Why can't I import DV files into iMovie 09?

Help, I have mpeg files from a Sony Handycam, and I want to use them in iMovie 09. I have downloaded MPEG Streamline to convert them to DV files and I have Quicktime MPEG2 installed, which I bought from apple. The files are converting to DV ok and they were importing into my movie project. However, suddenly I started getting a message saying that the files could not be found, even though they were on the desktop and iMovie has deleted all of the film that I had imported and will not import any at all now.
What am I doing wrong (besides using a Sony Handycam of course)? Is there any way around this?

Hi Jeff,
Just came across your posts, so sorry about the delay in responding.
You said:
I want to tag on with a follow-up question because I can't figure out how to post to the group
To start a new post with your own topic, when you first come into the iMovie Discussion page click on one of the iMovie headings, such as iMovie '09, iMovie '08 etc, depending on which version you want help. Then click on "Post New Topic" just above the listing of Topics.
I'm not sure what to suggest regarding your DV files being greyed out. File>Import - Movies should enable iMovie to see the DV files, provided your external FireWire drive is connected. Try dragging one of the files to your Desktop, then importing from there.
I haven't used DV with iMovie '09 as I mainly shoot with my Sony AVCHD hard drive camcorder now. I use iMovie HD 6 for my older DV projects, but am considering switching to iMovie '09 for any future DV projects that may arise (depending on possible quality issues).
If you don't have success with importing the DV clips, try converting them to AIC or H.264 using MPEG Streamclip, as discussed earlier in this thread.
Sorry I can't help further. If I think of anything useful, I'll post back. It may be better if you raise your own question in the appropriate forum (as I described) - you mentioned you were using iMovie '08 (but do have access to '09). Perhaps try the '08 forum first.
John

Similar Messages

Why can't i import .mov files into imovie

Everytime recently I've tried to import a .mov file into imovie, its come up with the optimizing video box but nothing happens, I used to import straight from the camera, but I've recently emptied my camera onto my hard drive after a trip to New Zealand and now, when I have tried to import the footage from my hard drive, it does the optimizing video freeze on me. I would like to be able to get these movies into Imovie without having to pay a rediculous amount of money for some little converting program. I originally bought a apple computer, because I thought everything worked with each other, but now, I'm not so sure about that anymore.
Also, I've tried MPEG streamclip and all that did was either freeze on me or make the video size smaller, as in, the sides were pushed in and it ruined the video.
Camera: Canon HD Legria HFR38

What codec are the files? .mov is a container that can house many different video codecs.
Is your camera supported?
iMovie 11 - cameras supported:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie 9 - cameras supported:
http://support.apple.com/kb/HT3290?viewlocale=en_US

Why can't I import DV files into iMovie 11?

This is more a curiousity, because I'm working in iMovie 6 HD, which I know well. But I wanted to play with iMovie 11 effects, and could not import my DV clips into the program. I thought iMovie 11 supported DV clips. I know I can use Streamclip to alter, but don't want to, since I wanted to interchange the clips from iMovie 6 HD to iMovie 11.

If you have an iMovie 6 project you want to use in iMovie 11, click FILE/IMPORT/iMOVIE HD PROJECT

Why can't I import .jpg files into PRE 9 slideshow project?

I have a Windows 7 computer and use Photoshop Elements 9 and Premiere Elements 9. I recently completed a slideshow for my father's 90th birthday in Photoshop Elements that contains about 360 photos, 12 songs/partial songs, and lasts 24 minutes. My intention is to burn it to a DVD so that it can play on Windows and Mac computers, as well as on televisions in DVD players.
When I tried to import the project into Premiere Elements I got an error message: "Adobe Photoshop Elements Slideshow Import Error: Following file formats could not be imported in Adobe Premiere Elements - .jpg."
From a little digging I have done I saw a post that said that my photo files have to be: 1) 24-bit RGB color, and 2) no larger than 1000 x 750 pixels. If this is true, then many of my photos have too many pixels, which must be causing the error message. Does anyone know if this is correct? If so, is there any way that I can fix my problem without going in to each photo file and reducing the size of the pixels/file? I am also wondering if upgrading to the most recent versions of Photoshop Elements and Premiere Elements could help me. Thanks very much in advance for any advice or suggestions.

welcome HarleyQ to the  boards ...
avi and mov are socalled containers, some say "wrapper"; inside such a container are all kind of "codecs" (formats...)
iM is meant to work with miniDV camcorders; these use a codec called dv..
so, iM prefers a dv (inside a mov.. or an avi, if the file is made on a PC...)
QTpro allows you, to look inside an avi (or mov), and looking for the used codec; QTpro also allows the conversion of many codecs into dv.. but not all; you can teach QT new tricks, by installing plug-ins, codecs for divx, wmv, ...
goto www.perian.org, and install that plug-in.. probably, it helps to handle your avi................

Why can't I import MP4 files into Premeire Pro?

I am on my MacBook pro using Premeire Pro CS6. It won't let me import MP4 files. Please help!
- Andrew

Analyze a clip and post a screendump in treeview with the program below.
MediaInfo Windows
MediaInfo Mac
@ NobeKaycee, please start your own thread in this forum.
Premiere Pro CS4 & Earlier

TA22875 Why can't I drag MP4 Files into Imovie?

I'm trying to frag MP4 files into I Movie and when I release the mouse it just returns them to where they came.

OK
We here are not Apple or employed by them - the thoughts and wisdom of Apple is very occult to many of us !
We are as You - Users and trying to be of help for other users !
The thing is - I don't know about Codecs, and please take this the right way when I say - I'm not interested in Codecs.
I just want to drag my movie files taken in whatever format I take them in and drag them into Imovie to work on them.
mp4 is a fairly common format?
then I have very little possibility to be of help - as I only can guide You a bit of the way to understand and work around this Problem - I never denied it to be.
But it seems that every Camera company makes there own solutions and to make Video editing programs or DVD authoring ones that can use every strange Video Codec availably - is impossibly - Not even FinalCut or Avid or Adobe Premiere can do this.
.mp4 - is no more Video Codec as any folder or hard disk - and tell that my material is on a hard disk, doesn't help us in understanding where it goes wrong.
So if You want to get this to work - then You need to set of a minimum of interest in howto get it right.
To find out the Codec
• Open the file with QuickTime-Player (as it can open many many more Codecs than iMovie can use)
• here open Inspector [cmd+I] and read
Video Format (Codec) : nnnnnnnnnnnnn
Frames per second : YY.yy fps
What does they say ?
If You feel offended and don't want - There is no solution as I know of.
AND - I have no intention to offend at any cost - but need info (and so does the others here too) to be able to reach out a hand
Yours wanting to be of more help - Bengt W

Why can't I import .MOV files or Imovie project?

I converted a Power point presentation to a .mov and FCPX wouldn't recognize it. I got an alert that there were no importable files.
I did import it into IMovie, and could work on it there, but Imovie audio implementation is so bad that I didn't want to even mess with it, so I tried to import the project into FCPX form an IMovie project but it came up blank.

I merely saved the PPT with its timings as a .mov from PowerPoint for Mac.
FCPX wasn't able to recognize it, but IMovie was. I merely did a straight import
It was about 30 minutes long. The audio didn't transfer however, so I was going to use Final Cut to add it.
The information I got from the quicktime inspector was:
640 x 480 pixels (Actual)
218.65 kbit/s
33.8 MB0.03
Apple Animation, 640 x 480,Millions+

Why can't I import itunes files into garageband 11?

I am trying to import songs or parts of songs from iTunes into GarageBand so that I can create some ringtones.
GarageBand (11) is not allowing me to drop & drag songs to it!?
The songs I am using ARE NOT protected. Some have been purchased, but I always find the 10-20 seconds that I want first, go into the get info/options of the song, choose the timestamp for the potion of the song, & then create an AAC version of the snippet. I then wo,d import the smaller file of the selected part of the song that I wanted.
I previously had been able to. Now I cannot? I used to also us mp3s, but recently read in a forum that they needed to be AAC files.
Anyone else have this issue? Anyone know a solution?
It use to be so easy to create ringtones. Now GarageBand won't let me.
Please help!
-Harty

@LeonieDF: What is "hidden user library"? Where can I find that?
I meant the your User Library; it depends on the operating system if it is hidden or not - since MacOS 10.7 Lion the User Library is hidden.
The "Preferences" subfolder you need to access is located in
Your Home Folder -> Library -> Preferences
If you are using MacOS Lion you access this folder using the Finder's Go menu:
Finder -> Go -> Go to Folder
Then hold down the "Option" key, until "Library" appears in the drop down menu, select "Library", then proceed as above.
Regards
Léonie

Why can't I import .scc files into CS6?

The manual clearly states: "Premiere Pro supports importing Closed Captioning files in .mcc, .scc, .xml, or .stl filename formats."
I've got .scc files, but the File > Import does not see them. When I import the folder containing them, the error says they are not supported.
Very frustrating!

The Closed Caption workflow is a bit different in CS6 then in CC. In Premiere Pro CS6 you actually attached the CC file rather then imporitng it. Here's how:
Select the sequence, and then select Sequence > Closed Captioning > Attach File. To display attached closed captions, go to the Program Monitor's wing menu and select "Enable" under the "Closed Captioning Display" option.
Best,
Peter Garaway
Adobe
Premiere Pro

Why can I not import PSD files into Adobe?

I downloaded a PSD opener to validate if the files could open and they were able to open successfully. Could it be the PSD file, I'm trying to open was save on a MAC computer, which connect link with Windows....
Please help , small business owner and need to start printing my marketing material.

In the Control Panel under Appearance and Personalization>Folder Options, make sure Hide extensions for known file types is unchecked
Then right click on one of the psd files, choose Properties>General and paste a screenshot of what you see in that dialog.

Why can't I import my DVD into iMovie?

I transferred some old Hi-8 videos to DVD at a commercial transfer place. They burned them onto what looks like a normal Sony DVD-R. I've tried saving these to File using both Toast and Handbrake, but in both cases iMovie refuses to let me open them in it, or to move them into it. What can I do?
I'm desperate for a good suggestion!!
Thanks

Are you refering to a Mac or an iPad/iPhone?
This is the iPad iPhone forum, so I can ask for Apple to move this if you want information for a Mac.
iMovie iOS cannot edit from DVDs.
You will have to convert the video to the same format as iPhone / iPads record in (h264/aac).
I believe that the same is for iMovie Mac.
You need to convert the video to a format that can be edited.
So I hope you got the Hi-8 converted to DV or better format, and then burnt to DVD as Data.
If you just got a DVD video then you will have to convert it again.
Say to DV Qucktime.
Handbrake can do this, you might have converted to a format iMovie does not like.
Try a few different video formats.
Quciktime DV should work well.

Why can I not import aif files to garage band?

Once I have created an aiff file in iTunes, why can I not import those files into Garage Band? I'd like to be able to edit some of those files.

I go to garage band and click on create a new project, then browse through the finder and files I want to import are all grayed out -- aiff AND wav files.
You first need to create a new project - in the "new Project panel" select a template (Guitar, piano, ...), not "Open an existing file".
When the project window opens, drag your aiff or wav file onto an empty space in the Timeline, or open the Media Browser from the footer bar in GarageBand and import an aiff song from your iTunes Library.
Regards
Léonie

I have imovie and my files (movies) open. Why can't I drag the clips into iMovies?

I have imovie and my files (movies) open.
Why can't I drag my clips into imovie?

Drag and drop doesn't work - instead do a File -> import -> movies and select from there.

Why can't i import AVCHD files via the Media browser?

Why can't i import AVCHD files via the Media browser ? (Right click on the AVCHD file and imported, got the "format not supported" message.) I can import through the File-Import way ( I can get down tot he BDMV folder and mts files) but read using the Media Browser is the preferred way.

No you need the private folder. This will open in the Browser.
Dont open just click.

Why can't I import mpg files to convert to .mov files?

why can't I import mpg files to convert to .mov files?

You'll need to clarify your question. MPEG-1 or MPEG-2?
QuickTime Player X or QuickTime Player Pro 7.6.6?

Why can't I import DV files into iMovie 09?

Similar Messages

Maybe you are looking for