Why can't I see an export value option in my radio button properties? I am using Acrobat X pro.

Thanks so much. Thought it was just the name of the button and did not realize it was the value. Now able to use them for calculations.

Similar Messages

Why can't I see the "código fuente" on my VER button?

Why can't I see the "código fuente" on my "VER" button?
Thks
Dick KELLER

I don't really understand what you are asking. There is no iTunes Player. iTunes on your computer is not the same as iTunes on your iPad/iPhone/iPod. On an iOS device, iTunes is just a store, where you buy music, rent or buy movies. The music you have in your iTunes library on your computer can be synced to your iPad and you choose what music you want to sync to your iPad while your iPad is connected to your computer in iTunes. When you are not connected to your computer via iTunes, any music you did not sync to your iPad will not be viewable in iTunes, thus it can't be played because you did not sync it to your iPad. I don't I can make this any clearer.........

Why can't I see my PayPal payment option in my iTunes account?

Sorry, hit send too soon. Tried to download from app store for last 2 days, but it said that I have to verify my PayPal account. Nothing wrong with PayPa (verified thru PayPal) but I don't even see a PayPal option in my iTunes account. I Remember setting it up when I got my iPad, but why can't I see it now to make changes. The only thing I see is my credit card info, but downloads won't pull credit card info.

I figure this out on my own.
Tap on the graphic of the book (not the chapters link in the top right corner) and the process bar with time played, remaining, and even repeat are available.
Lesson learned? If you keep tapping, eventually the solution will be found.

HT4972 Why can't I see the update download option under general? I need to download iOS 5

Why can't I see an option to download the ios5 upgrade under General settings

you can update an iPad 1 up to iOS 5.1.1 , you need to connect it to iTunes on a computer and update from there
For instructions: http://support.apple.com/kb/ht4623 and scroll down to the part that's about updating with iTunes
Please note that iPad 1 goes up to iOS 5.1.1, while iPad 2 goes up to iOS 6.1.3, the (current) latest version. You won't be able to ' choose ' iOS 5.1.1 on iPad 2, it will automatically update to the latest version possible.
Good luck
Stijn
Message was edited by: jesterwylde

Why can't it see my return value!?

I don't get it!
I've done everything right, but the test can't see my return value.
This is what i entered in...
public int countSpaces(String testString)
          int count=0;
          for(int i=0; i< testString.length(); i++)
               char ch = testString.charAt(i);
               if (Character.isWhitespace(ch))
                    count++;
          return count;
     }The test said it ran properly, but it couldn't find my return. Here's what it said...
Main.java:86: unreachable statement
return count;
+^+
+1 error+

jverd wrote:
LevelSix wrote:
I don't get it!
I've done everything right, but the test can't see my return value.Then, no, obviously you haven't done everything right.
This is what i entered in...
public int countSpaces(String testString)
          int count=0;
          for(int i=0; i< testString.length(); i++)
               char ch = testString.charAt(i);
               if (Character.isWhitespace(ch))
                    count++;
          return count;
     }The test said it ran properly, but it couldn't find my return. Here's what it said...
Main.java:86: unreachable statement
return count;
+^+
+1 error+That code cannot produce that error.
Show the method that includes line 86 and indicate which is line 86. Make sure to include the whole method.I think line 86 is....return count

HT204053 Why can't I see the "none" payment option?

There is supposed to be a payment option that says "none" underneath all of the credit card options and that is not showing up on my IPad. How can I use a non-credit card option to get free apps?

Here is a currently working method as of iTunes 11.0.4.4.
1. Open iTunes
2. Click "iTunes Store" at the upper-right side.
3. Click on "App Store" at the middle-top.
4. Scroll down and find "Top Free Apps" on the right side.
5. Click on the name of any free app (DO NOT CLICK THE FREE BUTTON).
6. Click the "Free" button on the left side under the app icon.
7. Enter your stuck Apple ID and password and click "Get".
8. When you see the "This Apple ID has not been used with the iTunes Store" popup click "Review".
9. Click "Continue".
10. Check the box for "I have read and agree to these terms and conditions" and click "Agree".
11. Click the "None" option under Payment Type. (If there is no "None" option, go back to step #5 and make sure you clicked the Name of the app, not the Free button yet).
12. Make sure the other required fields are filled out (Title, Name, Address, Phone Number)
13. Click "Continue".
14. Enjoy your unstuck Apple ID.

Why can't I see the Multicam Playback option in the TIMELINE RT pop-up menu

Im trying to be able to do realtime editing in Multicam.
Ive Created my Multiclip
I've selected OPEN in the Sync menu.
They'll plaback in the Viewer/Canvas in sync, but not with timeline
In my TIMELINE, theres NO pop-up option for
Multicam Playback in the RT tab, and I've gone to SYSTEM SETTINGS and
enabled the MULTICAM PLABACK option, still no option in RT. I think this
is somehow the problem.
Any thoughts or Help appreciated
FCP V5.0
G2 2.3
G5 2.3 Mac OS X (10.4.7)

I had to go through the manual's setup for multiclip three time (3TIMES!) before i could make everything work, it's quite frustrating the first few times, I agree.
You may need to restart the application to have all of the new settings take effect?
While not necessary, you also might want to select the multiclip keyboard layout option. it places a bunch of cool -- if indecipherably stupid iconic -- buttons in your button bars.
bogiesan

Can I auto-populate fields in a pdf form based on responses in other fields (using Acrobat XI PRO)?

I am creating a fillable pdf form using Acrobat XI Pro and would like to be able to auto-populate text fields in one section of the form based on responses entered by respondents in an earlier section. Is this possible? If so, would it function for respondents using Adobe Reader to complete the form?
Many thanks,
Andy

Thanks, George! In the form I am creating, I ask respondents to identify a number of organizations that they work with. For example, I ask "Please list up to ten organizations" and then I provide ten text boxes for organizations 1-10. I then ask a series of follow up questions (radio buttons, check boxes, and rating scales) about each organization. I would like to auto-populate the fields of those follow up questions with the names of the organizations that the respondents had written. Does that make sense? Will this require JavaScript? My hope is to avoid complicated scripts that may give respondents technical problems with the form. Thanks again,
Andy

HT1947 Why can't I see all songs for an artist when using iPad remote for home sharing music through apple tv.

Why can't I see all my songs for an artist when I search by artist using iPad remote? I'm listening to music via home sharing through apple tv using iPad 2 as my remote. All my songs seem to be listed fine under "songs", but when I select "artist" many of the songs I have for that artist are not there, any idea why that is or how I can fix this.....I suspect it's because many songs may not be associated with an album and it seems only songs in albums are displayed when I search by artist.

Thanks Ferretbite, but that's not the issue in my case, the songs are not part of a compilation. I just checked several of them and the "Part of a compilation" box is unchecked.....it seems as if the song does not have an album associated with it, it will not display under the artist when I search by artist on the iPad remote which REALLY stinks.
Hope someone else might have a solution.

Why can't I see some pictures in my library when trying to export?

Why can't I see some pictures in my library when trying to export?

Honestly, it's a bit hard to say. No need to be quite so stingy with information.
As a conundrum, I'd guess that some of your images have off-line Masters. Aperture cannot export images with off-line Masters.

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

Why can't I see shared fotostreams on my laptop

why can't I see shared photostreams on my laptop, and how do I export shared photos till f.i. fotos on my computer.

The following might help:
Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane. Then log back in and re-enable, respectively. That should jump start Photo Stream.
OT

Why can´t I see contacts and calendar events from my iPhone in my mac pro if I already registered it in the cloud?

Why can´t I see contacts and calendar events already registered in my iPhone, in my Mac Pro ? I already actualize LION OSX and selected these items in the adjustments menu of the icloud. I could do it just once, after I installed Lion OSX, but up to the moment it does not updates.

Assuming you activated iCloud, try going to Settings>iCloud and make sure Calendars and Contacts are set to ON.

Why can't I see my iPhoto files in iMovie?

[DISCLAIMER: My question is short, but my details are not. This is going to be a LONG read, but I wanted to make sure I provided all you helpful people with as much information as I could so that I could receive the best possible solution. So your patience and assistance is greatly appreciated!]
In iMovie [version 4.0.1], when I click on the Photo button to import pictures into my project from iPhoto, the following error message appears: "No photos were found. To use this feature, you must first create a photo library using iPhoto version 2.0 or later."
However... I AM using iPhoto [version 4.0.3]... with a HUGE Library containing 2000+ images and several created albums. These features work just fine within the confines of that program. They just aren't integrating with iMovie correctly. So... why can't I see my iPhoto files in iMovie?!!?!
FIRST ATTEMPT:
When I checked iMovie help, all it said was "You must open iPhoto at least one time on your computer to be able to access your iPhoto library from iMovie." I've obviously done this, having used the program plenty. Didn't work.
SECOND ATTEMPT:
When I checked this forum, the closest thread I could find that was similar to my problem suggested deleting the iMovie preferences file [com.apple.imovie3.plist]. It was later added that deleting the iPhoto preferences file [com.apple.iphoto.plist] as well had solved the problem immediately for that user. Tried it. Didn't work.
THIRD ATTEMPT:
When I checked the Apple Info site, their main solution was to try recreating the AlbumData.xml file which is used to populate the photo listing. Now this file can usually be found in the iPhoto library folder and I know how to recreate it. But THIS is where I think my main problem lies.
Unlike most users, my iPhoto Library is actually located on an external hard drive under "my hard drive name"/Pictures/iPhoto Library. When I checked this folder for the AlbumData.xml file , it simply did not exist. So as a test, I created a new iPhoto Library also on my external hard drive but the AlbumData.xml file was not created with it. I opened up iMovie just to see if it was able to browse the iPhoto library properly. But it still didn't work.
However, when I created a test iPhoto Library directly onto my Mac's hard drive, the AlbumData.xml file was indeed created with it. And when I opened up iMovie again... lo and behold, the iPhoto library finally appeared. It worked. But unfortunately, this solution still doesn't help me at all!
Thing is, I don't have enough space on my Mac's direct hard drive to move my entire iPhoto Library there (where it works). That's why I am using an external hard drive to store (more space). So is there ANY way I can keep my iPhoto Library located on my external hard drive and have the library, albums and files recognized in the other iLife applications like iMovie???
I feel I've tried everything, folks Could someone please please help me?!!?!
[my specs are listed below if that helps any]
Thanks in advance,
a very disgruntled wizkid :\
PowerBook G4 12" [1GHz, 256MB, 40GB] Mac OS X (10.3.9) GeForce FX Go5200 32MB, Matshita DVD-R UJ-816, Maxtor External Hard Drive [250GB, Firewire & USB 2.0]

My main concern at this point is that the AlbumData.xml file is unable to create itself onto the External HD. When I view the file [that I created from my test iPhoto Library on my Mac's HD] in finder, it appears to be a Final Cut Pro type of extension. Is something wrong with my External Hard Drive in that regard? Is it just incapable of storing those file types??? Hmmm...
As for the alias solution... instead of alias-ing the "Pictures" folder like you have, I've already tried creating an alias of the "iPhoto Library" folder on my External HD and placing it within the "Pictures" folder on my Mac. But when I tried to "Find Library" upon launching iPhoto, the prompt box would not allow me to choose the "iPhoto Library" alias I had created. So I couldn't open it.
To be honest, I'm not exactly sure how to create an alias correctly... or perhaps I should try alias-ing the actual "Pictures" folder (like you have) rather than just the "iPhoto Library" folder, but I don't know how to do that correctly either.
FYI... I am mounting my External HD before I launch iPhoto.
Also, I have also tried dragging the AlbumData.xml file that I created from the test iPhoto Library into my active iPhoto Library folder residing on my External HD. It would appear to be in the folder, but as soon as I clicked somewhere else in finder and than back into the folder, it would disappear. Not sure how to "point to it" either.
Karl, think maybe you could provide some hints on how to properly alias something or "point" to the AlbumData.xml file? I'd try it myself, but I don't wanna screw anything up by accident.
PS. As stated in the post above, there's a possibility my External HD is no longer Mac OS formatted... at which point I throw my hands up into the air and scream!
thanks for the tips thus far... everyone's so nice and helpful... I love it!
-the kid
PowerBook G4 12" [1GHz, 256MB, 40GB] Mac OS X (10.3.9) GeForce FX Go5200 32MB, Matshita DVD-R UJ-816, Maxtor External Hard Drive [250GB, Firewire & USB 2.0]

When I click on a link from a web page opened in Safari I get a blank black screen. Why can't I see the contents of the page?

When I click on a link from a web page opened in Safari I get a blank black screen. Why can't I see the contents of the page?

Is this any link in any page, or one particular link in a particular page?

Why can't I see an export value option in my radio button properties? I am using Acrobat X pro.

Similar Messages

Maybe you are looking for