Why can't I ftp files from my workstation to ISE?

Hello,
I get this message when I try to upload the ISE 1.2 upgrade files to my ISE nodes local disk...
ISE-01/admin# Copy ftp://<my_workstation_IP_Address>/ise-upgradebundle-1.1.x-to-1.2.0.899.i386.tar.gz. disk:/
Username: rsundstrom
Password:
% Error: Transfer failed
When I enter the 'dir' command at the ISE CLI the filename appears but the the file size is 0 (zero).
I am trying to follow the guidelines for upgrading to V. 1.2. Placing the upgrade files on the ISE local disk is considered to be important.
Any ideas?

Robert,
I was having major issues with attempting to transfer update files to ISE via FTP as well. After trying numerous things, adn slamming my head into a wall for days, I was able to figure out the answer with a combination of a little guidance from here mixed with "Trial and Error" on my part.
You can view the entire topic here:
https://supportforums.cisco.com/message/4064096#4064096
The copy string that finally worked for me is as follows:
copy ftp://(username):(password)@(FTP Server IP Address)/ise-upgradebundle-1.1.x-to-1.2.0.899.i386.tar.gz disk:/
There REALLY needs to be updated documentation that explans in better detail the FTP copy commands that Cisco allows on the ISE servers, as well as the syntax.

Similar Messages

Why Can't I Copy Files from an External Hard Drive or SD Card?

Major problem here... Why when I try copying files from an external hard drive or an SD card onto my internal iMac hard drive, it doesn't work? The status bar that pops up, shows that it completes the transfer of the files to 100%; however, when it does in fact finish, the files actually do not appear on my hard drive.
Any help would be greatly appreciated. This is one of many problems I have been finding with OS X Lion and am very much on the verge of going back to Snow Leopard.
Thank you.

Have u tried the usual? Safe boot. Delete finder plist files? etc. And the drives are formatted for mac yes?

Why can't I delete files from networked computer?

I have my iMac G5 networked to a PC. Lately, when I try to delete PC files and directories from the Mac, I keep getting the error message:
"The operation cannot be complete because you do not have sufficient privileges for some of the items." It will not allow me to move files from the PC directories onto the Mac desktop either.
I have no problem in seeing all of the files from either computer. I can also delete Mac files while working at the PC. I have checked all connections and configurations. Is there anything special that I should check.
Thanks
Herschel

Are you using an Admin account to do these things? I get similar messages under those circumstances but when I use a regular account I can perform the edits (as long as I can see the content). I have no idea why this is so - but essentially you are using your OS X's server capabilities that are built into the non-server edition of OS X.

Why can't i drag files from harddrive to playlist?

I run Windows 7 64 bit
Itunes 12.1.1.4
I can't drag files from a harddrive folder to a playlist anymore.
Anybody have a fix for this?

UlleChamp wrote:
it stopped working yesterday. My computer froze, then after a restart all my playlist's were gone.
See Empty/corrupt iTunes library after upgrade/crash.
Not sure why you're having trouble adding to the playlists then, but restoring your previous library may help.
tt2

Why can't I open files from ACR to CS5?

I have been using CS5/Bridge/ACR for a year now and all of the sudden, I cannot get the RAW images from ACR into CS5. I always open my RAW files from Bridge, make my adjustments in ACR, then select all and open images into CS5. This has always worked just fine, but recently only a random number of images will open, if any at all!
For example, If I select 10 images to open in CS5, it may be 4 that open, or it could be 8, or it could be 0. I haven't done anything new to my computer. I have uninstalled photoshop and reinstalled it twice and that hasn't helped.
I am so frustrated. I thought I purchased a quality product (which I have loved until now since I can't even get my files in to use the program!) and am so dissapointed that I can't use it anymore.
Hopefully someone can help me. I really want to use photoshop again!

You could try to reset Bridge preferences. Hold down the Ctrl key and start Bridge. You should get a reset window with 3 options.

Why can't I download file from any websites?

Whenever I try to download files from filesharing sites like mediafire, I click the download button and the page appears to be loading and nothing happens.
After several tries, I found out that while the page is loading, it is actually downloading the file because the time it takes for the page to load before the "open" or "save file" windows come out depends on the size of the file. And immediately after I click "save file" the download is done, and I can open whatever I downloaded. The time ranges between 5min to 30min depending on the file size.
Usually the "save file" window will display immediately when I click on the download button, the the fire fox download window will show the progress of the download and % of completion. But no, for me nothing appears in the download window, and I don't get to see the progress of my download until it is apparently "completed" after the webpage finished loading.
I have tried every solution that I know, cleaning my browser history and cookies, resetting firefox, clearing up my computer's registry, even did a clean reinstall of firefox, wiping everything including my bookmarks, but none of these solves the problem. I am also pretty sure that my firefox extension are not the ones to blame as I did do a test download after a clean reinstall, which did not work as well.

My problem is fixed after I set the firefox connection settings from "use system proxy setting" to "no proxy". After setting to no proxy, the downloads happens as it should.
but my question now is what is system proxy? and what is the difference between using these 2 different options?

Why can't I open files from pages and numbers on my mac, I can open them on my macbook air

When I try and open a file from either numbers, pages and keynotes on my mac I get a message telling me "The file “Essential Skills Module 10 Presentations.key” couldn’t be opened." I am still able to open them on my MacBook Air and iPad. Can anyone help me with this?

looks like the file is corrupt

Why can't CS6 open files from CC9?

We receive files from a designer in CC9.2 version and I can't get the idml to open in CS6

Nothing. The cursor just spins and spins and spins. I have to close CS6 through the task manager.
Marty Wolford Chief Financial Officer
517-664-2770 x200
cid:[email protected]
Fax: 517.664.2787
Email: [email protected]<mailto:[email protected]>
Web: www.regency-group.com<http://www.regency-group.com>
Regency Insurance Group
1690 Watertower Place Suite 500
East Lansing, MI 48823

Why can't I transfer files from usb internal hdd on my mac?

I am trying to restore a back-up (not via time-machine) from an external HDD dock, I've put an internal HDD in there.
I'm constantley confronted with this error: "The finder can’t complete the operation because some data in "8A5A0887.MOV" can’t be read or written. (Error code -36)".
I've tried to check the do not read/write radio button, but it's not even on. I'm afraid my disk is broken but I need those files really bad. Any ideas on transfering the files from the HDD?

looks like the file is corrupt

Why can't I add files from my MacBook Pro to my external hard drive?

I re-named my external hard drive on my PC, and now I cannot add files from my Mac to the hard drive. How can I add files again? Do I need to reformat my hard drive?

Since you mention you used the external harddrive with your 'PC', I assume that it was NTFS formatted. By default Mac cannot write to NTFS only read it.
To make sure: go to. Disk Utility (while the drive is mounted), select the drive and look at 'Format'. That should tell you the format type of the drive.
If you are looking for third party solutions, try:
http://www.macupdate.com/app/mac/24481/ntfs-3g
http://www.paragon-software.com/home/ntfs-mac/
However, know that they are not supported by apple and won't be the best solution. The best cross platform solution would be to reformat the drive with exFat (you can do this through disk utility), just make sure you backup your data before doing this. Both Windows and Mac can write to exFat and it does not have file size limitations as Fat32.

Why can't Lightroom open files from OneDrive when I try to add them to the catalogue?

It finds the files, says that they aren't available for preview, and if I try to import them anyway, it says that it can't open the files. They are jpeg from IOS and are only available online.

Yes, it turned out to be a version issue. The current version number at the time was 2014.8.2.something. My version was one version older. Pays to update right away!

Why can't I copy files from Finder to Time Capsule?

I'm trying to do basic copy functions from Finder to Time Capsule and I can't copy/paste or drag/drop any files from my MacBook to TC. The paste function is greyed out. TC is connected and does backups fine from Time Machine. Is there some setting I need to change?

You are trying to add a folder into the network...
You have to click on "shared" in HD then the name of time capsule and a window will open with a folder called "Time Capsule." That window is the network, not the time capsule. You have to click on the "Time Capsule" folder to enter it. You will see a file ending in "arsebundle," that is your backup. You can now add another folder.

Why can't I transfer files from my MacBook Pro to my external HD?

Hello,
I was transferring files from my macbook to my Buffalo HD-PNTU3 when it was accidentally removed improperly; Once I plugged it back in I could no longer transfer any files the cursor would turn into the round banning icon and wouldn't take the command.
After reading some posts in the community I tried repairing disk permissions in Disk Utility but it was in vain. Any propositions?
Thank you in advance,
Likolette

Hello Likolette,
Thanks for using Apple Support Communities.
From your post I see that you're unable to move files to your external hard drive ever since it was unplugged before being ejected. To start troubleshooting this issue, I'd like you to please repair the disk using Disk Utility.
Disk Utility 12.x: Repair a disk
Cheers,
Alex H.

Why can't i move files from one folder to another by sliding them?

help. i am trying to move files from one folder to another. but i cant slide them by clicking on a file and sliding it to another place. any suggestions? thank

Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.)

Why can't I copy files from my external hard drive - error code -50.

I sm trying to back up an external hard drive to a network drive. Some files copy but not all;. SOmetimes a folder seems to have copied but then I see that most of the files inside have not. And sometimes I just get 'An unexpected error has occurred'. Error code - 50.
I need to have a back up copy of the files on this hard drive. How can I stop this happening and copy files properly and securely?
The external hard drive is a LaCie bought from Apple, share formatted FAT32.
The network drive is a WD MyBookLIve Duo which WD tell me should work equally well with any operating system.
Please advise. I need to archive a security copy of this data urgently
John Wood

Have u tried the usual? Safe boot. Delete finder plist files? etc. And the drives are formatted for mac yes?

Why can't I ftp files from my workstation to ISE?

Similar Messages

Maybe you are looking for