Why can't I continue with activation?

I just restored my Iphone and now it says it can't proceed with activation?

Most likely your phone was previously hacked to carrier unlock. When you restored it was re-locked to its original carrier and will acitivate only with that carrier, using their SIM card.

Similar Messages

I located my ipad but when wipe the data i lost the tracking data is stored? Why can't i continue with find my ipad?

I just discovered that my ipad was stolen. I located it using mobileme and immediately use the wipe data function which immediately cleared the location information or tracking function. Is there a way to use locate my ipad or track it after activated the wipe function?

Sadly, no. Once you choose to wipe your data, it removes ALL of your data. That includes your MobileMe information. You won't be able to track it anymore. But, your data isn't compromised either! For the furture, (but I'm sure you already know) it may be best to send your iPad a message first asking the finder to call a phone number or email an address if found. You can lock your device with a code and give it a few minutes/hours to be returned before you wipe it. Of course, if you know for sure it was stolen then wiping it probably was the safest decision. I'm sorry to hear about your loss and I hope you either find it soon or are able to purchase a new device.

Why can't Adobe continue to support and create updates.....

Why can't Adobe continue to support and create updates for MAC G5 OS X Tiger?
I'm sure I'm not the ONLY owner and operator of this MAC machine. I'm finding it
VERY frustrating how your comany, JAVA and Apple of just written this machine off.
You know, MAYBE I'd be more understanding if this MAC product or ALL MAC
products weren't so reliable. However, like many MAC users out there
there's NOTHING wrong with my machine or my current programs OTHER than the
simple fact I can no longer update Flash player or Java... all because
my machine is no longer supported.
WHY can't updates continue to be made? This way,ALL consumers are happy:
those who feel it wasteful economically and ecologically to
replace a computer with a NEW computer, and those who just like to have the latest
and greatest tech toys.

MD Optofonik wrote:
Dear God in heaven, I can't even simply make a basic edit to correct a spelling mistake.
You can - click on the "Actions" link at bottom left of the post.
As to the rest - nobody seems to like this forum, and what you're saying has been said on numerous occasions already.
It's Adobe's fault for "buying in" this forum (sorry - "Social Business" ) service, but it's Jive's fault for producing such a crappy solution in the first place.

Why can't I continue my sections ?

Hello,
I have a school presentation to acheive, and i have been using Pages.
After about 7 pages on my report, i realized that the software won't let me add more sections. The icon doesn't even seen to be "working" any longer. Why can't i continue my report with the preformated sections ?
Can anyone help ?
Thank you !

Tried saving and restarting?
What version of Pages?
What version of OSX?
What template?
Tried starting a new document? What results?
Peter

HT4972 I tried to update my iPhone 3S with iOS, data was restored but on continue with activation in the iTunes stores, it is replying "We're sorry, we are unable to continue with your activation at this time." what could be the reason?

I tried to update my iPhone 3GS with iOS, data was restored but on continue with activation in the iTunes stores, it is replying "We're sorry, we are unable to continue with your activation at this time." what could be the reason?

Hmm, well... iTunes trys to activate your iPod using the Apple server to make sure you have bought it legit.
Two things come into my mind:
1) Your iTunes can't access the internet.
2) Apples activation servers are down.
That's just my cents, maybe anyone else has an idea.

Why can't I login with my Apple ID when I try to setup Cloud on my MacBook Pro?

Why can't I login with my Apple ID when I try to setup Cloud on my MacBook Pro?
thanks,
Simon

First question that I am not clear on your answer about: Is the Apple ID itself a valid email address, and the same one that you have as your Primary email address on your account? If the actual Apple ID is not an email address, then that is why you are not able to sign on to iCloud or to verify it....it must be an email address.
If it is an email address then:
Update your OS to the latest version - 10.8.5
Once you have updated, reboot the Mac and then go to Preferences>iCloud and try to sign on with your Apple ID again.
Check Manage your Apple ID to make sure that your Apple ID/Primary email address is verified.
If the problem persists, contact iCloud Support to see if they can provide you with an explanation of the meaning of the message. If the Apple ID has already been verified, then I'm not sure why you would be getting this messge:
https://getsupport.apple.com/Issues.action
Cheers and best of luck!
GB

Why can't I text with non Apple equipment?

Why can't I text with non Apple equipment?

You can with third party apps. You just can't use Messages in order to text since it only works with other iOS devices and Macs running Mountain Lion.
https://www.google.com/search?q=texting%20apps%20for%20iPad

Why can't i pay with ideal for my skypenumber? and...

why can't i pay with ideal for my skypenumber? and without notifications up front!
number

Hi ronhermes,
I hope you're having a lovely vacation!
I think it may just be a matter of completing your our purchase through the US Adobe Store (not the Adobe Store in Greece). For more information, see "Are there any workarounds?" in this document.
Best,
Sara

Why can't i login with the account i just created???? I am missing an important session!!!!

why can't i login with the account i just created???? I am missing an important session!!!!

Hello ljp1,
What browser are you using to log in to your brother account? It could be a problem with some settings within your browser that is giving you grief.
Try going through these troubleshooting steps to see if it helps resolve the issue.
http://goo.gl/TTH2s
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Why can't I communicate with both of my GPIB devices?

I have 1 NI PCI GPIB board in my computer
I have 2 identical devices (keithley 237) connected one at address 15 one at address 16
and 2 different programs one program to connect with 15 and 1 to connect with 16
after I tell the 1st labview program to communicate with 15 then I tell the 2nd labview program to communicate with 16. then both communications come back with error device timeout. one at a time, I can communicate find with either device.
Why can't I communicate with two different GPIB devices at the same time?

Hi mrutter,
first I would try some other addresses, e.g. 5 and 11. 15, 16 could be
a special address used by the controller.
Are there any other devices on the GPIB? If so then there could be
another instrument with the same ID. Do both (or all) devices show in
MAX, and can you communicate with them in MAX (e.g. query a *IDN? )
And are you sure that you *have* setup the correct addresses in the
Keithley instruments (look in the manuals if you don't know how to
change their addresses)? Some Keithley instrument are in local mode by
default, and you must explicitely set them in GPIB mode.
Sometimes, GPIB message termination can be an issue (although both the
GPIB cards and the instruments seem to get more tolerant of this).
Also, you must be very careful not to mix different versions of
LabView drivers and LabView version. I once had three different
LabView versions on a PC, it was terrible. We had to format the
harddisk and start afresh since we couldn't remove all of the older
versions.
I first try all GPIB instruments in MAX. If all devices appear there,
and I can query commands in MAX, then I usually write my own LabView
drivers with the standard GPIB-read and -write VIs. I write them with
my oldest LabView version (say 5.1), then I am sure they will work
with all versions up to 7.1
Actually I once had a project where *no* GPIB instrument worked 100%.
We could never really find out what was the problem (it was probably a
bad PC <-> Win98 <-> GPIB card <-> LabView 5.1 constellation).
Good luck.
Johannes
On Fri, 12 Nov 2004 13:49:31 -0600 (CST), "mrutter@contech"
wrote:
>I have 1 NI PCI GPIB board in my computer
>I have 2 identical devices (keithley 237) connected one at address 15
>one at address 16
>and 2 different programs one program to connect with 15 and 1 to
>connect with 16
>after I tell the 1st labview program to communicate with 15 then I
>tell the 2nd labview program to communicate with 16. then both
>communications come back with error device timeout. one at a time, I
>can communicate find with either device.
>
>Why can't I communicate with two different GPIB devices at the same
>time?

Ill.CS3 - Why can I only work with one sheet on the desktop? I want to design a multi page document...

ill.CS3 - Why can I only work with one sheet on the desktop? I want to design a multi page document...

Use this ancient work-around:
Create mutli-page PDF | Illustrator

Why can't i export with OR without taking language into consideration ?

Why can't i export with OR without taking language into consideration ?
I'm from Denmark and I need it just to convert into TXT with OCR with out looking af the language.

You can't do OCR without knowledge of the language, because a crucial part of OCR is spell checking to test the possible text extraction. Well, you could try claiming the language is English, but the result may be unhappy.

Why can i not connect with my wi fi?

why can i not connect with my wi fi?

look at this http://support.apple.com/kb/TS1398

Why can't I print with an HP and a mac using PSE9

Why can't I print using an HP printer and a mac with Mountain Lion and PSE9

HP printers tend to have long names. Try renaming your printer to something more simple.
Click on System Preferences in the dock or from the menu after clicking the apple icon (top left)
Under Hardware choose Print & Scan
Right-click or Ctrl+Click on your HP Printer and choose rename printer
Type a new name e.g. My Printer (you can also add a location if you wish)
Then click OK

Why can't I work with ColdFusion documents?

Um... just updated and went to open some ColdFusion files I normally work with but can't open them at all. They are grayed out. And there is no longer a ColdFusion option in the "New" panel. And in preferences you cannot select ColdFusion as the default document type.
Did I just miss where it is?

I sincerely hope that someone can offer me a solution to this latest (and quite frankly greatest hiccup in the world of coldfusion for me). I NEVER post on blogs, forums or otherwise as I can usually find what I need to know if I look around but this is not the case. I was anxiously awaiting the new cc for dreamweaver since the purported tools that would make my development much more integrated with the latest methods only to discover this morning that there was absolutely no coldfusion "anything" in the program. I thought it was the way I set up the panels. But nope...
Now I installed cfbuilder. ok, fine it will cover all of the "programming" part of coldfusion and it looks like it will do that better. I get that.
BUT, how exactly do you take the "ugly" stuff that cfbuilder will help me build and actually turn it into a website that the latest trends require? I understand that I can open the file in dreamweaver and make it "pretty" but the real issue is that so much of the time the "application" that I am building is very much a part of the "website" that I am building - ok, ALL the time. What exactly is the commonly accepted workflow that will make this whole thing flow properly without having to switch between completely different applications all the time.
My issue is that maybe I don't understand that cf is a website language for displaying on web browsers, or am I wrong for the past 10 years...
Yes, I develop "applications" that are not pretty sometimes for the customer that needs a program made for them custom, but that is so rare that it does not accompany a website that holds it all.
How is this accomplished? I know I ramble and I hope I got my point across. Can you help me with finding a solution that will allow me to continue to use coldfusion in beautiful css and jquery websites as my customers have come to expect.
Please reply?

Why can't I continue with activation?

Similar Messages

Maybe you are looking for