Why can't I copy an image from photoshop, i can't paste it in anoter computer program ?

Why can't I copy an image from photoshop, i can't paste it in anoter computer program ?

Denis Beelog wrote:
Why can't I copy an image from photoshop, i can't paste it in anoter computer program ?
Assuming Windows...
You can, assuming you select around the pixels you want to copy, and the selected region isn't too large.
There are a variety of ways you can get the copy operation wrong, e.g., by not having the proper layer selected or similar.
And there's a secret setting to enable Photoshop to export its clipboard no matter how large the selected pixel set is.  Note the setting I have bolded below.  Keep in mind that by making this setting you may be subjecting all the software on your computer that registers to receive clipboard data to datasets that are larger than it might expect.  In other words, there could be a downside.  That being said, I haven't had any problems on my Windows 8 system.
# Photoshop "special items" user-specific configuration file
#  Must be named PSUserConfig.txt and be put here:
#   %USERPROFILE%\AppData\Roaming\Adobe\Adobe Photoshop CC 2014\Adobe Photoshop CC 2014 Settings\PSUserConfig.txt
#  All possible entries:
#   AllowAsyncIO
#   AllowOverScrolling
#   AllowUserConfigFile
#   ClipboardMaximumSize
#   DragBoundingBoxOpacityPercent
#   EnableGestureRotation
#   FileStreamDefaultSize
#   ForceProgress
#   FullPreviewMaxSize
#   GPUAllowGLXP64
#   GPUAllowPBOs
#   GPUCheckerBoardNodeInBlitPipe
#   GPUDiableMainWindow
#   GPUDisallowAdvancedGLRendering
#   GPUDisallowAppleClientStorage
#   GPUDisallowCanvasImposters
#   GPUForceLinearCheckerBoardNodeInBlitPipe
#   GPUIgnoreMemoryRequirements
#   GPUShouldNotScootATISelections
#   GPUUseAceNodeInBlitPipe
#   GPUUseFloatTextures
#   GPUUseVBLSync
#   MemoryAlignment
#   PDFAllowHugeFiles
#   PDFPresentationAllowHugeFiles
#   PreserveEXIFMakerNotes
#   RecentFilesSlowTimeout
#   SpringKoadedKeyTime
#   SyncSmartUploads
#   TrackPadAllowGestures
#   UseStagingServer
#   UseSystemStylus
#   VMCompressPages
#   VMDisableBuffering
#   VMForceBuffering
# Enable Overscrolling:
AllowOverScrolling 2
# Remove the clipboard export size cap
ClipboardMaximumSize 0
-Noel

Similar Messages

  • Why can't I copy an image or vector from Illustrator CC and paste to Fireworks CS6?

    Why can't I copy an image or vector from Illustrator CC and paste to Fireworks CS6? This was possible with Illustrator CS6. I know they are different versions but since there is no Fireworks CC, is there a fix update???

    Yes, other users have complained about that. Unfortunately, Fireworks' development was halted a year ago, and I would be surprised if Adobe spends any money or time to fix bugs and interoperability issues in Fireworks. I would not expect any real updates or fixes.
    Tough to swallow, but FW is dead in the water and EOL'ed.

  • How can I stop other people copying my images from my web site.

    How can I stop other people copying my images from my web
    site.
    I use dreamweaver CS3 for the mac

    both are a waste of time. Fornication with a leaky condom.
    Pointless and not
    worth the effort. Or worse!
    the obfuscation JavaScript will get the site to not be
    listed in any search
    engines because they can't "see" the page or any links on it.
    You would be
    "protecting" the images but no one would find them.
    And all of those obfuscation JS things can be reverse
    engineered. In most
    cases- it's not worth it to prove it can be broken other than
    to prove it
    can be done. The images are nothing special in almost any
    site using one of
    those $29.95 applications.
    Have you done the basics? Turned off directory browsing or
    put a default
    index page in every folder? A few years ago i ran across a
    site with one of
    those block right click scripts on it. Dumb curiosity- opened
    a picture, and
    looked around the directory. All open directories. A block
    right click
    script and every folder on the site was open.
    /photos/private/girlfriend/hottub
    Nuff said. The blocking script made me curious enough to poke
    around the
    directories.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Why can't I import raw images from camera to lightroom 5.7.1?

    why can't I import raw images from camera to lightroom 5.7.1?

    You can visit the Lightroom Journal to see the new features of LR6/CC, including new cameras supported in this release:
    Lightroom Journal | Tips and advice straight from the Lightroom team.
    And yes, as DJ confirmed, the Nikon D7200 is listed.
    The the full list of supported cameras is here (Lightroom and Camera Raw have compatible engines and identical support):
    Camera Raw plug-in | Supported cameras
    Mike

  • Can't copy an image from a smart album to normal album

    I created a few smart albums that just show images from October, November, etc. Now I'm trying to pull a few images from each of those albums into a regular (not-smart) album (it will be of highlighted images, one from each month).
    When I drag the image across, the plus sign is there, and it looks like it works, but when I click on the regular album, it's empty.
    The only way I can find to extract an image from a smart album to a regular album is to choose the image and select "new album from selection", but that won't work as I intend to pull many images into a single regular album.

    Nah, tried that. I have the new album set to "Show All" and no other filters.
    I would appreciate it if someone else tried this and could say if they can reproduce it.
    Source album:
    Date: Capture Month: April
    Date: Capture Year: 2008
    Include Stack Picks only
    include if: ALL match
    Target album:
    New, empty album, no filters.

  • Why can I no longer open images with Photoshop CS3, running on Mac OS 10.4.11?

    Why can I no longer open images with Photoshop CS3, running on Mac OS 10.4.11?

    You may be able to drag and drop the icons from one toolbar onto another, you can then hide the toolbar that you no longer need. For details on how to do that see https://support.mozilla.com/kb/How+to+customize+the+toolbar

  • Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

    Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

    Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
    If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
    To remove the image capture preferences:
    If Aperture is running, quit Aperture,  and log off and on again.
    Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/  then hit return.
    In the window that opens remove "com.apple.ImageCapture.plist"
    and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture  something .plist  remove them too.
    then try again.
    And if that still does not help, remove the Aperture preferences as well:
    ~/Library/Preferences/aperture.plist
    Regards
    Léonie
    P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
    You can reveal it also  from the Finder's "Go" menu:
    Finder > Go,   then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

  • I can't down load my images from my Nikon D4 to Apeture.

    I can't down load my images from my Nikon D4 to Apeture.

    Hi skhart1998,
    I also use Nikon D4, D2H and D2Xs
    I use Nikon Transfert 2, the latest version, to download my shots to my MacBook Pro hard disk in a picture folder. After this I use Aperture Import to place the New folder created in the Nikon folder in the Aperture Inspector folder... This way, I always have the copy of my originals files.
    .jpg or .nef  work fine.
    Denis

  • How can I restore a single image from an aperture time machine backup, do I have to restore the entire library? that does not make sense

    I hope there has been found a more efficiant solution for this,  how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
    any suggestions?

    Did you try browsing your backups in the Finder ?  That is, do not go and "Enter Time Machine".  Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.

  • How can I keep a photo image from fading away on my tv using apple tv.

    How can I keep a photo image from fading away on my tv using apple tv?

    Thanks for you reply.  When I paint, I bring up the photo as you suggested.  I begin painting.  After about 10 minutes or so, the photo goes blank.  And, I have to start the process over again to get that same photo.  It interrupts the painting process.  I think it goes blank due to a sleep function.  I have gone into the Apple TV settings and turned off the sleep function.  But, this does not seem to work.  What can I do to keep the image on the TV screen permanently?

  • Can i create a single image from multiple images in lightroom?

    Can i create a single image from multiple images in lightroom?

    Like a panorama, a composite or focus stack? Have you tried the Lightroom forum?
    Photoshop Lightroom

  • After updating numbers and pages I can no longer copy multiple cells from numbers and paste and match style to pages.

    After updating numbers and pages I can no longer copy multiple cells from numbers and paste and match style to pages.  I used to be able to select multipule cells in a row (such as company name, address, etc.) then paste and match style on to a pages letter. I found the paste and match style option in the edit menu, however it will only work one cell at a time. Before the update is was working great.

    For diagnosing purpose thy the procedure in a new user account and see if it works there. You create a new user account in the System Preferences > Accounts. If it works in the new account it is probably a corrupt plist file that needs to be deleted.

  • How can I best load RAW images from a Canon SX50?

    How can I best load RAW images from a Canon SX50?

    9Sorry, ........confused about this process.   When I attempted to Post the question I had entered, I was told a blank space could not be posted.  So, I reentered the Q in the "space"........ which apparently was the space for an answer....!! ??......)
    >  When I try to load RAW images taken by my Canon SX50 from the SD card, iPhoto 11 -  (iMac/OSX 10.6.8) tells me that it can't read the format or something like that.    OSX 10.6.8 came out before the SX50, thus, did not include the related program.           I want to shoot RAW on the SX50....... but I then want to load them into iPhoto....... which I do directly from pics I take with my Nikon D200.  
    Not sure if this will help.............

  • Can I capture a still image from a quicktime movie?

    Can I capture a still image from a quicktime movie?

    Yes. But how you do it depends on your version of quicktime.
    If you have the pro version, you can easily use the "Export" option to output the video as a series of images.
    For the basic version of quicktime, or if you want to quickly take make a still image of a single frame, you could just use the "Grab" application in OSX to take a screen shot.
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh364.html

  • How can I take a still image from a video?

    How can I take a still image from a video?

    I'll assume you want to create a still to use outside FCPX, not a still frame within FCPX.  It's kinda hidden in the "share."  Go File/Share/Add Destination.  You want "Save Current Frame."  After you've created that destination, it'll be there for you in the future under Share.

Maybe you are looking for