Why can't I export photos edited in iPhoto 08?

Hi, hoping for help. I posted elsewhere but think it was in the wrong place.
I have labouriously edited some 700+ photos with the intention of exporting them web sized to a desktop folder where I intend batch watermarking them before importing them into iWeb.
Unfortunately, every time I attempt to do this the uncropped/rotated photos get exported. I tried doing it by album, event and directly from the library to no avail.
I'm using 10.5.8 and iPhoto 7.1.5
Suggestions would be appreciated.

How are you exporting the photos? What settings are you using in the Export window?
Are you able to drag an edited photo via the thumbnail to the desktop and get the edited version? If not try rebuilding the library as follows:
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all options. If you have enough room on your boot drive make a backup copy of the library before rebuilding just in case.
Then try exporting again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Similar Messages

  • Why can't I email photos direct from iPhoto?

    Why can't I email photos directly from iPhoto, or even attach them to email?

    I get a dotted frame outline with an exclamation
    This is the source of all the problems. iPhoto can't mail the files because it cannot find them.
    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    What version of iPhoto? Assuming it's 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • IPhoto 11 - Saving/Exporting Photos Edited in iPhoto 11

    I just updated to iPhoto 11 from what I think was iPhoto 09. In my previous version of iPhoto, I would import photos from my camera, edit (crop, straighten, adjust, etc) and then I would FILE/Export photo in .jpg format to my hard drive for backup and upload to flickr.
    When I follow this same procedure in in iPhoto 11, the edits that I make in iPhoto do not save to the exported photo. The application just exports the original file w/o edits.
    What am I doing wrong? Is there a fix?
    Thank you,
    Charles

    I am exporting as a JPG. I think I figured out the problem. In the old iPhoto I could export from the Edit menu. On this new version, I have click on the Photos button and go back to the screen that shows the whole event and export from there.
    It's a pain and much less efficient but it seems to be working.

  • Why can't I use photo's edited in iPhoto in iWeb?

    Why can't I insert photo's edited in iPhoto into my website design? It will only allow me to insert pictures that have not been edited. Is there away around this? Or a reason for it?

    Welcome to the Apple Discussions. You should be able to add edited photos from iPhoto to an iWeb page. How are you adding them and to what type of page?
    OT

  • Why can I no longer import EDITED photo from my iPad to my Mac using Image Capture from Snapseed app?

    Why can I no longer import EDITED photo from my iPad to my Mac using Image Capture? This is farcical and a real problem having to email them individually to myself and is totally inefficient time wise compared to previously using image capture! Why change this when it was working well and very quickly until the latest change. Now I have to move files from downloads into an appropriate folder, after emailing each individual edited image to myself, then I have to open in Photoshop and rename the file. This is ludicrous and takes forever to do!

    Thank you! I suppected it would be in the settings somewhere. I' ve much to learn...get myself into trouble pushing buttons I don't really understand.

  • Why can I no longer import EDITED photo from my iPad to my Mac?

    Why can I no longer import EDITED photo from my iPad to my Mac using Image Capture? This is farcical and a real problem having to email them individually to myself and is totally inefficient time wise compared to previously using image capture! Why change this when it was working well and very quickly until the latest change. Now I have to move files from downloads into an appropriate folder, after emailing each individual edited image to myself, then I have to open in Photoshop and rename the file. This is ludicrous and takes forever to do!

    There has been a change in where Firefox searches for plugins and the plugins folder in the Firefox program folder is no longer scanned for plugins, so Firefox won't find them anymore if they are installed in the plugins folder instead of the "browser\plugins" folder that Firefox now scans.
    You can set the plugins.load_appdir_plugins pref to true on the about:config page to make Firefox scan the "<install>/plugins/" directory for plugins like the WMP plugin (np-mswmp.dll).
    *http://kb.mozillazine.org/about:config
    You can alternatively move plugins from "<install directory>\plugins\" to "<install directory>\browser\plugins\" (create this folder when missing) to make Firefox find them again.
    *http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/
    *http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/

  • Why can't I move photos from Lightroom to Elements II for further editing?

    Why can't I move photos from Lightroom to Elements II for further editing?

    You can. select the image you want to edit externally then :-
    In the top toolbar Go to :- Photo, Edit in Adobe Photoshop Elements Editor
    If this isn't working got to :-
    Edit, Preferences, External Editing
    .....and check that Ps Elements is set there. You are able to set two external editors.
    Good luck!

  • Why can't I do cumulative edits, like in iPhoto 6?

    I've just bought a new iMac (Core i5) running the latest iPhoto (9). It has some useful improvements over iPhoto 6 which was the previous version I used, but one thing has gone - I can't do cumulative edits any more.
    In v6, I could sharpen a soft picture 100% then navigate away so iPhoto saved my edit. Then I could go back into that photograph, click Edit again, and all the sliders would be reset to their default zero settings. I could then add more sharpening to the picture, get iPhoto to save it, return if necessary, sharpen more, and so on. This was a godsend where an edit needed to applied more than once.
    Now, I can't do that any more. When iPhoto saves my edit and I go back into that photo, the sliders are where I left them!!!! I can't ever apply more than 100% sharpening to a picture. That *****, really bad.
    Why did they change that? It seems so unnecessary. The Revert to Original was always there, and it still is - so why can't I apply cumulative edits now?

    Keith Barkley wrote:
    But this allows you to unsharpen without having to go back to scratch.
    It is not a question of treating you like a grownup, it is a question of preventing JPEG artifacts.  In the old way, you had to continually re-JPEG the image, losing quality and detail with each editing pass.  Now it always starts fresh with the master.
    But I am not the engineer, so I don't know if this was a conscious choice or a result of CoreImage.
    I don't ever want to unsharpen (i.e. blur). And even if I did, that was possible pre-iPhoto9 by sliding the slider into the negative band from its midway position. It's extremely difficult to oversharpen in iPhoto, even cumulatively, as the control (IMO) is usually superior to Adobe's.
    I found iPhoto 6 (and now iPhoto 9) had subtle, but high quality edit controls. The chances of JPEG artefacts - at any rate from a keen amateur photographer like me - were around zero.
    I believe that what I wanted could have been implemented with a simple Preferences choice :
    O  Maintain edit slider positions even after Save (non-destructive editing)
    O  Reset edit sliders to default positions after Save (destructive editing)
    That would have made everyone happy. Now, for those pictures which need cumulative sharpening (admittedly, a small number), I may as well do everything in Elements.

  • I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

    I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

    Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
    It sounds like you are using two methods to upload to Facebook:
    1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
    2. Exporting pics and uploading to Facebook from the browser.
    I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
    I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
    Your problem is not with Aperture, it is using Facebook for showing your work.
    If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
    If you insist to use Facebook as your way to share your work, then your workflow should be this:
    1. Right click images you want to share.
    2. Select Export version.
    3. Export as 100% size and ensure the export settings are set at 100% quality.
    4. Upload this pic into Facebook.
    This will get you the best image size and resolution on Facebook.
    See how you go.

  • Why can't I export a 4k ProRes movie in premiere?

    Why can't I export a 4k ProRes movie in premiere? There is no quicktime codec listed anymore...
    In all of the previous versions of premiere i was able to select my ProRes codec for exporting a movie.
    I'm strubling all day now. Please help!!

    I will move your message from the Cloud forum to the Premiere Pro forum
    And you need to provide a LOT more information when you ask a question
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

  • Why can't I delete photos of my iPad ?

    When I choose edit in attempt to delete photos I can see the delete icon but even when photos are selected it will not highlight or become active ? Why can I not delete photos ?

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • Just because I have an imac pre 2007 why can I not order photo albums???!!  I spent hours building a photo album for my parents only to find out that because my mac is earlier than 2007, even though I have 10.6.8, I can no longer order?! What is that

    Just because I have an imac pre 2007 why can I not order photo albums???!!
    I spent hours building a photo album for my parents only to find out that because my mac is earlier than 2007, even though I have 10.6.8, I can no longer order?! What is with that? This makes no sense. I can go online to various "photo shop" place and regardless of the OS and computer I am working from I can order a photo album so why can I no longer do this through iPhoto on my MAC?
    How do I order my album now? If somebody could please explain as I am going home in 1 month and really wanted to surprise my aging parents with this book.

    I found this:
    http://store.apple.com/us/help/print_products
    Have you tried this?

  • How can I, or can I export my songs on my iPod back to my computer?    The songs on my iPod Video 5th Gen now, were at one time on my computer, but have since been erased. Why can't I export the songs from my iPod back on to my computer? I have this

    How can I, or can I export my songs on my iPod back to my computer?
    The songs on my iPod Video 5th Gen now, were at one time on my computer, but have since been erased. Why can't I export the songs from my iPod back on to my computer? I have this same problem with my other devices (iPad 3rd Gen and iPod Nano 6th Gen). I am really frustrated now, because it seems as if I have to start all over again. This will be a royal pain in the butt! I don't understand why Apple makes this so hard and impossible to do this. Please help, anybody!!

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I have no photo edit in iPhoto it should be simple but its just not there can you help

    Hi
    i have no photo edit in iPhoto it should be simple as click and it comes up but it is not there
    hope someone can help
    thanks

    Nope - you actually have to share details as  can not see your computer
    See hints here - Writing an effective Apple Support Communities question - and - Find answers and ask new questions
    LN

  • Why can't I add or edit an entry on myiPhone Cal?

    Why Can't I add ,or edit an entry on my iPhone Cal?

    Wienderful,
    Make sure your email address on the iPhone and the Exchange server are the same. This article explains more:
    http://support.apple.com/kb/TS1865
    Hope this helps,
    Nathan C.

Maybe you are looking for

  • ICO in PI 7.4

    Need help on ICO in PI 7.4 do we need to create it mandatorily while developing scenarios in PI 7.4 i dont see any option of generating wsdl files in PI 7.4 swing tool in integration builder. i need to create a POC where i need to pick a file from fi

  • Function: % of Total

    Hello all, I have a calculated value based on amount. I'm using % of Total function to calculate this value. If the amount is $0, then I am geting astrix(****) insted of printing 0. I am using Reports 6i version (Report Builder 6.0.8.19.0). Any help

  • Wordpress PHP widget workaround for Get Remote URL

    Have a client with a Wordpress site that uses this PHP widget WordPress › Remote Content Shortcode « WordPress Plugins Essentially they're displaying another websites div content on their own div. Is there a way to do this in Business Catalyst (jQuer

  • DNG format capture on Xperia devices.

    This is my first post on this forum. Just a quick question, why did sony remove the "RAW image capture capabilities" that are being rolled out with the lollipop update. Please make the camera 2 api available in the default camera app during manual sh

  • Business partner cockpit?

    Hi Guru’s What is Business partner cockpit how it will work? I will give points  Regards Mahi [email protected]