Why can't I open items in iDVD sub menu & Open Existing project lists?

Recently I installed *Jam Pack-Music of the World*. Since then, my iMac experienced one Kernal Panic while I was using iMovie. Later I tried to burn the movie I had been working on, iDVD got stuck at audio encoding and then quit unexpectedly a while later. When I tried to +'Open Existing project'+ in iDVD, I noticed the list of files in the *Movie folder* of the iDVD dialogue window are shaded grey and could not be opened. (They could however be opened from the *Documents foder* where they are shown as .dvdproject files.) Additionally it became clear that about 40-50 GB of storage space on the hard drive had been lost. I have also noticed that the items listed in the *iDVD sub menu* (tool bar) are also grey and cannot be opened - although if I first open a project from the documents folder these items then show black and can be opened. I've had my iMac for 18 months and had no real problems till now. I'm new to computing and at a loss as to what's happened and how to rectify it.

I don't purport to be an expert, but since you have not gotten a response as yet, I'll give you my comment.
If you got a Kernal Panic, your computer is in need of some maintenance. The following recipe is from one of the gurus on the iMovie formum in a different context. " Restart from your install disk (by holding down the C key as you restart), and go to Disk Utility, then repair the hard disk. Restart as normal and then repair permissions from the same utility."
Make sure that you have enough free space on your hard drive for these programs to work -- at least 15GB and better 25GB.
You could also try uninstalling Jam Pack-Music of the World, and see if that clears up the problem.
Good luck.

Similar Messages

Why can't i Cut items and paste them? I have to copy Paste and delete them?

Why can't i cut items (ctl + x) on my Macbook air? I always have to copy item from original location to location where i want to paste and del

Are you talking about cut/paste within an application (i.e.: Word, Textedit) or Finder? (i.e.: cut/move file to folder or external hard drive.) Finder doesn't have cut, just copy. As to why, you'd have to ask Apple.

Why can I not move items within a playlist?

why can I not move items within a playlist?
I should be able to drag songs up and down - and I can in other lists - but not on a new one I just created. ??

Brandcast, I'd suggest you post in a new topic. Although your question is the same, apparently the answer isn't. Any topic that was originally started over 2 months ago may relate to a different version of iTunes (neither you nor the original poster say which version you use) and who knows what may happen between versions.
Message was edited by: Limnos - user has started a new topic

Why can't i get word documents created by pages open in word

why can’t i get word documents created by pages open in word

What version of Word and Pages?
What is the file extension?
How did you Export the Word file?
Where are you having the problem? On Mac or PC?
Peter

Why can't I message on my Mac. I open up my messages and it stays up there for a second or two. Then it will close out by itself. Help!

Why can't I message on my Mac. I open up my messages and it stays up there for a second or two. Then it will close out by itself. Help!

For some reason, the error box photo didn't appear in my post. Here it is:

Maximum open item % and no of days open item in credit management

Hi
Can any body explain how works " Maximum open item % and no of days open item " after checked in ova8 with examples.in credit management.
regards

hello, friend.
maximum open items is helpful for you if the customer is still within credit limit but has overdue open items.
let's say your customer has a credit limit of $100,000.00. and you set in OVA8 for maximum of 20% or $20,000.00.
now let's say your customer's total exposure is $43,699.00, which is still within credit limit. however, out of this, $21,245.00 is over the credit terms of 14 days. now if you set "1" in days in OVA8, 1 day after overdue the system will either block the newly processed sales order or issue a warning, depending on OVA8 settings.
regards.

Why can't i access or click on the menu options at the top of ANY web page? Also, Can't close a moddle window using the x in the upper right,?

Why can't i access or click on the menu options at the top of ANY web page? Also, Can't close a moddle window using the x in the upper right,?

Problems with buttons and links at the top of the page not working can be caused by an extension like the Yahoo! Toolbar or a Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode

I want to render false for a Item in one Sub menu only

Hi all,
I have a page which is been used in four submenu under the same responsibility.
in this page now i want to hide an item for only one submenu
When i am trying to set the render property as false at any level(that is personalization at site level ,or OU level or Respnsibility level)is getting rendered false for all the Submenus.
Could you please let me know how can i hide this for only one sub menu.
Thanks
Ajay

Hi ,
requirement is bit tricky ,but i think there will be some value on the page which will identify that page has been rendered under which sub menu ,u need to identify that value and then need to extend the controller and set it render false conditionally based on the identified value in PR method of controller.
thanks
Pratap

Reversal FB08 Creating New OPEN ITEM instead of clearing the open item.

Dear All,
My user has an issue whenever he does any reversal Tcode - FB08 in one of the general ledger "Cash in Transit" nature "open item" & "Line item" instead of clearing the open it it creates a new open line item.
I have checked in Table BKPF , the reversal number is being updated but this items are still appearing open item in FBL3N and not appearing in F-04 (all reversals) for clearing.
Can any one share what can be the reason its creating new open item and how can i solve the issue for clearing the account.
Thanks & Regards
Pravin

hi
Please check following cases
- whether this is happening in all the reversal cases of Cash in transit
- Whether is user is just using FBRA (Onsly resetting) and not going for reversal
- Chances would be one or two partial clearing may have taken for single document for the offsetting accounts
Thanks
Sandeep

Activate open item management on G/L with existing line items

Hello all,
I have a G/L account with line items on it. I want to activate open item management now.
I can do that in several ways and have also managed to do it.
The EXISTING line items, however, do not have an open item status in the sense of "open" or "cleared". Instead, they show up with the green tick in front of the line. I would actually want the existing line items to be marked as "cleared" so they will disappear from the open item inquiry report.
I have found several SAP notes about this behaviour and know that SAP recommends to create a new account and then re-post. In this particular case, however, I have lots of reasons to keep the existing account.
My question is therefore if someone knows how to make the existing line items disappear from the open item inquiry. We are on SAP 4.6C and switching to ERP 6.0 so would be interested in both systems. By the way, I also found several info about FAGL_ACTIVATE_OP but this seems to be for the new G/L which we don't use.
Thanks in advance for any input.
René

I just saw this question now, if solution is still necessary you can read on
First: you can make an account open item only if the account has no balance. You mentioned there are postings on the account. If these postings make a zero balance all together (i. e. the debits and credits are equal):
1. change the master data
2. run program RFSEPA02 to change the existing items
3. clear the items
If the postings do not make zero, than you have to first make the account balance zero, carry out the above steps and reverse the posting mentioned previously.
The above works for 4.6x and ECC 6.0 systems as well.

Reg: Certain Open Items are not showing in open item clearing F-44

HI all,
I want clear open items using with f-44 but cetain open items are not showing in opeing item clearing. i checked in FBL1N all open items are shwoing i want see all open items inf-44 how to see plz help me
with regards
JK Rao

Hi,
Check whether you r giving some additional selection take it as none and are the items in the account have any special indicator you might not be giving here.
reward pts if useful
regds

Won't open homepage on open, won't open web pages from the menu 'open new window', Can't open menu button

Ok, since update to version 31.0, I have been having some problems.
I have tried doing everything stated in the support page about resetting, reinstalling, safe mode, restarting pc etc.
First problem, when I open Firefox no web page loads. It just says New Tab and a blank white page. If I press the home button I am taken to my homepage which is google.
Second problem, when I right click on a link and the menu pops up, if I click open in new window, a new window opens but it just says New Tab with a blank page and no URL information, just blank.
Third problem, the Open Menu button just doesn't work at all. You can click all you like, that thing is not opening.
I am really stuck as to what to do. I have only been using Firefox for about a month and t was good until these problems. If I can't resolve it, I will have to use another browser as it is really annoying.
I am using Windows 8.1 by the way and have scanned my computer thouroughly for both virus's and malware.

Hi zenithtwc, to test whether this is a settings issue, could you do a three-minute experiment?
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
''Don't delete anything here.'' Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, assign a name like Test731, and skip the option to change the folder location. Then start Firefox in the new profile you created.
Can it reach the internet?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

Transfer/Conversion of Existing Open Item GL to a new Open Item GL

Greetings,
We're standardizing our banking GL accounts and as part of this we have to transfer open items and line items (line items from non-open item GL's to a new Open item GL). What might be the best way to transfer multiple open items from one GL to another in an existing production client?
thank you.

old

Why can't I see the test button in menu?

In Videos I have seen the "test" button to test a form bevore publishing it.
Why can't I see this button?

What videos?
Maybe this is a user created button on the presenter's appliction.

Keyboard shortcut to open a cells pop-up menu and select from list of options.

I guessed Option-Return would be the shortcut from this, as it typically lets you edit a cells contents, but no. Read the keyboard Shortcuts list in Numbers>Help but didn't see anything.

Hi ts,
Thanks for drawing my attention to this! Let's add some missing detail…
While "you just press spacebar" to open the pop-up menu, that won't select a menu item.
After you've opened the menu, 'you could press the first letter' of an entry, ( 'like every other pop-up list on Earth,') or you could press the down arrow to step down the list (and the up arrow to step up, if you went beyond the item you wanted to choose).
And you can change your mind; the menu will stay open until you confirm your choice (by pressing the space bar again, OR by pressing return OR by pressing enter).
Note that pressing the first letter will select the 'smallest' item name beginning with that letter. To move to another item name starting with that letter, you'll need to use the up or down arrow key (or the mouse).
Thanks again for posting. With luck, WideEyedPupil will still be monitoring this discussion, and will see these posts.
Regards,
Barry

Why can't I open items in iDVD sub menu & Open Existing project lists?

Similar Messages

Maybe you are looking for