Why can't I open InDesign Docs in Bridge since Installing Snow Leopard?

I have CS3 Indesign. I have recently installed Snow Leopard. Since doing that I am unable to open Indesign files within Bridge. I get a very strange message that says 'missing required parameter 'from' for event open. What does that mean and can I fix it. If I drag my document to my desktop, most of the time it opens but sometimes it does not. I have to go up to the file menu and open from there. Is it a Bridge problem or is it an InDesign problem. Very annoying! Does anyone know if there is a fix for this?
Also since installing Snow Leopard, I am unable to open multiple files in Photoshop. Once again I am doing this from Bridge.
Any information would be most appreciated.
Lynda

Does this older thread http://forums.adobe.com/thread/486185?tstart=90 solve your problem? Apparently, some characters are not (anymore!) allowed in file names.

Similar Messages

  • Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D?

    Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D dozens of times?  I have never had any where near this amout of trouble with all my other Canon digital cameras. 
    <Removed by Moderator>

    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Mylenium

  • Since installing Snow Leopard and Lion two weeks ago, my iTunes program opens seemingly at will.  It usually starts playing music, too.  What is causing this?

    Since installing Snow Leopard and then Lion on my Intel-based iMac two weeks ago, my iTunes program seems to open at will whenever the computer is on.   It often begins playing music, as well.  What is causing this and how do I make it stop?

    There are ways to minimize, mitigate, and help avoid a lot of problems.
    Bootable backups.
    Zeroing a drive twice before using, and format it with SL DVD Apple Disk Utility for sure.
    Even a clean install should import old apps without having to reauthorize.
    If you must do an upgrade, do it from the SL DVD, after repairing the drive and be sure to use the SL version of Alsoft Disk Warrior (4.2).
    Wait six months before jumping on a new OS.
    10% is still too many. Yes, it is more sensitive to RAM and hard drive errors, doesn't like some controllers; most ext hdd cases; and enough software to make for test-only status. And it only IDs some known incompatible applications, drivers, extensions, etc and does not remove even those always in best manner.
    Plus, there are problems with the new Rosetta and the cache files it now uses. So some apps and plug-ins will cause more trouble. Not all are ready. Good reason to hold off for the months it takes.
    Other devices act different as far as on/off behavior.
    (Migrating from G5s to Mac Pro can cause all kinds of problems, weird behavior, sluggish system, and why anyone that went down that road was strongly recommended to NOT use Migration Assistant for any of their applications, and to ONLY do clean/fresh installs of any apps. If you skipped that day, didn't read the Guide to M.A., or didn't want to do fresh installs then, your system could have been on borrowed time. If you did do clean install of applications, great.
    Installing SL can result in a corrupt directory - I think and it "seems" to be happening, but no real proof, just gut feeling and instinct (underlying file system problem? weak sectors that pre-existed waiting to happen?).
    Remember all the "there just aren't a lot of 64-bit drivers" for Vista and XP? it's come home to roost.
    ... my guess is not enough incense and offerings. To hop into TimeMachine and SuperDuper backup images and pull the 1TB for another day (week, month, year).

  • I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3.  How can I get my scanner to work?

    I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3. I did get the printer to work after downloading the printer software from Apple. I used to have 10.4.1.  How can I get my scanner to work?

    Check here to see if there is an updated driver available for it:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • Why can't I open a lot of documents since yosemite. They are in grey

    Since I installed the last version of OS X on my Ipad, I could not open a lot of documents on my Mac. I thought this problem would be solved when I would install Yosemite on my mac but this is not the case.
    Why are so many documents in grey and why can't I open these documents on my mac with yosemite ?

    Tell your friend to go to bit.ly to create a 'short URL' for that address.
    They can send you that & you shouldn't have to worry about the SMS or any other messaging size limitations.
    NOTE: there are many other URL shortener services…
    http://google.com/search?hl=en&q=URL%20shorteners

  • Can't open Word or Quark Xrpress after installing Snow Leopard 10.6.8

    A few days ago (30th jan), I Installed Snow Leopard 10.6.3 & then it updated to 10.6.8. When I tried to open Word 10.1.0 (2002 version) it opens a blank page but doesn't allow me to save it. If I open an exisiting file Word shuts down. Ssame with Quark Xpress 6.50...

    Security Update 2012-001 Bricks Rosetta programs
    Restore method.
    #1 Backup your personal data off the machine.
    Backup files off the computer (not TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. That's all you need to do at this time, disconnect all drives now to prevent mistakes.
    #2 Try Restoring from a TimeMachine or option bootable clone
    If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from.
    Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
    #3 Reinstall OS X 10.6 from disk
    If no TM or bootable clone then:
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility to >Repair Disk and Permissions  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: If Disk Repair gives a error that is not repaired, then you have to consider erasing the drive (with Zeros) and try reinstalling 10.6 fresh or replacing the drive.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    #4 Update to 10.6.8 without Security Update 2012-001
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #5 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
    If you get gray screen at any time when booting (possible it might occur when you reinstall old programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    Further Reading below:
    #6 Learn how to have a OS X drive restore ability using TimeMachine or cloning software
    Learn how to clone here
    http://www.bombich.com/get_ready_for_lion.html
    TM help here
    http://pondini.org/OSX/Home.html
    #7 Make copies of your original Snow Leopard
    Learn how to make copies of your 10.6 disks here
    http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
    Learn how to make a bootable SL USB
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    #8 Deciding on upgrading to Lion?
    Learn which programs ARE NOT compatible with Lion
    http://roaringapps.com/apps:table
    #9 Unverified hacks
    Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
    You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
    The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
    https://support.apple.com/kb/TS2570
    If at any time you feel this is beyond your capability, please seek local professional assistance before you lose your data.
    If you don't have any backup, please maintain at least a TM drive, just hook up a new blank external drive and TM will ask you to make a backup, takes some time so let it work.
    If your a bit more skilled, a option bootable clone is much superior than TM drive.
    Good luck
    <Edited by Host>

  • Why does my DVI to S Video adapter not work on my Macbook Pro since installing Snow Leopard?

    The Apple DVI to S Video Adapter worked before installing Snow Leopard.  Now I just get a blue screen.

    .wpl appears to be a Windows Media Player playlist. I can find no conversion software for that, and Windows Media Player is not available for Mac anymore.
    If you can persuade him to download iTunes and create the playlist as mp3 in a iTunes playlist, or even just burn the base mp3 files to CD as a data disc, that's about the only solutions I can suggest.

  • I just install snow leopard, and quicktime wont open or do anything, i just install snow leopard, and quictime wont open or do anything

    hello i just install snow leopard, and it seems that it did not istalled ok, and when  tried to open quicktime it wont do anything

    Have you updated it by downloading the Combo updater. 
    http://support.apple.com/kb/DL1399

  • Why can't I open word docs from mail anymore?

    Am on 10.8.2 on Macbook Air and doc and docx attachments tell me to choose application to open the doc with and won't open when I choose "Word"
    These used to be opened automatically by Word, not I have to manually choose Pages as the only option
    Am I missing something?

    Csound1 wrote:
    Andy Mt P wrote:
    Don't see how I can choose the file from within Word as it's not saved anywhere?
    I have now discovered if I drag the file from mail on to the WORD icon in the doc it will open....seems much clumsier than the old option of clicking on the file to open it
    Opening attached pics seems to require the same action as well using iphoto.
    A bit of a step back in my opinion....
    Save the word file from the email to your Mac (have you never saved an attachment before)?
    Post back when you can do as I asked you to.
    And remember that we are trying to find out what is wrong, don't be so snappy!
    haha...point taken. Wasn't feeling 'snappy' when I typed it, not intended as such...!
    If I save it somewhere as you suggested I can then open it
    also, as I mentioned if I drag the doc onto WORD in the dock it opens that way as well

  • Why can't I open Word doc. attachments I receive in emails?

    All of a sudden, I can no longer open email attachments that I receive as Word documents.

    Csound1 wrote:
    Andy Mt P wrote:
    Don't see how I can choose the file from within Word as it's not saved anywhere?
    I have now discovered if I drag the file from mail on to the WORD icon in the doc it will open....seems much clumsier than the old option of clicking on the file to open it
    Opening attached pics seems to require the same action as well using iphoto.
    A bit of a step back in my opinion....
    Save the word file from the email to your Mac (have you never saved an attachment before)?
    Post back when you can do as I asked you to.
    And remember that we are trying to find out what is wrong, don't be so snappy!
    haha...point taken. Wasn't feeling 'snappy' when I typed it, not intended as such...!
    If I save it somewhere as you suggested I can then open it
    also, as I mentioned if I drag the doc onto WORD in the dock it opens that way as well

  • Why can't close open multiple docs in Word 2010 in multiple windows while having the option to close them out while keeping Word open?

    End User of mine is wanting to open multiple docs in Word 2010.....first initial glance I thought it was a PICNIC issue. But when addressing it she has it set up to NOT "Show all windows in the taskbar" that option is unchecked so that way she
    can close out docs in Word and not actually close Word. But with unchecking that box it only stacks the docs it won't display them in mutliple windows. This is not the case with Excel as she has the option enabled to "Show all windows in the taskbar"
    but yet the enduser still has the option to close out the spreadsheet and keep Excel open. Is there anyway to keep that second smaller x in Word to close out the docs but yet open in multiple windows like Excel does?
    Please advise!
    Thank you and any help would be greatly appreciated.

    Hi VyDrix13,
    What will happen if you check the option of “Show all windows in the taskbar”?
    If you want to closing document and keep Word open, the alternative is to click File > Close, right there under Open and Save.
    You also can add the Close button to the Quick Access Toolbar.
    If there is anything that I can do for you regarding this issue, feel free to post back.
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Why can't I open InDesign CS4?

    I get error messages - the first one says:
    Font Capture:InDesign.ece - Entry Point Not Found
         The procedure entry point .......  could not be located int he dynamic library link Public.dlll.
    Then I get a second error that says:
    Cannot load the SNIPPET.APLN plug in.  It is dependent ont he INXCORE.RPLN plug-in, which failed to load. 

    1. Windows Vista, Home Premium (service pack 2), and I operate on a PC.
    2. I stated my InDesign version in the original heading - It is CS4. 
    3. The file is an INDD file & we don't know which version it was created in.
    4. Start - All Programs - Adobe Master Collection CS4 - Adobe InDesign CS4
    The error message appears in a box heading that reads:  Font Capture: InDesign.exe Entry Point not found
    The message inside that box reads:
    The procedure entry point ?Reset@CextScriptDOMEElement@@UAEXXZ could not be located in the dynamic library link Public.dll.
    I click OK in that box - then receive this error - Heading in the error box reads:
    InDesign.exe
    The error message appears in a box heading that reads:
    Cannot load the SNIPPET.APLN plug in.  It is dependent ont he INXCORE.RPLN plug-in, which failed to load.  Please check documentation for the INXCORE.RPLN plug in. 
    I purchased the Adobe Master Collection back in 2008 or 2009 & have used several of the programs, but never attempted to open InDesign. So - I don't know if this was always a problem or ??
    I'd appreciate any insight into my dilemma!
    Thank you,
    LouAnn Covi

  • Setting Default Indesign program with multiple versions installed Snow Leopard

    Hi,
    when having 2 versions of Indesign installed (CS4 and CS5), Snow Leopard uses CS5 as the default application to open INDD files.
    Typically if you want to set a particular program as the default program, you right-click on the file, go to "get Info", then "open with" and pick the applications from the pulldown menu and then click right below it "Change All". Typically now that program has become the default program. This has worked all the time except in this case. When trying to set Indesign CS4 as the default program for all INDD files (use CS4 99% of the time and all INDD files on the system were created using CS4) it will not let me use the "change all" button. It automatically goes back to CS5. I want Indesign CS4 to be the default program.
    Any suggestion is greatly appreciated.
    Thanks.

    Change file associations manually or have this freebie jewel do it for you. Most likely CS5 will take over again. Otherwise you can go fish on http://hints.macworld.com/ for another way.
    Rubicode - RCDefaultApp

  • Can't print in Landscape mode since installing Snow Leopard

    Since the installation of Snow Leopard 10.6.2 I can't print in landscape format from application such as Word, powerpoint, Turbo Cad, etc, on my network printer. This is despite changing my page set-up and printer settings My only work around at the moment is to print to a PDF document and print a hardcopy from there. Any thoughts...??

    Hi fruhulda,
    1000 thanks for your help. I've tried everything you suggested. Nothing really fixed the problem except creating a new account. In the new account, I could open and use Pages documents I had created before I switched to Snow Leopard. And all of the functions seemed to work properly, including copy and paste.
    In order to use my old, pre-Snow Leopard documents, I had to put them into a shared folder, so that I could access them from my new account. Does this mean I'm going to have to move ALL of my files from my old account into a shared folder, bring them into the new account, and make the new account my main account? If so, that seems like a lot of annoyance and a lot of work. Not that I'm blaming you--thanks for the fix. It just would have been nice not to have to start from scratch.
    Also one or two worrying things came up when I did my disk repair, namely, the following two messages:
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFramework/DesktopServicesPriv.framework/Versions/A/Resou rces/Locum" has been modified and will not be repaired.
    I did some looking around in old forums and other people have gotten these messages before and seemed to be pretty worried about them. I don't really understand what they mean, and I guess I'm wondering if I should be worried about them too.
    Again thank you very much for your help so far.

  • Since installing Snow Leopard 10.6.8 I can't print checks on Quicken 2006.  I also discovered that  my M.S. Word 2004 freezes and won't work when I try to "save as".

    Since installation of Snow Leopard 10.6.8 a week ago, I have not been able to print checks on Quicken 2006.
    Now I find that Word 2004 will not "save as" and freezes.
    Any help?

    Unfortuantely you are victim of bad timing.  Apple did release a followup security update that fixes those issues. You can download it from:
    http://support.apple.com/kb/DL1489
    If issues still persist, the tip here:
    http://snowleopard.wikidot.com/h-n
    May help your Microsoft Office issue as far as duplicate font clearing.

Maybe you are looking for