Why can´t I create projects and tasks into a External Group?

Why can´t I create projects and tasks into a External Group?

At this time, it's not possible to collaborate on a Project with External Contributors or add an Externally-Facing group to a Project. This is functionality that we we hope to add at some point in the future.

Similar Messages

  • Question why can't i create project in i movie

    I have installed os x 10.8.4 a while ago and have gone to use iMovie. I get a box appear saying cannot create project check disk to ensure enough free space and that i have permissions.
    I have enough space.
    I have made sure i have permissions to read and write.
    I have run repair permissions.
    Nothing i do solves the problem.
    Please help

    Hi
    I have enough space. - Exactly How Much - AND WHERE ?
    I have made sure i have permissions to read and write. - OK
    I have run repair permissions. - OK
    Did You try to trash iMovie pref file ?
    or rather - as it is easier and by-pass more files
    - Create a new User Account
    - Log into this
    - Now try iMovie
    If it works OK now - then we know where to find the problem
    If still not working - it suggests more that can interfere
    - Material used in Events / Projects got corrupted
    - iPhoto Library corrupted or wrongly selected to one that iMovie can not find
    - iMovie got corrupted = need to be re-installed
    - and many more
    See if You can give more info - to set us up on tracking the fault in the right direction.
    Yours Bengt W

  • Why can't I create a new folder on an external hard rive

    I have two external hardrives that are self powered and require no outlet.  I've begun to use all of the memory on one and want to use another.  I plug in the second and creating a folder isn't an option.  I set up the first hard drive through my mac, but the second was given to me as a gift and I didn't have to set it up with my mac.  How can I solve this problem?

    It sounds like the second disk drive is not formated so that the Mac can write to it.
    You are going to have to reformat it to HFS+.
    If you do that all of the data on it will be erased so backup anything of value first.
    Allan

  • Why can't I create a response to an email from the Viewer window?

    Why can't I create a response to an email from the Viewer window?
    When I select an email to respond to in the viewer window and click on the respond arrow that appears just under the header, a new response email opens for a split second then disappears.
    I have to actually click on and open the email message in its own screen to be able to then click on the respond arrow and succeed in having Mail open a response email that I can edit - one that remains open.
    This seems to be a bug that we need to have squashed.
    Steve

    Do I have to connect the iPad to a computer to make this work? Is the fact that I used another email address to set up my Apple ID years ago causing the problem? A friend of mine just got a new iPod and he was able to set up a me.com account. I am feeling rather stupid. Hope someone here can help.

  • Why can I no longer drag and drop in iMovie 11?

    Why can I no longer drag and drop in iMovie 11? This means I can't select transitions, titles, or even move clips within the project. Never had this problem before.

    Serious bugs in iM 11 with numerous lock-ups and crashes.  I shouldn't have upgraded -- now I'm pulling out my hair trying to complete a video project with it.
    Apple is losing their way.

  • Why can I not create a PDF from a web page on my Adobe Acrobat 8 Pro on my new Windows 8 computer? It worked fine on my windows XP system?

    Why can I not create a PDF from a web page on my Adobe Acrobat 8 Pro on my new Windows 8 computer? It worked fine on my windows XP system?

    Acrobat 8 is not compatible with Windows 8,  for the simple reason it was
    created much before it and Adobe could not participate the changes to the
    OS that Microsoft implemented many years later on. You need to buy the
    current version for compatibility.

  • Why can't I create a document in my Facebook group on my iPad? It won't let me input any text into the text box field after I create a new document. Thanks.

    Why can't I create a document in my Facebook group on my iPad. It won't let me input any text into the text box field after I create a new document. Thanks.

    Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
    I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
    The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
    I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

  • My daughter is 11 years ild, soon. Why can't I create i Apple id for her?

    My daughter is 11 years ild, soon. Why can't I create i Apple id for her?

    Because a law in the USA requires website operators to obtain parental permission before collecting any personal information from a child under 13, and many have simply chosen not to allow them to sign up.
    (100003)

  • Creating projects and wbs elements

    I am running a conversion and for the upload portion I need to create projects and the relevant wbs elements in the system.  I have been looking over the forums etc and have seen many notes regarding BAPI_BUS2001_SET_STATUS, BAPI_PROJECTDEF_CREATE, and BAPI_PROJECT_MAINTAIN.
    My problem is this.
    I need to update the APPR and PREP system statuses of the projects I create and I can find no way to do this with a BAPI.  I also need to update the location of the project (stort) and the only BAPI I can find that will allow me to do this is BAPI_PROJECT_SAVEREPLICA which seems incorrect to use in this manner.
    in short:
    How do I update project system status of PREP and APPR?
    How do I update project location (stort)?
    Having no luck finding solutions so any help is appreciated.

    Hi,
    I've used these BAPIs but not for your fields. But maybe I can help you. There is no field LOCATION in the project definition but there is field LOCATION on WBS level. So have you tried to change this field on all WBS elements for your project?
    Unfortunately your system statuses are not supported by this BAPI. All supported statuses are mentioned in BAPI documentation. There is a FM STATUS_UPDATE_PROJECT which might help you but you need to be careful what you do. There are some additional FM STATUS_* for generic object status modification but again, you have to be sure that you can set up that system status without any additional checks.
    Good luck

  • I updated to yosemite os and was in the middle of a project with final cut pro 10.  Now it says final cut pro is incompatible.  How can I access my project and/or update final cut?

    I updated to yosemite os and was in the middle of a project with final cut pro 10.  Now it says final cut pro is incompatible.  How can I access my project and/or update final cut?

    There is this offer of a trial version FC Pro X with 30 day runtime:
    http://www.apple.com/final-cut-pro/trial/
    Too bad you didn't have a complete backup that could run the previous OS X
    and then you could resume using an earlier Final Cut Pro (10) or (7) since a
    clone would have been a means toward that position.
    http://www.apple.com/support/finalcutpro/
    http://www.apple.com/support/pro-apps/
    This appears to be another good reason to check out all the reasons why one
    would want or need to upgrade a working OS X version, since these kinds of
    events are known to happen as a direct result.
    Sorry to not have an answer to this, other than try & use the Trial version...
    Or see if someone at Apple sales/support can field your issue w/ an answer.
    Good luck & happy computing!

  • Why can't I create a new note on my iPad?

    Why can't I create a new note on my iPad?

    tammy313 wrote:
    the options in the tool bar at the bottom are not highlighted and it does not respond to my touch.
    You are talking about the forward, back, mail and trash can icons in the Notes App - correct?
    I've gone through restarting it and followed the instructions from the person last week.
    Have you restarted the iPad - is that what you mean? Have you quit and then restarted the app? Quit the app, and restart the iPad. It's worth a try.
    Double tap the home button and your recent apps will appear at the bottom. Hold down on the Notes app icon until it begins to wiggle. Then tap the minus sign to quit the app. Then tap the screen. Now restart the iPad.
    Carolyn explained this above (restart) but here it is again....
    Hold down on the sleep button until the red slider appears and slide to shut off. Hold down on the sleep button until the Apple logos appears then let go of the button and the iPad will restart. See if that helps.

  • Why can't I create property nodes for item in STRICT typedef cluster?

    I've tried this in LV7.0/WIN2k and LV 7.1/OSX - both versions work the same.
    I have a TYPEDEF consisting of a cluster of items A, B, and C.
    I have a front-panel instance of this typedef.
    Under certain conditions, I want to disable and gray Item C, because it's not applicable.
    So I need a property node connected to item C.
    If the typedef is STRICT, then I cannot create such a property node - the menu item to create anything is just not there.
    If I change to NON-STRICT, then I can create the property node.
    I can change it back to STRICT, and the property node works just fine.
    The question is, if the nodes WORK normally, why can I not CREATE one?
    If there's some sense behind this, someone please point it out to me...
    Steve Bird
    Culverson Software - Elegant software that is a pleasure to use.
    Culverson.com
    Blog for (mostly LabVIEW) programmers: Tips And Tricks

    I agree with you, It would be nice to be able to keep the non strict typedef auto-update and extend it to properities which effect the look of a control. I am not sure why you can change the properities on a strict typedef. A strict typedef should have private properities (can only be changed from within the definition and no public other vi scope for writing these values. I have in the past used a custom control for presentation purposes and contained the structure of the data to be displayed within the typedef cluster. This is not all that automatic since we need vi's to convert between the definition and control. Seperating data structure from presentation is much like XML where the file only contains data structure and a reference to a style for presentation. It would be a very nice option to allow nonstrict typedefs to have an additional auto-update properities which could be toggled on and off. I would be curious to here others opinions on how to keep data structure and presentation consistant across an application without being tied down to a strict typedef (allowing the optional change of teh presentation at runtime).
    Paul
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • Project and task on Internal requisition from ASCP

    Hi Team,
    We have an organization Project enabled. Sale  and the Planning suggest the Planned order (of the nature internal requisition). When Planned order is released Internal requisition distribution is not pulling the project and task information.
    Can any one help?

    Hi Veekam,
    Let me get clarity------You are releasing the requisition from Workbench of item that is hard pegged in your( Shipping)organisation.
    you can see a project no and task assign to the planned order
    You do not want the project no and task to follow to supplying organisation , but only IR should carry the PJ no and task.
    I fail to understand if you do not want the Project no and Task to flow on ISO, then what is a use of Flowing with IR
    Because if it flows with IR automatically it will appear in ISO as well.
    You will have to also check whether the item is also hard pegged in supplying Org in that case only PJ no and task will flow to that org
    IR/ISO relation is permanent whatever information IR will carry you will see same in ISO
    Chintamani
    9922081219

  • Project and Task information on Internal Requisition

    Hi Team,
    We have an organization Project enabled , and the Planning suggest the Planned order (of the nature internal requisition). When Planned order is released Internal requisition distribution is not pulling the project and task information.
    Can any one help?

    Hey - can you precisely provide your business case
    Internal requistions do have project and task ,you can select those
    Krishna

  • Why?  Why can't I run iMovie and have it

    Why? Why can't I run iMovie and have it ask me whether I want to load an existing project or new one? I don't see a setting for this in Preferences.
    thanks

    I haven't gone to the trouble of actually testing to see which uses more CPU power, but Firefox has been faster than Safari on every Mac I've ever owned.
    To see CPU usage by process, open the terminal (in Utilities) and enter 'top' at the command line. You might have to expand the window as processes don't appear in any logical order.
    It could also be hardware-related: I have late 2009 mini with similar specs and it pinwheels easily.

Maybe you are looking for