Why can't I find "Data Transfer and Memory " option in channel property node?

Hi All,
I'm trying to find some properties such as "Data Transfer and Memory " in my "DAQmx Channel" property node, as below
But, in my Labview 8.5, I can't find it. I re-installed NI-DAQmx, but it didn't work. What I can get is
Did I miss something? Thank you.
Regards,
Bo
Message Edited by foolooo on 10-23-2008 07:02 AM
My blog Let's LabVIEW.
Solved!
Go to Solution.
Attachments:
temp.JPG ‏11 KB

Hi Andrey,
Thank you for your reply. But I tried this on another computer on which lv 8.6 was installed, and it worked. I just simply dropped the channel property node, and didn't connect with any channel vi, and there were available options on that one. But for this pc, it doesn't work. I also configured the hardware in Mea & AE, it didn't help.
btw, my labview is full licenced.
Best wishes,
Bo
My blog Let's LabVIEW.

Similar Messages

  • Why can't EXS find my instruments and samples?

    Why can't EXS find my Instruments and Samples?
    LPX 10.0.7
    I have had issues with this problem before, and have spent a few hours looking throughout the many related threads on this forum and on Logic Pro Help without finding a workable solution.  So I will jump in again and hope for someone to shed some light on this.
    Here is the scenario- I have two rigs, one in my studio and another on my laptop (2.5 gh Intel core 2 Duo with 4GB RAM). I have a duplicate of my sample library on a portable drive, which I take with me when I'm using my laptop. I recently copied a Project I'm working on from the portable drive to my main system. When I open the project, I get a message telling me that certain (not all) EXS files are not found.
    Some further pertinent info:
    I have not saved the EXS files with the project- the project uses a sizable template and that would be cumbersome.
    All of the EXS instruments/samples in the Project are there on both my internal sample drive and the portable drive.
    The aliases linking my Application support Logic folder and the sample drive are correct and in place.
    This happens whether I have the portable drive mounted on my main rig or not. And whether I open the Project from the portable drive or from the copy on the internal drive.
    I have reindexed the internal sample drive with Spotlight. Didn't help.
    I have refreshed the Instrument menu from within EXS. Didn't seem to do anything.
    Anyone?

    Hi Sig! Thank you very much for your reply. But my version is iLife 11, and it should have an iWeb and iDVD

  • ITunes doesn't provide the ability to upload media from the iPod/Iphone. Why is this and why can't it be a drag and drop option as windows

    iTunes doesn't provide the ability to upload media from the iPod/Iphone. Why is this and why can't it be a drag and drop option as windows

    Because Apple have designed it that way.
    It's actually against the (Apple) rules of this forum to speculate about Apple's decisions, so if perhaps you should ask your question on a more appropriate (non-Apple) forum. If you continue the discussion here, you could simply find that your post gets removed by the moderators.

  • HT4413 Why can't I find the files and data I transferred from time machine on my new mac?

    So I just got a new mac and I always backed up my old mac. I used the migration assistant to transferr all the stuff from my old mac to the new one. After it completed I tried  to find all my pictures, music, and documents but couldn't. Where did all my stuff go and why can't I find it? Migration Assistant said everything transferred and went ok.

    Peruse Pondini's Setup New Mac guide and seriously consider starting over. I'm a firm believer in only using the Setup Assistant and not creating a new account on first boot.

  • Why can I print from my iPhone and not my iPad? I have been able to do it in the past and have tried a hard reset but it can no longer find the printer.

    Why can I print from my iPhone and not my iPad? I have been able to do it in the past. I have tried a hard reset but it still cannot find the printer.

    In addition to rebooting the router and the iPad, I would reset the printer as well. Unplug the printer from power and do the same with the router. Leave the router unplugged for about 30 seconds. Plug the router in first and let it totally start up, plug the printer in again, and then reboot/reset the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that doesn't work, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. Your WiFi passwords, location services, device preferences all have to be re-entered. You will not lose any data or media whatsoever.

  • Lens Data- Why Can I Not Find It?

    I use a Mac and ran the trial version of Aperture and liked it but it did not run very smoothly so I have purchased LR3. The features and utilities are about the same with one exception, Aperture automatically gives you lens name along with all the other EXIF photo data (aperture, zoom, etc...). Lightroom gives me aperture, zoom, ISO and shutter, just like Aperture but will not tell me the lens make and model. Am I missing something? I looked at that lens profiler program but didnt understand why I need it (and looking at the instructions with a checkerboard and other extra steps seemed unnecessary). If the camera records the lens along with the other pertinent information automatically (it must as Aperture picked it right up), why can I not find it?

    I use a Pentax *ist DS and have a few different lenses. Some are older manual focus and a few are auto focus ones. The camera body reads the autofocus ones and whenever the photos were loaded up into Aperture, it gave the usual EXIF shot data as well as which lens was being used (whenever the autofocus ones were attached). Im hoping that LR3 can do the same thing without having to load up a separate plug in program in order to do it. I figured if the camera does it and Aperture picks it up, LR3 should too, right?

  • Macbook pro keeps saying connection timeout, and it used to connect to the internet fine. what's up, why can't it find and automatically connect to the internet anymore???

    Macbook Pro keeps saying connection timeout and it used to connect to the internet fine. What's up, why can't it find and automatically connect to the internet anymore???

    Like this: https://discussions.apple.com/thread/2775868?tstart=0  ?

  • HT4623 Why can't I find the Software Update button?  I only see About and Usage.

    Why can't I find the Software Update button?  I only see About and Usage.

    Under About, what version do you have? The Software Update option in Settings was not introduced until iOS 5.0.

  • WHAT is "Hibernate this Group" and why can't I find ANY information on this and HOW to get accidentally hibernated groups BACK???

    This is REALLY getting me frustrated! What is "Hibernate this Group"? Why can't I find any information on it? Why can't I get groups back that have been accidentally "hibernated"? There is a "moon" symbol on my upper right screen that says "Hibernate this Group" and I don't know what it does or how it works! AND I accidentally "hibernated" a group when I clicked on it too long and a bunch of "zzz's" showed up and then it was GONE! How do I get it all back? And why isn't there a tech center I can contact to help with this???

    This sounds like some third-party app or extension, because this functionality is not in Firefox by default. [[Reset Firefox – easily fix most problems]] should remove it

  • Why can't i find the airplay key on my new ipad. i have hit the home key twice and scrolled but it's not there?

    Why can't i find the airplay button on my new ipad? I've hit the home key twice and scrolled left but it's not there any clues please?

    Look through this suppport document.  You'll probably find a solution.
    Using AirPlay, http://support.apple.com/kb/HT4437

  • Why can't Firefox find the simplest sites and sites that I frequent?

    Why can't Firefox find ANY of the servers for the sites I frequent the most?
    Were you bought out by Google Chrome? This is beyond frustrating and ******* off your customers even if you are a free service is probably not a good business model.
    ''Edited by a moderator due to language. See the [http://support.mozilla.com/kb/Forum+and+chat+rules+and+guidelines Rules & Guidelines] .''

    http://kb.mozillazine.org/Error_loading_websites#IPv6
    To disable IPv6, change the preference network.dns.disableIPv6 from "false" to true . Here are the steps:
    Type '''about:config''' in the address bar, press Enter.
    Find network.dns.disableIPv6 in the list.
    Right-click -> Toggle.
    Restart your Mozilla application and try again.

  • Why can I only see iCloud Drive and not iCloud in Finder?

    Why can I only see iCloud Drive and not iCloud in Finder? The latter is not available either under Favourites or Menu>Go>...
    After a clean install of Yosemite 10.10.3 on a MacBook Pro, I chose not to upgrade from iCloud to iCloud Drive because it would break syncing with my iPhone 4. My docs are still visible in iCloud, according to System Preferences. I can access them on my iPad but I not from my MacBook Pro. Calendars and Contacts sync ok.
    I tried logging out of iCloud, rebooting and logging back in, but that did not remedy the problem.
    What's gone wrong?

    Just so I'm clear. You have enabled iCloud Drive in your iCloud preferences:
    Now, in your Finder's sidebar you still do not see the iCloud Drive showing. In the Finder's preferences is it checked:

  • HT5019 Why can I not find a miniport to external monitor cable that works? I have bought for different types, two from Apple, cost me $300+ and still have no external monitor. Help, please.

    Why can I not find a miniport to external monitor cable that works? I have bought for different types, two from Apple, cost me $300+ and still have no external monitor. Help, please.

    What have you bought?
    What model Mac are you running?
    What input sources are available on the display you are connecting it to?

  • MyRIO memory, data transfer and clock rate

    Hi
    I am trying to do some computations on a previously obtained file sampled at 100Msps using myRIO module. I have some doubts regarding the same. There are mainly two doubts, one regarding data transfer and other regarding clock rate. 
    1. Currently, I access my file (size 50 MB) from my development computer hard drive in FPGA through DMA FIFO, taking one block consisting of around 5500 points at a time. I have been running the VI in emulation mode for the time being. I was able to transfer through DMA from host, but it is very slow (i can see each point being transferred!!). The timer connected in while loop in FPGA says 2 ticks for each loop, but the data transfer is taking long. There could be two reasons for this, one being that the serial cable used is the problem, the DMA happens fast but the update as seen to the user is slower, the second being that the timer is not recording the time for data trasfer. Which one could be the reason?
    If I put the file in the myRIO module, I will have to compile it each and every time, but does it behave the same way as I did before with dev PC(will the DMA transfer be faster)? And here too, do I need to put the file in the USB stick? My MAX says that there is 293 MB of primary disk free space in the module. I am not able to see this space at all. If I put my file in this memory, will the data transfer be faster? That is, can I use any static memory in the board (>50MB) to put my file? or can I use any data transfer method other than FIFO? This forum (http://forums.ni.com/t5/Academic-Hardware-Products-ELVIS/myRIO-Compile-Error/td-p/2709721/highlight/... discusses this issue, but I would like to know the speed of the transfer too. 
    2. The data in the file is sampled at 100Msps. The filter blocks inside FPGA ask to specify the FPGA clock rate and sampling rate, i created a 200MHz derived clock and mentioned the same, gave sampling rate as 100Msps, but the filter is giving zero results. Do these blocks work with derived clock rates? or is it the property of SCTL alone?
    Thanks a lot
    Arya

    Hi Sam
    Thanks for the quick reply. I will keep the terminology in mind. I am trying analyse the data file (each of the 5500 samples corresponds to a single frame of data)  by doing some intensive signal processing algorithms on each frame, then average the results and disply it.
    I tried putting the file on the RT target, both using a USB stick and using the RT target internal memory. I thought I will write back the delay time for each loop after the transfer has occured completely, to a text tile in the system. I ran the code my making an exe for both the USB stick and RT target internal memory methods; and compiling using the FPGA emulater in the dev PC VI. (A screenshot of the last method is attached, the same is used for both the other methods with minor modifications. )To my surprise, all three of them gave 13 ms as the delay. I certainly expect the transfer from RT internal memory faster than USB and the one from the dev PC to be the slowest. I will work more on the same and try to figure out why this is happening so.
    When I transferred the data file (50MB) into the RT flash memory, the MAX shows 50MB decrease in the free physical memory but only 20MB decrease in the primary disk free space. Why is this so? Could you please tell me the differences between them? I did not get any useful online resources when I searched.
    Meanwhile, the other doubt still persists, is it possible to run filter blocks with the derived clock rates? Can we specify clock rates like 200MHz and sampling rates like 100Msps in the filter configuration window? I tried, but obtained zero results.
    Thanks and regards
    Arya
    Attachments:
    Dev PC VI.PNG ‏33 KB
    FPGA VI.PNG ‏16 KB
    Delay text file.PNG ‏4 KB

  • Why can´t  I find my 5d Mark ii in the finder when I connect it with my mac?

    Why can´t  I find my 5d Mark ii in the finder when I connect it with my mac?

    Because it is not a mass storage device that would appear in the Finder. It uses the Picture Transfer Protocol (PTP) to interface with a computer. It can be accessed using an application that uses PTP, such as Image Capture, iPhoto, Aperture, or Canon's software. These applications also support more camera-specific features than the Finder would, such as tethered shooting and possibly camera clock synchronization.

Maybe you are looking for

  • Wat is the difference in following 3 codes??

    wat is the difference in following 3 codes?? 1) <b>using write stm in select/endselect block</b> tables: vbak. data: begin of t_ernam occurs 10,       ernam type ernam,       end of t_ernam. select ernam from vbak into t_ernam where vbeln = '00000000

  • Drag and drop problem

    I have iTunes 10.01.22. I have a folder on my computer, the folder contains some MP3's of an album. Now normally I can drag and drop the album folder into iTunes and whatever amount of songs are in that folder are then added and shown in iTunes libra

  • Outputting 720p from MacBook Pro to Plasma Screen

    Is that possible? Can you output a high-def FCP project directly from a MacBook Pro via the HDMI monitor port? And how? Otherwise I'm back to burning a bad 'ol standard def DVD.

  • OMBPLUS: retrieve type of operator?

    Hello, i have to determine via ombplus, if an operator is a table, aggregator, filter and so on. For this, I'm looking for the key of that property. "OPERATOR_TYPE" is not the correct key and I don't know how to get a list of possible keys. OMBRETRIE

  • Trying to update iMac from 10.5.8 to current OS X.

    On my iMac (which has sadly been neglected) I have Mac OS X 10.5.8. Is there anyway that I can put Snow Leopard on it, so that I can continue to upgrade via the Mac Store App? On my Macbook laptop, I am running Mac OS X 10.8.2. So, at least I kept up