Why can't i hear when I receive a call

I bought an iphone4 received it yesterday. Set it up as usual. But I can't hear who is calling or if I place a call I can't hear anything. But if I  turn on the speaker
I could hear perfectly. I there something I am missing? Or is the phone deffective?

ur might pull of the sounds X)?

Similar Messages

  • Why can't I hear when I make a call?

    Whenever I get a call on my iPhone 4, I can't hear the person on the other line, also whenever I record a video, theres no sound. Is it the internal mic?

    unsure. try making a voice memo. can you hear yourself? that means your mic is working, so it's likely not a hardware issue. if the mic doesn't work and you can't hear yourself - you need a repair

  • HT3310 Why can't I hear when using my ear plugs on my I-pad

    WHy can't I hear when using my apple ear phones on my I-pad?

    Make sure that they are inserted all the way into the jack. It takes a firm push to insert them all the way.

  • Why can't I hear the person I'm calling???

    Ok I know the subject line sounds like I'm a couple sandwiches short of a picnic.  But honestly just a couple days ago my Blackberry phone rang, I go to answer the call and I can't hear the caller on the phone, but they can hear me.  The only way I can have a conversation with anyone is by using my speaker.  Does anyone have any suggestions as to why this happening and how to correct the problem???

    I spent sometime with their on-line techs, they restored my phone to factory settings but the same problem was happening.  Because I've still have a warranty on my phone, I was able to have it replaced.
    If that happens to be your case, remember to back up or sync your phone with your computer.  You'll loose all your information if not.  Must be a batch of defective phones, we must be the lucky ones to have 2 of them huh?
    Good luck!

  • Why can't I hear the phone ring when I call somebody, but if I put the speaker on it works

    Why can't I hear the phone ring when I call somebody, but if I put the speaker on I can hear the ringing?

    Don't jump all the way to restoring just yet.  Check to make sure there's nothing in the headphone jack, and nothing covering the microphones (including the noise cancelling microphone at the top next to the headset jack)
    1. Restart the device. http://support.apple.com/kb/ht1430
    2. Reset the device. (Same article as above.)
    3. Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    4. Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • I don't always hear or feel my phone when I'm in my workshop. Is there an app that can ring a bell or flash a light on and off when I receive a call or text?

    I don't always hear or feel my phone when I'm in my workshop. Is there an app that can ring a bell or flash a light on and off when I receive a call or text?

    There are a number of hardware devices that you may want to look at. Some of them require that the iPhone be placed into a "base station" in order to work. Following is one set of possibilities: http://www.harriscomm.com/index.php/equipment/cell-phones-accessories/cell-phone -accessories/loud-ringers.html
    If you do an internet search for something like "ringer for cell phone in home" you will find a variety of others.

  • My iphone died and when I plugged it back in to charge it when it powered on the screen remained black.  I can hear when I receive a text and a hear siri.  I have tried holding down the sleep and home button

    My iphone died & I plugged it back in to charge when it powered on the screen remained black.  I can hear when I receive a text and siri.  I have tried holding down the sleep and home button and restoring in itunes neither worked.  The screen on the phone is cracked but has been working fine until now.  Please help!!!

    Here's how to perform the restore:
    HT1414
    If you can actually get to restore, maybe (I estimate a 0.01% chance) you'll be able to do a backup before the restore.  Actually, from the symptoms you describe, I suspect a restore won't work either and you'll need to do a recovery.
    Just in case, if you need to recover (restore fails), here's how.  Note you may have to try to get into recovery mode more than once.
    http://support.apple.com/kb/HT1808

  • Why can I not hear my iPad 2 "click"off when I close cover

    Why can I not hear my iPad 2 "click"off when I close cover

    Hi you are not going to believe this but under "ringer and alerts" I decided to increase the level of sound (was set half way) once I did that it was like it "released" it!!  The cover now clicks off even when I returned setting back to original place.
    Thanks so much for your hep.

  • HT201401 When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't h

    When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't hear the sound menu.
    - During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons. But when the conversation is over, the bar disappears again.
    - With the headphones, everything is ok!
    - I also noticed (only a few times) that when I do a silent to ringer mode, the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
    I don't know what is problem,because the speakers work.

    Hello jam5064,
    We've an article which provides tips that can help get your iPhone working correctly.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Cheers,
    Allen

  • Why can't people hear me when they call me?

    Why can't people hear me when I answer the phone?

    I've been having the SAME problem.  I've made 2 trips to the "Genius" bar and they can't seem to find a fix.  It will work for a few minutes after I do a software restore and then *poof* suddenly stop working altogether.  Nobody can hear me although I hear them perfectly fine... and it doesn't matter where I am or if I'm on bluetooth, speaker phone, iPhone, etc.  I am frustrated along with you Kathiem.

  • Why can't people hear me when I answer a call?

    When I receive a call, there is a long delay before the caller can hear me.

    After getting off the phone with apple support, they've given me a fix. Basically, there was some problem with my hardware settings so they told me to reset the PRAM. Basically, just hold down OPTION + COMMAND + P + R at the same time right after you hit the power button and hold those suckers down until you hear your computer chime twice. Then you let go and then you can make a call and everything just works great. WEIRD!
    Great feature, though.

  • Why can't I hear anything when on a phone call?

    why can't I hear anything when on a phone call?

    New phone? Peeled off the protective plastic from the face of the phone?

  • Why can I only hear my calls through the speaker?

    Why can I only hear my calls through the speaker?

    Because your receiver may not be working anymore. Use http://support.apple.com/kb/TS1630 to troubleshoot this

  • TS4185 Why don't I get a ring tone or sound when I receive a call on face time?

    Why don't I get a ring tone or sound when I receive a call on face time?

    On a Mac computer the Facetime ringtone is VERY weak, even with the volume turned up. If you have your audio level adjusted to a normal level you may not hear it. A number of people have complained about it on this Facetime for Mac forum. On my iPad the alert tones when receiving a FT call is much more robust.

  • Why can I not hear the person I am video chatting with?  They can hear me.

    Why can I not hear the person I am video chatting with?  They can hear me...

    Hi,
    There can be several reasons.
    1) They have their Mic Off.
    In iChat > Video Menu the Microphone Enabled (or Audio Chat Enabled in Lion) needs to be ticked.
    2) the System Preferences > Sound > Input tab Volume is not high enough ?
    Slide it to the right (their end)
    2a) the Mic selected here is not the one select in iChat > Preferences > Video section > Microphone drop down.
    3) there is an issue with the speed differences in the internet services you both have.
    If they are fast and sending lots of data and your end cannot buffer fast enough frame get dropped to smooth out video.  There comes a point when the audio can no longer keep in sync and is dropped as well.
    In iChat menu > Preferences > Video section > Bandwidth Limit set 500kbps at both ends
    This also smooths out ISP variances.
    4) after that it tends to be combos of things such as Processors involved, the Speed of those Processors and the speed or bandwidth available to the computers involved.
    10:24 PM      Wednesday; February 29, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for

  • Display multiple combination of values all at a time in the planning layout

    Hi, we are on BW 3.0B and SEM 3.1B. We've 2 characteristics "COUNTRY" and "CONTINENT" in planning level and package. in the planning layout, we had placed "CONTINENT" in the lead columns and "COUNTRY" in the header are and COUNTRY is hidden. Now, whe

  • BT Infinity Connection Issue/ frequent ping latenc...

    Hi. I'm getting frequent latency over past few month. had Already spoken to agencies about the issue, but no reslovation appeared. So, hopefully, I can get some answer here. Btw, I already tried to switch between channels, reset to factory setting, t

  • Best (Reliable for the Price) Firewire 400 External Hard Drive for iMac G5?

    Howdy, I have an iMac G5 2.0 GHz (non iSight) running OS 10.4.4. I am looking for an external hard drive with around 250 GB in capacity with a Firewire 400 connection. I am looking at the Lacie FA Porsche 250 GB, Lacie d2 250 GB and the Maxtor One To

  • Connecting my MP3 Player to a Ste

    I want to connect my mp3 player to my "CX-CD375 Coby Micro Stereo System" but the only jack it has is a headphone jack. So I can't connect it. Or unless there's another way. I already tried a 3.5 mm to 3.5 mm cable but it didn't work. <IMG height=49

  • I cannot watch support-videos although I have already installed QuickTime

    I have got Windows 7 and I want to learn about ITunes because I have just ordered an IPot and next week I will get the new IPot. I find it a goot idea to watch the videos about the first steps with ITunes. Startin the video I was told to install Quic