Why can't I print a web page on my HP 1600 with FF4 but is works just fine with FF3?

For example a web page that shows a recipe. It won't print. I select print and nothing. Works just fine on Firefox 3

{Ctrl + P} or File > Print will bring up the "native print dialog" box.
Is your printer selected in the '''Printer - Name''' box at the top? <br />Is '''Print to File''' selected in the mid-point on the right-side of that dialog? (should not be check-marked)

Similar Messages

  • Why can't i print a web page,

    why can't i print a web page, using windows vista 64, HP photosmart 8250?

    This software can help print from the web:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01812475&cc=us&dlc=en&lc=en&product=443024&tmp_​...
    This utility can help determine if things may not be setup correctly:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p​...
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Why can't I print a web page from my Android 4.1 phone to my 8500a printer? e-print is working.

    Why can't I print a web page from my Samsung Android 4.1 to my Officejet Pro 8500A. eprint is working, so I can send e-mails to my e-print address, but when I try to print a web page, it says that I don't have a printer. Can someone help me with this? 
    This question was solved.
    View Solution.

    Just received an update to the Android version of HP ePrint.
    It now has the ability to print web pages!  Thanks HP!  
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • My iPad connects to my router but does not open any web page or even download my mail. My router works just fine. My iPod touch is having no problems loading pages. If at all my iPad does open a page, it does so very slowly. It happens with all routers.

    It never had any problems before I upgraded to iOS6. Please help!

    Hi adtsalmon,
    You can only watch the movie on the device you rented it on. Here's a snippet from the Apple Support site (italics mine):
    If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
    If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
    Here's the link to the Movie Rentals FAQs site FYI:
    http://support.apple.com/kb/HT1657
    Hope this helps!
    Cheers,
    GB

  • Why can't I print a full page photo in Photoshop Elements 10???

    Why can't I print a FULL PAGE PHOTO IN PHOTOSHOP ELEMENTS VERSION 10, (letter size 8.5 x 11?)  I have tried resizing, cropping and anything else I can possibly think of to no avail!!! VERSION 7 was so easy just print (fit to page)! I'am pulling my hair out trying to accomplish this! If anyone can tell me how to do it I would be eternally grateful! Thanks Julie
    P.S. I can't even print a 8 x 10 properly!

    Sarah, my printer drivers are updated! This problem seems SO COMPLICATED when it should be so easy!  It's like the more advanced these programs get the less you can figure them out!!!!  I'am ready to offer a reward to fix this!!! The stress of trying to figure this out is making me crazy!
      From: saurabh288<mailto:[email protected]>
      To: JULIE HIGH<mailto:[email protected]>
      Sent: Thursday, February 14, 2013 11:10 PM
      Subject: Why can't I print a full page photo in Photoshop Elements 10???
            Re: Why can't I print a full page photo in Photoshop Elements 10???
            created by saurabh288<http://forums.adobe.com/people/saurabh288> in Photoshop Elements - View the full discussion<http://forums.adobe.com/message/5074854#5074854

  • I can no longer print a web page. I get an error code 20 message

    I can no longer print a web page. When I do I get an error code 20, unspecified problem.

    Try a battery pull, wait a couple of minutes and pop it back in..

  • Why can't I print from my 4s to my HP envy. I used to work and it still works from my air book?

    why can't I print from my 4s to my HP envy. I used to work and it still works from my air book?

    Morning thomas b olsen
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    http://support.apple.com/kb/ht4356
    How to print in iOS
    You can print from the Apple applications, such as Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, Filemaker Go, and so on. Apps available from the App Store may also offer this feature.
    To print, follow these steps:
    Tap the action icon .
    Tap the Print button.
    Select the appropriate settings, and then tap Print.
    Important: If you are printing for the first time, or if the previously selected printer is not available, you will need to select a printer before step 3.
    Note: AirPrint displays only the essential printer options that apply to the document or image being printed. Details such as media type, page size, and orientation are automatically determined at print time.
    Hope this helps,
    Mario

  • Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how  indesign can do this action.

    Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how  indesign can do this action.

    set the wake-on lan on the main computer
    The laptop's too far away from the router to be connected by ethernet. It's all wifi.
    No separate server app on the laptop, it's all samba
    The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
    I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
    Last edited by saft (2010-03-18 20:38:08)

  • Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

    Hey Guys!
    I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
    The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
    Can you help me? Please?!
    Thanks Folks!

    This must be a tough one, no suggestions at all.

  • I can't print. When I go to file-print, nothing happens. My printer is working just fine with IE and everything else.

    I can't print. When I go to file-print, nothing happens. My printer is working just fine with IE and everything else.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

    I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

    ok no problem! all i did was 1) set up the mobile hotspot on my phone. 2)  turn it and wifi on on the phone. 3)  connect the laptop/desktop to the hotspot network. 4) insert setup disk for the printer and begin setup. 5) complete the setup "using a usb cord to temporarilly connect the computer and printer" 6) unplug usb cable and finish set up on the laptop/desktop. 7) give it a few minutes to show up on the AirPrint menu on the phone. 8) that should be it. I unplugged the printer and plugged it back in, made sure the laptop was totally turned off AND disconnected from the network, and did everything I could to try and make it not work. The printer I have is a Canon MG3122, it doesn't have a fancy screen or even a way to input a password or anything like that, so it just strores a default network that it will connect to. in order to change networks i would have to complete setup multiple times. Since I only plan to use it with AirPrint for my mobile business....the one network is just fine! Hope this helps!

  • I just installed mongolian cyrillic keyboard and it's working just fine with safari but i can't type on Word with it. please help me?

    i just installed mongolian cyrillic keyboard and it's working just fine with safari but i can't type on Word with it. please help me?

    PS Here is a source for a keyboard.  Try it if you have not done so already
    http://m10lmac.blogspot.com/2012/12/new-mongolian-keyboard-layout.html
    For questions about why Word doesn't do something, try
    http://answers.microsoft.com/en-us/mac/forum/macword

  • All of a sudden I can no longer print any web pages. I have tried the solutions offered on the web site to no avail. I have also tried reinstalling it. If i can't fix this I'll have to use IE instead, but that is not what I want. What do i do now?

    When I click on the print icon or file-print, nothing happens at all.

    Is your printer selected? <br />
    Is '''Print to File''' selected, where the web page is being printed to a file and not being sent to your printer?
    See the screenshot below.

  • Why can't I successfully upload web pages using FTP?

    I recently installed Adobe Dreamweaver and successfully connected to a remote server where the files on my existing website are stored. I was then able to call up web pages from my local site, make revisions and successfully upload them (using FTP) to the remote server.
    Problem started occurring when I received a Dreamweaver prompt advising me to change the name of my website's root folder from Unnamed Web Folder 1 to the actual location of the files on my i-Mac hard drive. In doing so, I moved the path of the site and changed the name of the root fokder.
    Since then, when I make revisions on a locally stored web page and try to upload it to my remote server (by clicking on the "put" upward arrow), the operation seems to be excuted correctly. But when I test the revised page on a separate browser (like Safari or MI Explorer), the un-revised web page is displayed.
    In trying to remedy the situation. I fear that I've been digging a deeper and deeper hole and may have screwed things up even further.
    Help!

    I'm really confused.  So let's back up about 4 steps.
    Local site files should be on your hard drive.  The same computer hard drive that Dreamweaver is installed on.  For sake of argument, let's put your site files into a folder called YourSiteName on your C: drive.  Do not use any spaces or special characters in your folder or filenames.
    LocalSite = C:\YourSiteName
    Then tell DW where to find that folder as in the screenshot I posted earlier.
    Next, define your remote server settings and tell DW which root directory your hosting company told you to use for your site files.  Some hosts use public_html or htdocs or www.  And some hosts don't use one at all in which case you leave that field blank.
    See screenshots.
    Next hit More Options.
    Hit the test button to confirm you can connect to the remote server.
    Nancy O.

  • Why can't I print a 3 page pdf document?

    I have an HP Laserjet P1102W. I am trying to print a 3 page pdf document. The print preview looks correct but when I go to print it prints a blank first page. The second page prints correctly but the 3rd page won't print at all and I get a error light on the printer. I think it might have something to do with the spooler settings but I don't knowthat much about it. Does anyone have any ideas?

    Hey hoganhead!
    I'd recommend taking a look at this article:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02726548&cc=us&dlc=en&lang=en&lc=en&product=411...
    This links to a diagnostic utility supplied by HP to test the printer for issues.
    Pending the results, I'd love to get more info regarding the issue such as the error lights and what they look like.
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Maybe you are looking for

  • How to delete log files in wheel group

    Let me start by saying that I've never used the terminal mode on a mac before, and I know nothing about UNIX. But here's my problem: My MacBook Pro, running OS 10.6, began filling up its boot disk for no apparent reason. I ran Disk Inventory X and fo

  • Result Analysis - Errror message

    Hi while we run the result analysis in KKAK we are getting "Cost element 910108052 (line ID ZTS) already used for line ID CSA. Need some help solving it. Thank you, Nivi

  • SQL 2014 Linked Servers with Availability Groups

    Good afternoon All. Hope your well. We have SQL 2014 Availability group setup over multiple Subnets. So basically Instance A(In Primary DC), and Instance B (Secondary Replica, in secondary DC), with AG1 (Availability Group)  When I connect to the ins

  • I know its been over done, but benchmark help please!!!!!

    hi all, we are running a 2.5g G5 with 8gb of ram, i was wondering if a base model macbook will keep up, as im about to order one. does anyone know if there is a clear answer to this? and also how many audio trakcs can i get out of the internal 5400rp

  • IPhone sends message only to first email address in Address Book

    Let's say I want to send an email to Jane. I have [email protected] and [email protected] in Address Book. Work first, home second. I select: [email protected] but the message appears to have been sent to [email protected] (?!). Happens all the time.