Why can't I apply a cross dissolve between an after effects comp and black video in Premiere CS6

I imported a 20 second composition from AE CS6 into Premiere Pro CS6 and would like to apply a cross dissolve transition between it and the media on either end of the AE clip. However, every time I try to apply the cross dissolve, it only gets applied to the AE clip. I can't apply any transitions that straddle the AE composition and anything else. For example, I have a 5 second black video before the comp and a jpg graphic after the comp. I have tried to apply a cross dissolve to both ends, but the cross dissovle only gets placed on the AE comp no matter how I try to apply it.
Any suggestions would be greatly appreciated.

When you playback the Timeline, with the Cross-Dissolve applied to the AE Comp (on both ends), how do the Transitions playback?
For more info on Handles, this article might be helpful: http://forums.adobe.com/message/3727485#3727485
Good luck,
Hunt

Similar Messages

  • Why can't I download apps bought by family members after installing ios8 and creating family sharing on my iPad mini

    WWhy can't I download apps that family member bought on her iPad after we downloaded ios8 and  became family members I'm able to download mine onto her iPad but I can't load hers onto mine

    I have captured the install log.  Right now I don't have the Sever.app and related files in the system.  But log shows the server is running or installed today.  I have seen MiniLauncher tag (don't know what it is).  And if the server is running, it is not appearing in the Activity log.

  • Premiere Pro CS 5.5 can't do a simple cross dissolve with MPE enabled?

    When adding cross dissolves to a project that I'm working on, I've come across an odd problem. I say odd because this should be dirt simple, but Adobe seems to have messed this up. Please advise on any solution or work around, or perhaps simply see if you can recreate the issue so we can get Adobe to fix this.
    Problem:
    Cross dissolves transitions don't seem to work consistently in cs 5.5. Note: I know how transitions work, and I'm not doing something stupid like trying to apply a transition to a cut without actually removing any video between the two clips (assuming the clips came from the same source video.). I'm able to recreate this issue on two different systems with premiere pro cs 5.5 by doing the follwing:
    Create a new project and and sequence with the default settings.
    Enable the Mercury Playback Engine if it isn't already enabled.
    I import the Wildlife.wmv video that comes default with Windows 7 systems.
    Drop it the video into the sequence.
    Ripple delete about a 2 second section of the video. be sure to do this in the first half of the video, and make sure the the video changes the scene during this period so that you will notice the cross dissolve transition when it is applied.
    Apply the default cross dissolve transition to the edit.
    Review the edit. For my test, this edit always seems to work fine.
    This is a screen capture of the working cross dissolve transition.
    Now let me show you what happens when I do a similar edit somewhere in the second half of the video clip.
    As you can see, for the duration of the transition, only the clip to the left is shown. At the end of the transition effect the program out preview jumps to displaying the clip to the right. There is no transition.
    Additional notes:
    This second transition works fine with MPE disabled, but because if of my other problem http://forums.adobe.com/message/3725642 that I have with MPE disable it is not a viable work around.
    Help?
    -Ted

    I too am experiencing this issue.  AVCHD footage, GPU Acceleration, trying to apply a cross dissolve, and instead it randomly seems to see it as a simple cut.  The Cross Dissolve is simply ignored... Adjusting the footage length, removing the CDissolve, re-rendering, etc. have no effect.  For whatever reason, in that specific location on the timeline, a cross dissolve with GPU acceleration is impossible.  Yet, in other sections of the timeline, it is just fine.
    (The Fast Blur trick mentioned above worked (Thank you!) however, when I changed my playback resolution on the screen display, that broke the fix.  Deleting the fast blur, and applying it to the clip on the other side of the cross dissolve, re-enabled the work around)
    I also see an issue when a clip changes in the timeline, (cut from one piece of footage, to another) the video will begin to studder, dropping frames.  Framerate seems to drop to about 2fps.  To get smooth playback back, I have to pause and resume the playback.  Even if this is done very very rapidly, it still fixes the playback issue.  it's just really annoying to have to constantly stop and resume playback everytime a video clip changes in the timeline.
    I have a dedicated hard drive for video, and a dedicated mirrored array for the OS.  the video drive is a 7200rpm SATAII drive, and I'm using AVCHD footage.  I really don't think it's a disk speed issue... particularly as pausing and resuming (even if you do it as fast as you can possibly hit the keys) fixes it.  I'd rather not spend the $ to set up a RAID 10 for video, if I can avoid it and particularly if it's not needed.
    -Jason

  • I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

    I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

    Checked out that link and everything seems to be in order on this machine at this time.
    I only have CC installed on this one machine, not even my secondary machine like is permitted. it seems odd that I'm asked to re-accept the Licence Agreement as often as I am. If I had to guess, it's almost every week, if not multiple times some weeks, that all the software will decide I should have to view the licence agreement.
    Edit: I've never had any noticeable "errors" activating or anything like that. I just get asked to do it quite frequently.
    This activation screen isn't too annoying (it involves clicking one single button), but like I stated earlier, if I'm trying to launch the software by double-clicking on a PSD, AI, PPROJ, AEP, etc... that file will fail to open.
    I feel like that's probably not really a bug, but it is frustrating, since I did launch the application with the intent to edit that specific file I tried to open.
    Again, something that you guys may consider working on.
    Another annoyance is that: agreeing to the licence agreement is a per-application task, so if I see that Licence Agreement dialogue window by opening Photoshop (for example), I know that every other piece of software I have in the suite (Illustrator, Premiere, After Effects, Audition) will be showing me that screen on it's next launch. Probably deliberate for legal purposes that I can't just agree once for the whole suite, but heck, it would save me a lot of minor headaches if it was a unified agreement.

  • Why can't I apply the 2.9 firmware update to my 2012 MBP, running 10.8.2?

    why can't I apply the 2.9 firmware update to my 2012 MBP 9,1 running 10.8.2?

    What happens, exactly? What firmware version do you now have installed?

  • Can't apply transitions to After Effects comps in Premiere Pro

    Hi people, newbie Premiere user here (my boss is trying to convert me from FCS) :-)  I downloaded the trial version of CS5 and want to learn as much as I can before my initial 30 days is up.  My initial experience has been pleasant, but I've come up against an obsticle I could sure use some help with.
    1)     Creating my timeline with serveral clips
    2)     Exporting certain clips to After Effects; 'Replace with After Effects composition'
    3)     Adding my effects
    4)     Back in Premiere Pro my clip is replaced by the comp.
    5)     Try to apply a simple cross-dissolve across 'Comp 01/Comp 02'
    PROBLEM!
    Seems the transition will only snap to the start of the second comp.  With clips I can drag & drop the effect to span the clips and get perfect results, but not on an After Effects comp.
    6)     In Premiere Pro 'Effect controls' change parameter so that the transition centre is at 'cut'
    The result indeed spans the clips, but the effect quality is terrible - decent fade from comp 01 to a sudden dip to black before fade-up on comp 02.
    Yes, I understand the 'Layers' concept, but I'm not asking the software to do anything nonsensical, just a simple cross-fade across 2 comps.
    I really would appreciate any advice anyone can offer, I'd really like to be converted (mainly because if I AM my boss has promised to buy me a licence when my 30 days are up!) :-)
    All the best
    Steve

    To expand a bit on Colin's comments, back in the film days, the concept of Handles was easy to grasp, as the pieces of film were on an A and a B Roll, and the editor had to physically overlap them by the desired amount, so that the lab could print with a Dissolve. The same held for the days of A-B Roll digital editing, where the Clips were again physically overlapped on separate Tracks. Then, digital editors were developed that allowed one to edit with the Clips on a single Track, and where Transitions were applied between them. The Handles were necessary still, but were no longer visually obvious.
    These images will tell you a bit more about the concept:
    Hope that this helps,
    Hunt

  • Why can't I connect to the Internet on my Adobe Reader? And why do websites tell me I don't have Adobe downloaded when I have an updated version on my computer? It is an IPad,does that affect it?

    Why can't I connect to the Internet on my Adobe Reader? And why do websites tell me I don't have Adobe downloaded when I have an updated version on my computer? It is an IPad,does that affect it?

    Also, download and open the free Adobe Reader app. Then read the Help section to figure out how to use it.

  • Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

    Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

    3-D is very memory intensive.
    System requirements | Photoshop
    Mac OS
    Multicore Intel processor with 64-bit support
    Mac OS X v10.7, v10.8, or v10.9
    2 GB of RAM (8 GB recommended)
    3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
    1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
    OpenGL 2.0–capable system
    Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
    ** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
    Bottom line, you don't have enough VRAM
    Nancy O.

  • Why can I no longer use my headphones remote to fast forward or rewind music videos on iPhone since upgrading to ios7?

    Why can I no longer use my headphones remote to fast forward or rewind music videos on iPhone since upgrading to ios7?

    The YouTube app is not included in iOS 6 (I think because the licensing agreement with google ended). You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google, and other people have said that they are working on an iPad version), or (if this isn't the version that you have tried) try accessing the mobile version via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

  • Why can't i log in my iTunes account? My wifi works and when I log in my iTunes it says "cannot connect to iTunes Store"

    Why can't i log in my iTunes account? My wifi works and when I log in my iTunes it says "cannot connect to iTunes Store"

    You may not be connected to the internet. Does Safari connect?
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can’t connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • HT3775 why can't i play .wmv file in quicktime even after i download codec from windows? can anyone help me wit this please!!!!!

    why can't i play .wmv file in quicktime even after i download codec from windows? can anyone help me wit this please!!!!!

    Have you done the obvious things to try to fix it: quit Quicktime then start it back up again, log out then back in, reboot.
    Edit: Just read one of your later posts. If VLC won't play it, this is unrelated to Quicktime and Flip4Mac. Are you sure these wmv files are okay?

  • Why Can't I view purchased movies on my Tv using iPad mini and lighting to VGA adoptor

    Why Can't I view purchased movies on my Tv using iPad mini and lighting to VGA adoptor

    There's an issue currently that a lot of us are experiencing in that we all get the error message "iTunes is currently unavailable; please try later"
    It's an issue with Apple and we're awaiting an update re this
    I've posted a topic in regards to this after having a long conversation with Apple support this morning and will be receiving a call from their tech team tomorrow to run through it further
    As it stands iTunes cannot be accessed via ATV's and nor can it be streamed via AirPlay from iTunes to the ATV
    However I can access all films/iCloud content via my Mac Mini with no issues!

  • Why can I not get my iPhone Playlist to match on my iPad and PC. I want my iPhone Playlist to appear on my PC and my iPad.

    Why can I not get my iPhone Playlist to match on my iPad and PC. I want my iPhone Playlist to appear on my PC and my iPad.

    Yes I understand the PC is where everything is maintained and my playlists used to reside there and that is where I created them. However, they are now gone and only appear on my iPhone and I am trying to figure out how to get my Playlists to show back up on my PC so I can manage the songs.

  • Why can't I get my emails. Tells me that my password and or user name is not correct

    Why can't I retrieve my emails.  Won't accept my password and or user name?

    Try Settings > General > Reset > Reset Network Settings.
    Check if there's  e-mail outage with your e-mail provider.

  • Why can't i use wifi on my iphone 4s after i downloaded IOS7

    why can't i use wifi on my iphone 4s after i downloaded IOS7?
    thankful for answer!

    Well, there are probably dozens of possible answers based on the nature of the problem, so a little more information would be useful.
    Is the WiFi switch greyed out? If so, see: http://support.apple.com/kb/TS1559
    Is the problem with only one network? If so, reboot the router by removing all power from it for about 30 seconds. Even if other devices still work on that router (the router and iPhone may have gotten out of sync on the time remaining on the iPhone's IP address lease).
    If the WiFi switch is not greyed out, but the phone doesn't find any networks, go to Settings/General/Reset - Reset network settings.
    If that fails, go to Settings/General/Reset - Reset All settings.
    And if the problem is not described in this message please provide more information.

Maybe you are looking for

  • EFI Update Error

    Hi all, my imac doesn't update; i get "error (0); can't update" i tried 3 times; i tried also downloading update from apple.com, no changes... someone else? Bye, Marco.

  • Need advice on creating ospf abr router

    Hi, I'm studying for the CCNA, and am trying to learn and experiment with OSPF in packet tracer. I am having trouble with setting up a ABR to advertise a summary route for area 0 to another router in area 1. Lets say I have: R1: router ospf 1 network

  • Open a .bbb files with another software than Link to retrieve drafts

    Hello, I have a Blackberry Q10 which is synchronized with an Exchange account for my work email. I did a full backup of the phone via Blackberry Link before making an update. My problem, this shift has removed my drafts that existed only on my phone.

  • Error in Siebel Analytics ReportUI portlet Authentication error.

    Hi Everyone I am trying to Integrate Between Weblogic Portal and OBIEE. Weblogic Portal Version: 10.3 OBIEE : 11g Integration Using: Report UI Portlet 1. While creating OBIEE environment "weblogic" user was setup as "Administrator" account. Following

  • Help with custon tag on Jdev 10g preview

    Hi. someone know how I can use a custon tag with JDev and ADF Faces component or know where I can found information about it. thankz in advantage.