Why can't I export using Quicktime Pro to m4v without it being "protected"?

I have .dv files and want to convert to m4v files but when I upload them to my website they have "(protected)" after the file name and do not allow me to view them online. This happens from any format to the "iPod" (m4v) export. When I try to view them using Safari, the page fills with lots of symbols and Safari gets overwhelmed and crashes.
I've gone into "info" and can't find anything that seems to protect the file.
Any ideas on what's going wrong and what to do?
Thanks.
12" powerbook G4 Mac OS X (10.4.5) Quicktime 7.0.4

I've never gotten a "protected" file when exporting to the iPod .m4v extension.
Only those purchased from the iTunes Music Store have any DRM protection. If you had some purchased music in your .dv file the export would also be protected. Normally protected files don't even allow export.
If your file is being displayed as text in a browser window it means you've failed to use the proper html code to call the QuickTime plug-in.
http://docs.info.apple.com/article.html?artnum=61011
You may ned to use the qtsrc tag to "force" the QT plug-in be used for playback. Many servers are not configured to use the relatively new .m4v extension.

Similar Messages

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

Why Can't I Export to Quicktime from Garageband?

Has anyone else experienced this or would know how to fix it...
I created a .mov file from Keynote and brought it into Garageband as a Video Track to sync the music to the Keynote presentation. Now I'm ready to Export to Quicktime from Garageband. When I choose the Export command from the 'Share' menu in Garageband, it runs through two dialog boxes - first "Creating Mixdown" and then "Converting..." - after the second dialog box disappears no Quicktime file is created.
I have tried several things to remedy this, but have had no luck - such as updating to Garageband 3.0.1, running Disk Utility, restarting the computer. I also made sure to check the Preferences in Garageband before exporting.
Can anyone tell me how I can get it to export?
Also, the final Garageband file size is approximately 180MB and the presentation runs approximately 8 minutes. The final file will need to be 'full quality', as it will be shown from a projector at a meeting.
Mac OS X (10.3.9) Keynote v3.0.0; Garageband v3.0.1; Dual 1GHz G4; 1.5GB SDRAM

Which export did you use?
Try going into prefs->export, enable the export to disk option.
Than in the Share menu choose export to disk.
Then do a search on the name of your song (in the Finder) and see if it shows up.

Why can't I export from Premeier Pro CS5 to Encore CS5?

I have edited, renderred, and attempted to export to Encore to attempt to transfer to DVD
Premiere Pro CS5.5 with 5.5.2 update just downlaoded today
Windows 7 64 bit
Source AVCHD 1080p 25 Anamorphic
Error: ..\..\src\AMEPresetProber.cpp-265
I wasa exporting from Premiere Pro to Encore
This HAS worked before
No other software running
No other codecs loaded, that I know of
AMD Phenom IIx4 955 processor
No Mercury...Acceleration

Hi Devongeoff.
Thanks for your post. This error will not come if you try to change the user account or create a new user account. Once the Project is finished, uninstall all the adobe application and use cleaner tool and re-install them once again.
Regards,
Vinay

Need help automating movies export using QuickTime Pro 7.4

I would like to convert several movies (.mov) to .3gp and .mp4 for mobile phones. I found some sample code here to accomplish the automation process:
http://developer.apple.com/samplecode/QuickTime/idxQuickTimeforWindows-date.html #doclist
I built the sample QTControlCommandLine which is a command line program to convert a file from one format to another. When I use this program to convert a .mov file, there's no audio in the resulting .3gp (or .mp4); however when I manually convert the file (i.e. start QuickTime, load the .mov file and then export to .3gp), the resulting file is fine, with audio. I looked at the resulting files from both processes (using QT's view movie properties), and sure enough the manual process produces a file WITH an audio track, while the automated (COM) process produces one WITHOUT an audio track.
Has anyone encountered this problem? Is there some simple flag that the sample program failed to toggle to allow audio to be exported? I appreciate any leads to solve this issue.
Regards

Found my own answer. It is a licensing issue as indicated here:
http://developer.apple.com/qa/qa2001/qa1347.html

Why can't I 'Export Using Compressor Settings' in FCPX?

It keeps telling me I have to buy Compressor, which I did from the App Store.

Can you run Compressor from your applicaitons folder on the dock bar? Just trying to make sure you really got it installed after the download or maybe it had been aborted before completing the installation. It will run as a stand alone app if installed ok. After you confirm that you can look for other potential problems.

Why can't I delete a playlist from my iPhone without it being deleted on my kids iMac?

I consolidated music on my Macbook pro with my family iMac using iTunes Match. What I can't understand is that I can't "turn off" certain playlists. When I deleted some of my daughters' playlists from my iPhone, it removed the playlist from the iMac. Am I missing something? I had over 100 playlists listed, many of which I will never use. I can't imagine that Match isn't more versitile.

Now that you mention it, my parents don't need to see my playlists, either. Hadn't thought of that.
I accidently stumbled on an "ad-hoc" workaround that helped me. The downside is that it only works with smart playlists so it may or may not work for you. But here it is anyway:
Smart playlists will not be uploaded to the cloud if they refeence another playlist on the cloud. So I created a "catch-all" smart playlist and added a reference to that in all the smart playlists I don't want to share.
I also noticed that playlists with more than just music are not uploaded. You could add a short video or something to the playlists that are only for the iMac. This obviously won't work if your daughter needs them on her iDevice.
I know these aren't good solutions, but I hope they help someone.
Cheers,

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video?

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
Baffled in SB

What format of MPG is this? Is this an MPEG1 or MPEG2 video? How was the video created?

Exporting to .mp4 file using QuickTime Pro

Rather than use the Movie to iPod preset in QuickTime pro, I would like to export an .avi file to a .mp4 file using Movie to MPEG-4. I would like the resulting file to be encoded using h.264 video and to be 640 X 480. I want one file that I can include as an enclosure in the rss feed for my podcast that can be downloaded and played in both iTunes and on an iPod. So far, I have been able to create a .mp4 file that plays in iTunes/QuickTime but not on an iPod.
Would someone with experience in this please tell me which settings to use in the MPEG-4 export settings dialogue so that I get a file that can be played on the iPod.
The options are:
File Format (I chose mp4)
dropdown (I chose video)
Video Format (I chose H.264)
Data Rate (I know it's important that this not be too high but don't know what to put.)
Optimize For (download is the only choice for this option)
Image Size (I chose 640X480 VGA)
Preserve Aspect Ratio checkbox (My original video is 720X480. I don't think I should check this. I want to change the pixel aspect ratio to square pixels.)
using dropdown box (Letterbox, crop, fit within size) (only active when Preserve Aspect ratio is checked)
Framerate (I chose 29.97, which is the frame rate on the original .avi file)
Keyframe ( I set this to every 15 frames)

Thanks. I was aware of that information. But still am stuck on using QuickTime Pro to come up with a usable .mp4 file for the iPod. I think I am using the right settings, but it's still not working. That's why I included a lot of detail about the specific options in my question. Hopefully, there's someone out there who has used QuickTime Pro for this.

Why can't I export my FCP 6 sequence using Compressor 3?

I am wondering if anyone can tell me why I can't export my FCP 6 sequence using Compressor 3.0.5.
I have an hour-long 1080p Pro Res 422 sequence that I am trying to export using Compressor 3. Whether I export using the 'Pro Res 422' preset or the 'H.264' preset, transcoding commences but then stops abruptly 15 to 20 minutes later with an error message saying 'Quicktime Error: -50.'
For what it's worth, I have an early-2008 dual quad-core Mac Pro desktop with 6 GB of RAM and two ATI Radeon 5770 graphics cards. I am currently running OS X 10.6.8. The media (including Motion graphics) and project file are on an external drive connected via Firewire 800.
Any advice on how to properly export this sequence at the highest quality without getting the error message is greatly appreciated!
Shaun

Are you "sending" to compressor? Probably not the best way to work.
First step: make sure the sequence is COMPLETELY rendered. If you don't understand how to do that, post back.
Then, I'd strongly recommend that you export a quicktime file with current settings (file: export: quicktime movie NOT quicktime conversion) and bring that file into compressor and chose the appropriate preset.
This workflow isolates each step and makes it easier to troubleshoot.
Here are a few user tips that might be helpful
Some tips for using compressor
Common FCP Troubleshooting tips
sending to compressor from fcp - a few issues

Video files exported with QuickTime Pro 7.2 can't be transferred to iPod

If I use the default Export to iPod export choice in QuickTime Pro 7.2 to export video files and add them to my iTunes 7.3 library, when I try to sync them to my 5th generation iPod with video (November, 2005), I just get the "can't be played on this iPod" message. I can create, transfer, and play video files on my iPod if I create them a different way (by using iSquint, ffmpegX, or No Frills DVD2iPod, for example). Exporting to mpeg4 using h.264 results in the same problem, even though I've used settings I know worked before. The export to iPod export choice does not offer any customization of settings. Although this problem is new, I can't be sure the immediately previous version of QuickTime Pro didn't also have the problem, but I know I have successfully used QuickTime 7 to create videos that could be transferred and played on my iPod in the past. How can I use QuickTime Pro 7.2 to create video files that will be compatible with my iPod? Thanks.
Mac OS X (10.4.10)

I can also verify this (QT Pro 7.2 exporting to .mp4 not compatible
with video iPod [firmware 1.2.1 on both 5G/5.5G units]).
This results in the unusual situation where custom H.264 output
is operable on the iPhone but not the iPod.
Example: your iPhone should play
http://homepage.mac.com/retiarius/sample.elements.mp4
but it won't transfer to a video iPod.
Yes, the workaround is to 'export for iPod' or do the conversion
within 'iTunes', but this in many circumstances will generate
larger files.
The closest description of this situation is:
http://lists.mplayerhq.hu/pipermail/ffmpeg-devel/2006-September/015930.html
Perhaps Apple will release a video iPod firmware update soon
to get the 'uuid' atoms and whatever watermarking they are
using these days straightened out.
I'm surprised this hasn't been noticed more by video podcasters
who dutifully use Apple's own QT Pro encoding tool to optimize
filesizes via the tunable H.264/.mp4 codec settings.

Video conversion using Quicktime Pro (Which Export Settings?)

I tried converting videos (.avi) to .m4v so that I can play them on my iPod Touch. However I am having problems.
iPod Touch documentation says that the following video file formats are supported by iPod touch:
A H.264 (Baseline Profile Level 3.0)
B MPEG-4 (Simple Profile)
My question is:
1. Can anyone show me how can i covert to those format using Quicktime Pro? And please do let me know which exact EXPORT setting I am supposed to use. I used EXPORT> Movie to iPod . It did not seem to work.
Thanks in Advance.

I use it on a 24" iMac C2D running at 2.33GHz with 3GB of RAM, and it's much quicker than a regular QT export and a bit quicker than VisualHub. I won't quote a time to encode a "2 hour movie" because there's a lot more factors involved like resolution and original file encoding but the device is faster than using the twin cores.
No, it won't work with Handbrake, nor VisualHub for that matter. It acts as a plug-in (albeit hardware) for QT and any application that uses QT for export can utilise the turbo.264.
One other (for me big) advantage is that Elgatos own software for using the turbo.264 supports AppleScript and hence Automator.

Can I make an mp3 using Quicktime Pro?

can I make an mp3 using Quicktime Pro?

QuickTime can play .mp3 files and can edit audio formats but it can't export to .mp3.
Use iTunes for that.

IMovies - Export Using Quicktime - can't find the finished file - help please!

Please help. I exported several imovies projects to a designated file on my mac, using Share - Export using Quicktime and then I uploaded them to Youtube.
I did this successfully several times, now when I export a project, it takes about 45 minutes to export it, then I can't find them anymore.
I have read several threads, which suggest looking in the iMovie projects folder and locate your project Right-click to get to "show package contents" and they are not there.
It looks as if it goes through successfully, no errors but this is so annoying as I am wasting hours sharing and then can't find it. Please help anyone.
Thanks

Hi Gee
I originally spent about 10 hours uploading 3 clips directly from imovies to Youtube to a private channel and they couldn't find any signs of my 3 uploads. So I read threads that said export to Quicktime from imovies and then load them to Youtube that way. I did that for 3 short, 10 minute videos and it worked fine. It changed the thread to .mov and it worked.
Then perhaps I changed something (not sure what) but now when I use Export to Quicktime, it spends 1 hour or so doing the motions and completes but when I go to the allocated folder to retrieve it. It can't be found. I read threads and this seems to be a regular occurrence but I haven't read any replies that has solved this issue.
Hope that's clearer.

Exporting using Quicktime - PC Users can't see

I have created several movies that I am exporting using Quicktime. They are generally large files - 300MB or so. Mac users can see them fine - only some PC users can see them and generally that is using Firefox. Any suggestions on how/what to do? These movies are located on a school server (old) but I do not believe that is the issue..
Many thanks.....

jphelan wrote:
I have created several movies that I am exporting using Quicktime. ...
what are your settings in the 'Export with QT' dialog.. ?

Why can't I export using Quicktime Pro to m4v without it being "protected"?

Similar Messages

Maybe you are looking for