Why can't I print to my HP OfficeJet Pro 8500A Plus All-in-One from my wired PC?

I have an HP OfficeJet Pro 8500A Plus All-in-One on my network. My router is wireless, which several of my devices (laptops, ipads, etc.) use to get an internet connection, but I have one desktop PC that is actually wired to the router via ethernet cable. For some reason, when I attempt to print to the 8500 from the wired PC, the doc just sits in the que, eventally registering as an 'error'. But all of my wirelss devices can print to it just fine.
Oddly, this is somewhat of an intermittent issue, as I have printed successfully from this PC before, but I can't right now. I'll also throw this in: I have at times, plugged an ethernet cable into my wireless-capable laptop and had the same issue. But then I just unplug the calbe, reboot, and turn on wireless, and can print without any issues ... so I suspect it has something to do with the fact that the PC is wired to the router.
Don't know if this has anytthing to do with it, but my wireless network is called 'FrogNet', but my wired PC doesn't see 'FrogNet' like all my wireless devices do. It just indicates that this is part of a generic network. Ideas? (All computers run Win7.)

Hi pulind,
Run the diagnostic utility from Message 2 of 5
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

HP Officejet pro 8500A Plus All in one printer - Keeps on wanting to realign printheads

Please could someone out there help me with a very annoying problem. The message 'realigning prontheads' keeps on appearing and then spews out another relaignment graph. I have cleaned the printheads and contacts manually with no effect. I would be grateful if anyone has any ideas - thanks

This alignment page document may help:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03094803&lc=en&product=4116838&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

I live out in the county where WiFi is not available. I don't have internet either. I have purchased the ipad2 and have been told that I can print from the ipad2 directly to the HP Officejet Pro 8500A eprint all-in-one. Is that true?

I would like to be able to print from my ipad2 or my iphone4 directly to a wireless printer. I don't have WiFi at home or internet. I am able to get my emails and use the internet thru both these at home. Will I be able to use them to print? Any suggestions which printer? I was told that the HP OfficeJet Pro 8500A eprint all-in-one should work and wouldn't have to use a router. I don't want to go purchase this and try to set it up if it won't work thru the 3G network.

kathyfrompalmyra wrote:
I would like to be able to print from my ipad2 or my iphone4 directly to a wireless printer. I don't have WiFi at home or internet. I am able to get my emails and use the internet thru both these at home. Will I be able to use them to print? Any suggestions which printer? I was told that the HP OfficeJet Pro 8500A eprint all-in-one should work and wouldn't have to use a router. I don't want to go purchase this and try to set it up if it won't work thru the 3G network.
Apple says that it will work.

HP Officejet pro 8500A premium, all-in-one printer, scanner problems

I have an HP Officejet pro 8500A premium, all-in-one printer.
Tried uninstalling using the HP supplied uninstall software and installed recommended OSX 10.8 software for this device.
I use wireless scanning. Scanner only scans the first page then shows an error.
Anyone have this problem as well and any possible solutions?
Thanks

The HP Scan works just fine in Mountain Lion for me. Always has.
OfficeJet Pro 8500 A909a
I think the original poster needs to reinstall the latest software for the printer that came with his printer or directly from HP. Then, install the Apple HP updates.
When he unistalled the HP software, it may have removed the software needed for HP Scan to work properly.
The last software I installed from HP was -> HP_Installer_Officejet_Full_Group05_10.3.dmg
Yes, there have been Apple HP updates, but they never stopped my HP Scan from working.

What do I do when I get the message my printer is not connected? HP Officejet Pro 8500A e-All-in-One

What do I do when I get the message my printer is not connected when I want to print wirelessly.? HP Officejet Pro 8500A e-All-in-One. I have a macintosh computer using snow leopard. I have used the printer for 6 months. Nothing has changed. I shut off the printer and turned it on. The internet is working altough I will turn it off and on. What do I do next? Thank you.

The easiest and fastest thing for you is to reset the printer to its defaults and then just install the printer again following the instructions in the manual when you received it. If you don't have these you will find this on the HP web site.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I am a studio graphic designer needing to purchase a color jet printer to handle small business takes. I am trying to decide on the Epson WorkForce Pro WP-4530 All-In-One Printer OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelop

I am a studio graphic designer needing to purchase a color jet printer, for my iMac, to handle small business tasks. I am trying to decide between the Epson WorkForce Pro WP-4530 All-In-One Printer OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelopes).
Do you have any recommendations?

I am a studio graphic designer needing to purchase a color jet printer, for my iMac, to handle small business tasks. I am trying to decide between the Epson WorkForce Pro WP-4530 All-In-One Printer OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelopes).
Do you have any recommendations?

Iphone e print/air print issues with HP Officejet Pro 8500 Premier All-in-One A909n

I downloaded the 4.2 upgrade for iphone thinking I would be able to print from my HP Officejet Pro 8500 Premier All-In-One A909n. I have upgraded the HP firmware. I have turned my printer on and off. I get an error message that says "No printer found." I am not able to contact HP due to my warranty being expired--even though I bought the extended warranty from the store. Please help. Thanks!

This printer is listed here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01619067&lc=en&dlc=en&cc=us&product=3857218#N46...
has offering eprint. However, some community messages say that it does not work.
I have not been able to get an email address set up for the printer, or to figure out whether or not it is web services enabled.
It does not have the icon on the touch screen that is shown in the hp instructions.
Any clues out there?

HP OfficeJet Pro 8500A e-all-in-one has stopped printing from my computer

My 8500e has been working fine for months. My computer is an HP HPE Phoenix h9t. I'm running Windows 7. The printer is set up on the wireless network. This week it just quit printing. I have uninstalled, reinstalled, downloaded diagnostics. You name it, I've done it. Nothing in my network or computer setup has changed. I can set up the wireless on the printer itself--it sees my wifi network, I enter the security code, I can print the wireless network test report from the printer itself, everything is pass and excellent.
Then when I install the software on the computer, tell it I have an IP address from the printer, which is connected wirelessly, I put in the IP address from the display screen on the printer and computer searches then says it can't find it. I have also reset the printer to factory defaults. No go.
We are definitely on the same, secure home network. However, now when I enter the IP address that the printer is giving me into IE, to see if I can see it that way, it can't find it. Is that where the problem is? How do I fix that?
I am WAY beyond frustrated, my work is frighteningly behind, and my husband can't airprint from his iPad. I have searched the forum and can't figure this out.
Thanks for reading through my litany of woes...

Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet Pro 8500A e-All-in-One Printer series (A910)

I can not print once I installed a new Magenta ink cartidge. It comes back with the same message to replace the magenta ink cartridge and this is the second new cartridge in two days. I did notice the cartidge originally indicated only 50% full. Not sure why I keep getting the same error. I cannot use the printer now. Not sure how to correct the problem?

Hey 60DanL,
you can try this document.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02603397&lc=en&product=4116838&tmp...
Kevin_US_CA
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the left side of my post to say thanks!***

HP Officejet Pro 8500A e-All-in-One Printer - A910a keeps getting assigned 169. ip address

Im currently using a ubee wireless router
my OS is Windows 7 home premium 64 bit
My printer is able to connect to my router however it is assiged a 169 ip address, therefore my computer is unable to connect to the printer. Before I was even able to connect my printer to the network I had to disable my mac filtering on my router settings because my printer told me to do so on a wireless test report, but its been an ongoing issue where if its not the IP address its something wrong with the MAC filtering. I feel like im going in circles. Please HELP!!

No it is not connecting to your router as the printer has an invalid IP. What procedure are you following in the manual and the support HP web site to get connected??
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

My wireless computer unable to print to hardwired hp officejet pro 8500a plus

My wireless computer is running window Vista home.
1. I have tried to print from several programs and have resulted in a print error in the printer que.
2. I have gone into the printer properties and verified the correct IP address and driver are installed.
3. Attempted to send a test page from the properties window, same result.
4. Uninstalled and Reinstalled the printer software and drivers from the CD. It prints one time than, same results.
5. The printer is directly connected the wireless router and is connected the the HP service. I am able to email the print job and have it print, but I want the printer to print over the network not the internet.

Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My HP OfficeJet Pro 8500a Plus won't print. Paused queue cannot resume. 'Doctor' fails to solve.

As a Windows 7 Admin user I can print to the HP OfficeJet Pro 8500a Plus but other users cannot. Their prints go into the 'Print Queue' and neither Resume or Restart will work. Resume merely deletes it from the queue and Restart does nothing.
Print and Scan Doctor doesn't resolve the problem. It refers to the 'stuck queue' and restarts the computer. Even then it does nothing to solve the problem.
There appear to be many instances of this problem on searching the Internet, most suggesting highly complex solutions. Surely it shouldn't be that difficult to solve.

It sounds like it could be a permissions user since the admin account has no issue printing to it.
Are the other users printing from the same computer, but different accounts or are they printing to the networked printer from different computers?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP Officejet Pro 8610 e-All-in-One Printer server 2003 - 32 bit

How can we install the drivers for HP Officejet Pro 8610 e-All-in-One Printer on MS Server 2003, 32bit?
The available driver list includes Server 2003 32 bit as an acceptable OS but when I try to install, the installation routine says that it is not compatible. Thank you for your interest in my question

Hi soeasy, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial issue. You can do this at HP Commercial Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

My iPhone and my iPad are connected by wi-fi, but I can't print on HP Officejet Pro 8500A Plus. On the other hand, I can print over wi-fi from PC. What can I do?

Hallo, thank you for trying to help. Here is my problem:
In the past, the airprint was possible without problems from iPhone 4 and iPad 2. Since today it doesn't work anymore. My iPhone 4 and my iPad 2 is connected by wi-fi and I can serve in the internet. But I can't print on HP Officejet Pro 8500A Plus. On the other hand, I can print over wi-fi from PC.
There are low ink-levels and therefore a message comes to indicate this by printing from PC. iPhone and iPad are accepting the print order without any messages after, but does't excecute the print.
What can I do?

Hey helmut,
You can also try the ePrint method listed here if you can't get AirPrint working:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641898&cc=us&dlc=en&lc=en &product=4116838&tmp_track_link=ot_search
The application HP home and biz app is free in the app catalogue!
Hope this helps.
I work for HP.

Hp officejet pro 8500 premier all-in-one printer

The above printer is 1 1/2 years old and it has stopped printing. When the printing became light, I installed new print cartridges less than a week ago. Now, after five days, the printer is consistently cleaning the print heads and aligning the print heads and my documents are not being printed. And, what is most frustrating, during all the cleaning and aligning, all of my new ink is gone and I'm receiving a message replace ink cartridges.
Re: Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on
Options
08-24-2011 06:34 PM
Well,
to this is say, "get used to it", or throw it away. Many, Many, Many people have had trouble with this printer.
The following are common and frustrating issues that this printer exhibits on a regular basis:
1. Constant Self-Checking (usually every 20-30 pages of print)
2. Very persistant Printhead Cleaning/Checking, (Every startup and after about 20-30 pages printed).
3. Worn-out printheads (usually within 1,100 to 1,500 pages printed).
4. Paper mis-feeds.
5. Paper jams.
6. Nearly impossible to use once the printer reports ink-depletion.
7. Nearly impossible to use CIS Ink for larger print jobs.
8. Ink and printheads "expire" regardless of when they are placed into service. (get a deal on ink or printheads last year? Too bad, the warranty is already expired, most likely).
In short, this printer is the most EXPENSIVE printer I've ever owned, and the most frustrating to use.
I have just over 2,000 pages of regular text printed matter with very little color, and have already gone through 4 sets of ink, and 2 sets of PrintHeads.
Although it's true that you can leave the unit on, and let it go into standby, you should NOT be punished with constant and time-consuming "self-checking" everytime it's turned on, or prints a handful of pages, BUT, it does NOT appear that HP will be standing behind this printer disaster. AND, to make things worse, they've gone on to redesign it, giving it a different look, and so there are about 6 different models/versions of the OfficeJet Pro 8500.
Anyone needing a reliable print/fax/scan/copy solution should look beyond this printer, because it will leave you wanting more, and spending more than you ever imagined you would have to on a late model printer.ro
What is going on? Why does it just automatically clean and align? I also get alignment failed messages. Any suggestiions?

rammerjammer,
Thank you for bringing this to my attention, your feedback is very important and I want to do my best to help. To answer what is going on, since the printing became light, started cleaning itself constantly, and fails the alignment, the printhead was damaged. Click here to see and use the Limited Warranty for HP Ink Cartridges, Printheads, and Related Supplies. There are many ways to contact HP. The number to call is 1-800-474-6836 for HP and Compaq products for Home & Home Office use. If you no longer have a warranty with the printer you can still use the warranty that comes with the printhead or ink cartridges.
If you have a carepack with the printer that extended the one year warranty then the troubleshooting will be covered along with the printer if the printer needs replacing. Check product warranty here, see HP Out of Warranty Support Options for Select HP Consumer Printers here.
To order a new printhead you can go to HP Sure Supply and enter your printer or go to the HP Parts Store and order the printhead by part number C4900A for the Black and yellow and part number C4901A for the Cyan Magenta. These printheads go by region also so be sure you are using the right region, these were found using the United States region.
The HP Officejet Pro 8500 Premier All-in-One printer has separated the ink cartridges from the printheads. The ink cartridges are on the lower left and the removable print heads are on the carriage inside the printer. The printer goes through a calibration process when turned on that will use ink. Leave the printer on and let it go into stand by mode. This type of printer is energy star efficient and made to calibrate on start up and be left on. Allow the printer to clean or calibrate only if the printer must. If it starts cleaning a lot it may be time to do a little maintenance to the printer (recommend once a month for maintenance). Please see the following links for further details.
Cleaning the Printhead Contacts
Printer Paper Tears, Wrinkles, or is Damaged while Printing from the All-in-One
Paper Path Issues in the Automatic Document Feeder
Officejet Pro 8500 User Guide
The printer has a duty cycle of 7.5k page/month. The XL cartridges have a composite page yield of 1.4k pages with about a third of the black ink left over. To me it would seem that the printhead should last somewhere in between. This printer was designed to save money on ink compared to the rest of the officejets. I hate that it has been causing so much trouble, hopefully the information I provided will help.
HP Officejet Pro 8500 Premier (A909n) and 8500 Wireless (A909g) All-in-One Printers Product Specifications
Click here for page yield information.
Click the Kudos on the left side for helping and click Accept as Solution for providing a solution. I work for HP.
Best Regards,
Kenneth

Why can't I print to my HP OfficeJet Pro 8500A Plus All-in-One from my wired PC?

Similar Messages

Maybe you are looking for