Why Can't I Copy Files from an External Hard Drive or SD Card?

Major problem here... Why when I try copying files from an external hard drive or an SD card onto my internal iMac hard drive, it doesn't work?  The status bar that pops up, shows that it completes the transfer of the files to 100%; however, when it does in fact finish, the files actually do not appear on my hard drive.
Any help would be greatly appreciated.  This is one of many problems I have been finding with OS X Lion and am very much on the verge of going back to Snow Leopard.
Thank you.

Have u tried the usual? Safe boot. Delete finder plist files? etc. And the drives are formatted for mac yes?

Similar Messages

  • Why can't I copy files from my external hard drive - error code -50.

    I sm trying to back up an external hard drive to a network drive. Some files copy but not all;.  SOmetimes a folder seems to have copied but then I see that most of the files inside have not.  And sometimes I just get 'An unexpected error has occurred'.  Error code - 50.
    I need to have a back up copy of the files on this hard drive.  How can I stop this happening and copy files properly and securely?
    The external hard drive is a LaCie bought from Apple, share formatted FAT32.
    The network drive is a WD MyBookLIve Duo which WD tell me should work equally well with any operating system.
    Please advise.  I need to archive a security copy of this data urgently
    John Wood

    Have u tried the usual? Safe boot. Delete finder plist files? etc. And the drives are formatted for mac yes?

  • I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
    Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
    Ciao.

  • HT2518 i would like to copy files from an external hard drive to my Mac. I intend to do this several times. Does Mac identify this files which have already be copied over or does it re- copy them every time?

    i would like to copy files from an external hard drive to my Mac. I intend to do this several times. Will Mac copy the same files every time or can it segregate and only copy new files from the external hard drive?

    Only copies the file or files you select. The selection will remain unless you change it in case you wish to repeat the same copy to another location. Multiple and different copy operations can be run simultaneously.

  • Can I import .MTS files from an external hard drive into Final Cut Pro X?

    Can I import .MTS files from an external hard drive into Final Cut Pro X?

    Luis Sequeira1 wrote:
    b) Use an utility like Clipwrap or MPEG Streamclip to convert the mts file to a quicktime (mov) file
    Luis,
    Just to clarify one point…in order for Streamclip to convert the MTS I believe a plug-in like the AVCCAM QuickTime importer from Panasonic needs to be installed. (Credit David McClain over at the FCS boards for that info.)
    Russ

  • How can I copy files from an external hard drive without creating copies on the disk?

    I recently purchased a MacBook Air as part of a requirement for schoolwork. I decided to use it to sync music to my iPod and iPhone, and it worked perfectly well, however, i keep most of my music files on an external hard drive. Recently, it started sending me messages about the hard drive being almost full. I checked on the about this Mac screen, and it said that up to 95 gigabytes on the disk drive had been taken up by music. This was not my intention, as i had previously assumed the music was kept on my external hard drive as it had been on windows. I attempted to delete the folder, but it now said that my disk drive was taken up by "other" files. I want to still use my iTunes without these files copying. How?

    Hi flyingroastchicken,
    If the songs are being stored on your Mac, then make sure that the location of where the iTunes media is being store. Take a look at the article below to verify that you have it set up the way you want. 
    iTunes for Mac: Moving your iTunes Media folder
    http://support.apple.com/en-us/HT201562
    Take it easy,
    -Norm G. 

  • I get error 8062 when trying to copy files from one external hard drive to another. It starts out copying files, but after 10 minutes or so it stops and I get the error 8062. The hard drive tech support says the problem is in my Macbook Air.

    I cannot copy my doc and photos and videos from one external hard drive to a second external hard drive -- both plugged in to my MacBook Air -- I get Error 8062 and the copying (which seemed to be going on for 10 minutes) stops and nothing gets copied.
    As any Macbook Air owner knows, there is SO LITTLE storage capacity on the computer that you have to back up big files onto an external hard drive to avoid getting the other annoying error that says you have no more memory/storage capacity/whatever the proper term is, and you cannot use the computer.
    Backstory: Before this error cropped up, I had backed up lots of files to an external drive and then removed them from my computer. But then the external hard drive got corrupted and I could not access my entire photo library. Had to pay $850 to Kroll Ontrack to recover those files. I have now bought 2 new external 1 Terrabyte  hard drives as protection against another such disaster. BUT I cannot copy the files from the first hard drive where all my reovered files now sit, to another backup hard drive.
    Feeling vulnerable. Please help.
    SusaninNY

    From the menu bar, select
     ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
    and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
    If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    Test the drive with another Mac. Test another drive with this Mac.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    Start up in Safe Mode and test.
    If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

  • How can I copy files from one external hard drive to another, without erasing anything?

    Hi,
    I have video and photo files on one hard drive. I'd like to keep that one intact but also copy all the files to a second external hard drive. When I try to do so, I can't figure out how to open both hard drives at once. (If I open one, it closes the other window.)
    Thanks for your help!
    CB

    Open a finder window and open up one harddrive. Then go to file>new finder window. This way you can have two finders up and select a different harddrive in each one. Then just copy and paste the files.
    Hope it helps!
    Ryan

  • Why can't I download songs from an external hard drive onto iTunes?

    So I have an external hard drive with some songs on it that I wanted to get on iTunes so they can be synced to my iPod. I plugged my hard drive in and then went to iTunes where I clicked on "File" (in the top left corner) and scrolled down to "Add folder to Library". I then found my external hard drive and selected the albums/songs that I wanted.
    They loaded onto iTunes just fine. Everything looked right and the songs were all on the list. I even managed to get album artwork on most of them.
    Then I went to "sync iPod" and an alert message popped up saying "Some of your songs were not synced to your iPod because they could not be found." (Or something very similar to that)
    So none of the songs made it onto my iPod and when I checked the Library list again, all of the songs I had just put on iTunes had exclamation points in front of them.
    What am I doing wrong and how can I fix this? Any answers would be greatly appreciated.
    Thanks!

    Sounds like you
    1) added the songs to the itunes database, but did not copy the acutal files to the PC's internal HD
    2) unplugged the exHD and now itunes doesn't know now to find them anymore
    If you plug the exHD back in, and it has the same drive letter as it did when you added the songs to itunes, it should work.

  • Problems copying files from an external hard drive to MacBook (error code 36)

    A little while ago I backed up some files on my iMac to an external hard drive (formatted in the Mac format). These were primarily office documents (PDF files, Microsoft Office) and some photos. The documents had orignally been copied to my iMac from a PC (via USB), whilst the photos were imported directly to the iMac. Having brought a MacBook Pro recently, I've been attempting to copy the data over. Unfortunately, I keep getting error code 36 when it attempts to copy the files over. I've tried skipping some of the files it gets stuck on, but it keeps finding more. This also happens when I am just trying to copy over a folder of photos. Another unusual thing that I noticed is that when I try to copy a folder containing just under 300 files, when it attempts to copy it says it is trying to write 1,500+ files... which I don't quite understand.
    I've run the disk utility tool to check the hard drive, but it says it's fine. Prior to copying the data over to the external hard drive in the first place, it had been freshly formatted. Unfortunately, since this was the backup disk, I kinda need to save these files!
    Does anyone know of any solutions out there that could help?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I can't delete any files from my external hard drives since I tried to delete backups. I can't return backups or delete anything now.

    It started when I tried to delete back up files. It wouldn't let me delete them. Came up with "BootX" is locked, then "boot.efi" is locked. Holding down Option while emptying the trash didn't do anything. It wouldn't let me put them back in Backups.backupdb so I just left them in the trash.
    But now I can't delete any files from either of my external hard drives. please help!

    See Pondini's TM FAQs for starters.

  • How can i unlock my files from an external hard drive set up previously on windows?

    hi
    i created some files on an external hardrive when i had a windows os on a laptop
    i am trying to unlock them files to sort or delete them the external hardrive is now connected to my imac
    i would know any passwords but there is no option to unlock they are read only files?
    do i need to open through a windows program again?
    or any other way?
    using OSX 10.9 (13A603)
    thanks in advance if anyone can help

    Mac OS X can't write to NTFS drives by default. Drag them to the internal drive first.
    (91809)

  • How can i copy files from one external hard disk to another using macbook pro with retina display

    How can i copy files from one external hard drive to another using macbook pro with retina display?

    That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
    Clinton

  • Why has iTunes seperated a album which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

    Why has iTunes seperated a album into indevidual songs, which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

    Steve MacGuire a.k.a. turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message/9910895)
    Quick answer:  Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
    If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields.  If they are not a multiple CD set you still need to make sure the disc number fields are set correctly or all empty.

  • How do I copy files from a seperate hard drive to Bridge

    How do I copy files from a seperate hard drive and paste them to Bridge

    Bridge is just a file Browser, nothing more and nothing less.  It doesn't create folders of its own and it doesn't keep image files in the application itself.
    You don't "paste" anything "into" Bridge.  You just navigate Bridge to the other drive where the images are, point it toward said files, and Bridge will show them to you.
    Once you find your files, you can use Bridge to move them or copy them to wherever you want.  They will never be "inside" Bridge.  As soon as you disconnect the other hard drive, Bridge will have no record of them unless you copy them over to a drive that is always attached to your computer, such as your boot drive or another internal drive.
    Recapping;  Your images are never in Bridge.

Maybe you are looking for