the lastest apple ios update to my PC so I can update my ipad 2. Why are there no download buttons on the latest software updates?

Make sure all contents are transferred and device is backed up before you update.
Transfer purchases
http://support.apple.com/kb/HT1848
How to backup
http://support.apple.com/kb/HT1766

Why can't Adobe add the feature of viewing focus points? This is an obvious, common sense feature that Adobe Engineers must understrand how to do, No?

Why can't Adobe add the feature of viewing focus points? This is an obvious, common sense feature that Adobe Engineers must understrand how to do, No?
I've seen this requested in several past Lightroom versions.
Is Adobe not addressing this basic feature for a reason?, I mean, even Aperture has this feature, it can't be that hard to add? Can it?
Maybe Adobe isn't reading the feature request?

Honestly, I am hardly qualified to even guess - there are tons of bugs reported that would be easy to fix, but aren't, features that would be useful and easy enough to implement, but aren't. Things like focus points which seem like a no brainer but are never implemented - your guess is as good as mine..
But to be clear: focus points are different for different cameras, and are stored in proprietary metadata. - not impossible to get at, obviously, but requires some programming/maintenance..
Worth noting: Apple is shutting down their Aperture business. Yeah, they support focus points and all kinds of good stuff, but I guess Aperture isn't a real money-maker for them (lotsa maintenance work, but not a lot of revenue) - relatively small market.
Adobe has been working on Revel, and Lightroom Mobile.., instead of focus points (and bug fixes, and...) - my guess: that's where the money is, or where they think it is.
Cheers,
Rob

Why can I not add the audiobooks I purchased from itunes to my ipod

Why can I not add the audiobooks I purchased from itunes to my ipod. My ipod is 60 gb version 1.3. I think a 5th generation

Kristy,
Is your iPod configured to sync audiobooks? To check, plug your iPod in and when it appears in iTunes locate it's audibooks tab and make sure it is set to them.
B-rock

Why can't I add narration now ?

I have added narration in the past on previous versions of Premiere elements and on Pre 10 but in the last 2 weeks I get an error when I click on the red record button I get a error message that my audio hardware selection does not have any input channels and I should go to Preferences, Audio Hardware to correct this.
I go to Preferences Audio hardware and and it shows Premiere elements WDM Sound and next box has ASIO setting. I click on these and I see no other possibilities or choices.
I still have Pre 8 loaded and the narration will not work now on it with the same error.
What could cause this after narration has always worked in the past?

Bill I believe I have answered your questions If not get
back to me and I will try. I am a Snowbird in a motorhome traveling in AZ. And
the internet comes and goes from time to time. And being a senior my computer
skills leave me at a disadvantage. I really appreciate you trying to help me.
Thank You
Ralph
Computer Lenova Ideapad Y-530 Windows 7 64 bit
Processors: Intel ® Core 2 DUO CPU T5900@ 2.20 GHz
Intel® Core 2 DUO CPU T5900@ 2.20 GHz
Chip set Mobile Intel 4 series chipset Processor To Dram
controller 2A40
All drivers have been updated and rechecked for updates
today all were current.
When in project and I click (Edit, Preferences, Audio
Hardware) The box opens with Default device shown as Premiere Elements WDM
sound. Then when I click ASIO settings a new window opens showing Logitech H
150 as default device.( Left Panel 3.5 MM External Jack) I also use this in Skype for phone calls and
also tried it in Windows Movie Maker and it works OK.
In the ASIO box there is 3 other choices:
Speakers (High definition Audio Device)
Digital Audio (S/PDIF) (High definition Audio Device)
Laptop internal (High definition Audio Device)
I Have tried all 4 devices with the same results
When in project and clicking on Audio, Add narration, the (Record
voice narration) window pops up and when I clink the microphone box to choose
mic the box lights up but no choices show.
In Control Panel, device mgr I do not see the Logitech h 150 listed
Narration was working till about 2 weeks ago. I do not
believe I have changed anything.
A bout 3 days ago I uninstalled Premiere el 10 and Photoshop El 10 and reinstalled both, I thought that may help but no change
Date: Fri, 10 Feb 2012 10:37:01 -0700
From: [email protected]
To: [email protected]
Subject: Why can't I add narration now ?
    Re: Why can't I add narration now ?
    created by Bill Hunt in Premiere Elements - View the full discussion
Welcome to the forum. What is the make/model of your mic.? What is the connection type? What is the make/model of your sound card/chip? Do you have the latest driver for that sound card/chip installed? In a program, like Windows Recorder, does the mic. work fine? In Control Panel>System>Hardware>Device Manager, does your mic. show up with no errors, or warnings? What is the ASIO setting now? Good luck, and please let us know a bit more. Hunt
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4198766#4198766
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4198766#4198766. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT201386 Why can't I add a title to a photo anymore?

Why can't I add a title to a photo anymore in Iphoto editing?
Thanks,
Lpkaufman

For a transition to work, you need handles... basically, enough footage to overlap each other so that the transition can grab from both sides... your clip is merely 7 frames, way too short to be able to add a transition...
I've used the "joining two pieces of fabric" analogy before, but I think it was too girly.. Perhaps another way to think about it, is to think of a "dovetail joint" used in wood working... the two pieces of wood need to grab onto each other in order to hold together...
Anyhow, doing a quick search to perhaps better explain, I found this:
http://multimedia.journalism.berkeley.edu/tutorials/finalcut/transitions-handles /

Add button to the transaction SM30

HI
Whether it is possible to add a buton to application tool bar in the transaction SM30.
help reg this.

Hi,
Yes, it is possible to add button for the transaction SM30.
This is possible through Menu exit.
Procedure for Menuexit:-
Go to SM30 ->System -> Status
Repository data -> Transaction -> Double click on it
Copy package name
Go to SMOD
Press F4 then a popup will open
Click on information system
Enter package name and press Enter
Then we will get Exit
Put cursor on that exit and press Enter
Go to change mode and save it.
Go to CMOD or alternatively we can use the path tools -> ABAP/4 Workbench -> Utilities -> Enhancements ->Project Management
Specify Project name in the enhancement text box
Click on Create icon on the application toolbar.
Enter description for the project and save it
Click on Enhancement Assignment button on the application toolbar
Give Exit and save it
Go to Components on the application toolbar
Double Click on MENUS001
Write function text which we want to add to menu item and save it with an request number
Double Click on Exit and write code there to display menu item in the screen
Activate the include program and finally activate the project.
Please reward points if helpful.

Why Can't I Add Buttons To The Browser?

Similar Messages

Maybe you are looking for