Why can't I find the zero order hold vi?

I want to use the zero order hold vi (see link below)
http://zone.ni.com/reference/en-XX/help/371599H-01/lvfpga/zeroorder_hold/
I have installed the FPGA module, but am unable to find this vi when I search for it. I went to Labview help and searched for the function and clicked ''Find on the palette'', but I got a message saying that it could not be found. Any ideas?
Solved!
Go to Solution.

In your project, right-click the My Computer and select New->Targets and Devices. Follow the wizard to setup the FPGA card.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

Why can't I find the color profile info in the library ?

Why can’t I find the color profile info in the library ?
It’s sometimes necessary to convert to sRGB for some applications ( internet, some beamers in clubs,…).
I convert them but afterwards it is nice to have the possibility to check this out and should be possible in lightroom, the info is present why not showing it ( it is not so easy to go in finder and look at it in info for every image)?
Since I’m always working in Adobe profile for printing and so this is important to know !
But no trace of it anywhere….
Thx for any reply.

The disconnect here is many (including me) don't reimport rendered JPEGs
into our Lightroom Catalogs. Why you are doing that is beyond me. You
have the original and can recreate any rendered file at any time.
Storing the derivative JPEGs is redundant, creates additional confusion
and serves little real purpose. Exported versions are considered
discarable by many.
Yes, understand what you're meaning. but the fact is that I started rather recently with lightroom. So my images where classified in directory's and subdirectory's...already.
I think that this is the major problem. This is always a problem when you step in a new system.
Let's say I am going to submit to a photographic society, I have an Export
preset created that exports to proper size and color space for
projection. It creates a file. I send it to the club. Then I delete it.
Why save it? I can recreate it. Then I don't have to manage it, search
for it, or worse yet, risk confusion with my original file or othe
resultant derivatives.
The fact that I like to keep them is
indeed an inborn result of the "pré-lightroom period". A bad habitude
indeed. I'm thinking now of deleting them, will maybe better. On the other side
I still have them just for me in order to know which ones I used and when.
Another bad habitude.
But
since I'm not a professional photographer I'm mostly confronted with the time
issue and it is for me easier to take existing files ready for use...
( doesn't mean you’re not confronted
with this problem
Today place for jpeg's is rather easy since the Gb's are almost free...
Same is true of a client photo. They want an 8x10. I go to the retouched
original, create a JPEG from an 8x10 preset in the proper dimensions and color space. Send it to the lab. Then, I can delete it.
One of the strengths of Lightroom is that it creates many fewer
intermediate file versions along the way toward final creation. Another
strength is that you can save (via snapshots in Develop) your
derivatives, export, and discard them without having to create, import
and manage additional files on disk. In the old days of just Photoshop
you might end up with a dozen or more files on your disk for every
worked file. With Lightroom, you only need one or two.
Will look deeper in your proposed workflow...and yes I'm comming from the old days.
That said, if you want to keep the derivatives for purposes down the road,
that is up to you but I don't understand why they need to be inserted
into your catalog.
Since my catalog is made in the time
from before lightroom I’m still having all these directory's and
subdirectory's...
Easier
for me since even with back-ups of the catalogue still afraid for crashes. And
I keep liking these directory structure because for the moment it's lighrtroom
and tomorrow it can be another program, you never know. It's like a website, "on line versoin only", big problem when a firm at some moment stop to provide this possibility.
I think I will try to go deeper in "how to use lightroom better..."
thanks
Edward De Bruyn

I have upgrade ios 6 to ios7 on my iphone 5. I do NOT like it. I want to come back to the previosu version. why is it so complicated. Why can I not find the instruction strait from apple? This is the worst possible upgrade ever.

I have upgrade ios 6 to ios7 on my iphone 5. I do NOT like it at all. I want to come back to the previous version. why is it so complicated? Why can I not find the instruction strait from apple? This is the worst possible upgrade ever. It make me think of when ericsson got sold to Sony....drastic PC change.
I would like to have simple instruction on how to downgrade.
It feel like a change that I did not ask for , ok I push the upgrade buttom, but really this is the worst update aver!
HELP!

iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB

Why can't I find the Illustrator CC 2014 toolbar on my screen on Windows 7?

Why can't I find the Illustrator CC 2014 toolbar on my screen on Windows 7? The screen resolution is 1280 x 1024.

Hi Chris,
Can you please put a snapshot of the screen so that we can know more about the issue ?
Thanks & Regards,
Raghuveer

HT4623 Why can't I find the Software Update button? I only see About and Usage.

Why can't I find the Software Update button? I only see About and Usage.

Under About, what version do you have? The Software Update option in Settings was not introduced until iOS 5.0.

Why can't i find the airplay key on my new ipad. i have hit the home key twice and scrolled but it's not there?

Why can't i find the airplay button on my new ipad? I've hit the home key twice and scrolled left but it's not there any clues please?

Look through this suppport document. You'll probably find a solution.
Using AirPlay, http://support.apple.com/kb/HT4437

Why can't i find the instagram app for ipad in the App Store?

why can't I find the instagram app in the App Store for the ipad? There is one for the iphone...

Perhaps because the "Instagram" App is optimized only for the iPhone 5 currently and there is no Instagram App for the iPad only at this time???
I don't see one listed in the U.S. App Store.

Why can't I find the pen tool in the tryout version of Illustrator CC?

Why can't I find the pen tool in the tryout version of Illustrator CC?

No clue. You've provided nearly no information.
What happens when you tap the P key on the keyboard?

Why can't I find the getting started file on my desktop?

Why can't I find the getting started file on my desktop? I know the name is different in the video, but the folder itself is not sowing up after i download it and try to create the site.

Can someone please help me with my question?
I'm trying to remove private browsing from my computer and I need to find the "MainMenu.nib" file... when I go to that directory it isn't there.
I'm running Yosemite.

Why can't Firefox find the simplest sites and sites that I frequent?

Why can't Firefox find ANY of the servers for the sites I frequent the most?
Were you bought out by Google Chrome? This is beyond frustrating and ******* off your customers even if you are a free service is probably not a good business model.
''Edited by a moderator due to language. See the [http://support.mozilla.com/kb/Forum+and+chat+rules+and+guidelines Rules & Guidelines] .''

http://kb.mozillazine.org/Error_loading_websites#IPv6
To disable IPv6, change the preference network.dns.disableIPv6 from "false" to true . Here are the steps:
Type '''about:config''' in the address bar, press Enter.
Find network.dns.disableIPv6 in the list.
Right-click -> Toggle.
Restart your Mozilla application and try again.

HT4413 Why can't I find the files and data I transferred from time machine on my new mac?

So I just got a new mac and I always backed up my old mac. I used the migration assistant to transferr all the stuff from my old mac to the new one. After it completed I tried to find all my pictures, music, and documents but couldn't. Where did all my stuff go and why can't I find it? Migration Assistant said everything transferred and went ok.

Peruse Pondini's Setup New Mac guide and seriously consider starting over. I'm a firm believer in only using the Setup Assistant and not creating a new account on first boot.

Why can I not find the primary video setting in Bios so I can change it from integrated to PCIE?

I have purchased a new video card to add to my computer which has integrated graphics. When I installed the card I got a blank screen so I removed the card and restarted the computer and entered BIOS in an attempt to change it from integrated to PCIE the problem is I cannot find the option to make the change. I can select advanced chipset but there is no primary video option to select and as far as I can tell there is no option to switch it from integrated to PCIE.... I researched this heavily and am now resorting to this as I cannot find a way to get the video card to work. I have posted the options I have in my system's Bios below. Thnks for looking BIOS Version 2.14.1219Options:Main Advanced Power Security Boot Options Exit Main:System infoDateTimeAdvancedMiscellaneous AHCI Post 1 Not Present AHCI Post 2 Not Present AHCI Post 3 Not Present AHCI Post 4 HL-DT-ST- DVDRAM GH7ON AHCI Post 5 Not PresentAdvanced Chipset Configuration Intel EIST [Enabled] Intel Turbo Boost [Enabled] Intel AES-NI [Disabled] Intel XD BIT [Enabled] DVMT Mode [DVMT] DVMT Memory Size [256mb]Integrated Peripherals Onboard SATA Controller [Enabled] Onboard USB Controller [AHCI] Legacy USB Support [Enabled] USB Storage Emulation [Auto] Onboard Audio Controller [Enabled] Onboard LAN Controller [Enabled] Onboard LAN Option ROM [Disabled]PC Health Status {Health Status info}Smart Fan [Enabled]PowerACPI Suspend Mode [3(STR)]Deep Power Off ModePower On By RTC AlarmPower on by PCIE AlarmPower on by Onboard LANWake up by PS2 Keyboard/MouseWake up by USB Keyboard/MouseRestore on AC Power LossSecuritySupervisor passwordUsername PasswordChange Supervisor PasswordBoot Options1st Boot Device2nd Boot Device3rd Boot Device4th Boot Device5th Boot DeviceEFI Device PriorityHard Disk Drive PriorityOptical Disk Drive PriorityRemovable Device PriorityNetwork Device PriorityQuiet Boot OnHalt OnExit

iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB

Why can't iTunes find the music from an external hard drive?

I moved my music to an external hard drive to free up space on my old laptop. Since I moved to a new laptop, iTunes never seems to find the music. I have to go through and manually select a song for it to find it one and then it says should it use this to find the rest of the songs. Then it crashes. I have reinstalled iTunes tonight with no real improvement. I want to be able to create a playlist to upload to my new iPad as well as updating music on my iPod but I can't do any of it. Please, any advice!

angelafromlanchester wrote:
I moved my music to an external hard drive to free up space on my old laptop. Since I moved to a new laptop, iTunes never seems to find the music.
Has the new laptop given the external drive a different drive letter?
The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
tt2

Why can't I find the field remark when I use LSMW to create customer master

I want to create customer master data with LSMW.
Object               0050   客户主记录
Method               0000
Program Name         RFBIDE00
Program Type         B   Batch Input
but I can't find the field 'Comments' which is in view general data -> address.
pls help me to find it.
tks!

Hi,
This is quiet simple.
See when you enter your Tcode in LSMW & start recording, on the first screen where you enter the customer details to create, you see a tick below "Use central adress management"
Just tick this & record you will get comment in your recording
Hope this helps you
Regards,
Dhananjay

Why can't I find the answer to this anywhere?

Hi, please help a beginner...
I'm trying to build an online catalog with PHP and MySQL, using Dreamweaver.
I have a problem with filters... here it is:
I have some variables... let's take 1 for ex. $manuf in which I want to store the manufacturer (for the notebooks table, like "acer", "alienware" etc.).
I figured I'll do the filters one of 2 ways:
1. through dropdown list/menu and I've populated the list with the values "acer" "alienware" etc.
and in "OnChange" event of the list/menu I want to assign the selected value of the list/menu to the variable $manuf.
HOW do I do this??? I can't find anything like a property list1.selected for ex. to simply write <?php $manuf = list1.selected ?>
where list1. should be the name of the list/menu (right?...)
or
2. it looks nicer with a SpryMenu.
So I have a Spry Menu like "Manufacturer" etc.
And Submenus like "Acer", "Alienware" etc.
now... when I click the submenu labeled "Acer" I can just do the php $prod = "acer" BUT HOW can I also change the menu's caption to say "Manufacturer - Acer" instead of just "Manufacturer" ??? ('cause I want people to see what filter is applied). Again, I can't find any property like sprymenu1.caption or something like that.
P.S.
regarding the list/menu... I can populate it dynamically, from the database... with the values from $manuf field. BUT they repeat, because there are more than 1 "acer" for ex. in the catalog (database). HOW can I dynamically populate the list from the database, without repeating any value???

For the time being I think I am going to start with just problem 1 because I think as I go through explaining this to you, the answer to #2 will become more clear.
Javascript is like Actionscript (Flash) and can be executed in runtime meaning that if you execute javascript on a page you can see the results immediately. PHP, on the other hand, is a preprocessor meaning that the code is executed prior to a page load and cannot be executed in runtime like Javascript can. Your mix of the two for this instance is really not needed unless you want the form to act dynamically. Because of this there are 2 ways to approach the situation:
1. If you want to stick with PHP, when you submit the form, the values of the stored will be stored in the global variables ( http://php.net/manual/en/reserved.variables.php ). Based on the method of your form will depend on how you extract the data. For instance, if your form method is "POST" and the drop-down field named "manuf" has a value of "Dell", then when you submit the form, the variable $_POST['manuf'] will be equal to "Dell".
With this example the form has to be submitted because Javascript cannot send commands to PHP once the page has been loaded because the PHP has already been executed.
2. This way is a lot more complicated so I won't go into much detail. But, the Spry Dataset functions are intended for updating data live without the need to submit a form forcing a page refresh for the PHP to execute. What happens with the Spry dataset is that you store all the information in mySQL and then the Spry Dataset will convert this into XML for you. PHP will be used to run the initial query of your database and depending on the size of your database can be used to filter the data so you do not end up with an extremely large XML file slowing your page load time. I do have a basic example I did awhile back located here ( http://www.exitplaystation.com/warhawk/trophies.php ). That used a static XML document at the time. I do have a more dynamic example. It was actually done for work, but I might be able to modify it with bogus information and upload it to show you a dynamic version. In the meantime if you want to see a professional example of this in action:
http://msn.foxsports.com/nfl/draft-tracker#round=1&team=ALL&school=ALL&position=ALL
FoxSports uses the Spry Dataset sort functions and some extra code for their live NFL draft system. Refreshes automatically and sorts from the top drop-down menus. So as you can see all of their data is loaded from their database connection and refreshed in real-time. This is a very complicated example and requires modifications to the Spry code, but it shows the power of what Spry can do.
Let me know which way you would prefer to go with this. Personally I would recommend #1 for starters until you get going and feel more comfortable with PHP and Javascript. Also if you give more a little more detail on your code I could help you implement it if you are having difficulty understanding.

Why can't I find the zero order hold vi?

Similar Messages

Maybe you are looking for