Why can't i see my account balance after downloading itunes 10.5?

I just figured out how to get the store to fully load again, but my balance is missing from the top right-hand side of the screen (beside my username).

It sure as heck should update for you.
Has the iPad been jailbroken?

Similar Messages

  • I can no longer see the account balance on my iTunes gift card.  Why?

    Where can I find the account balance from my iTunes gift card, on my macbook pro, in the iTunes store?

    Thank you responding.  (you're the only response I received).  I did, and was doing, as you suggested.  Before the latest iTunes update, I was able to see my account balance (a whopping $9.98), but can no longer see the amount.  I've tried logging out and back into iTunes to no avail.  Same goes on my iPhone and iPod, and iPad.  The system keeps asking for credit card info, but I'm hesitant to do that.  (That's why we purchase iTunes gift cards, isn't it ?) !
    Anyway, Thank you for your assistance.  Next stop is the local Apple Store and see what the Genus bar can do. !!

  • HT1420 why can't i see a audio book i download on my iphone on my ipad

    why can't i see a audio book i download on my iphone on my ipad

    Did you put it on your ipad?
    If not, then that is why.
    Did you transfer it from your iphone to your computer?
    Did you then sync it to your ipad?
    If not, then it will not be on your ipad.

  • Why can't I open my employer email after downloading 4.0

    After downloading 4.0, I can no longer open emails on my employers system.(lotus notes) I get a message that the Domino Web Access can't respond to my request.

    If you recently updated to Mavericks and updated the Numbers to  3.0 then it is likely you are trying to open a Numbers 3.0 file with Numbers 2.3.
    Numbers 2.3                              Numbers 3.0
    Be sure you are careful about which version you are launching and using to open files.  If you want to be able to open a file in Numbers 2.3 then you should continue using Numbers 2.3 (which is located in the folder "/Applications/iWork '09")
    If you already opened a Numbers file in 3.0 and saved if but want to open in 2.3 you can export from Numbers 3.0 by using the menu item "File > Export To > Numbers '09..."

  • Why can't I see my accounts and all my folders after moving profile to new Windows ?

    Following clean install of Windows 7 over XP, I've copied across my old profile (as per instructions on this Forum, and others). Profile contains about 46 items, copy and pasted into newly created .default file. (Previous to which all new content was deleted) profile.ini appears to be pointing to correct file/location. When I launch Thunderbird, it is completely blank, no accounts etc., and no folders. The only thing showing correctly is my address book (thank goodness!) so presumably it is accessing the profile file OK ?
    Why are none of the accounts showing, or any of the (many) folders storing my old emails ?
    Can anyone point me in the right direction on this re: troubleshooting my profile file ?

    I've just about got there now, moving folders around (there appear to be three files per item) till they're more or less in the place where I want them in the Folder pane:
    (Tried to paste a screen print here, but no joy)
    Everything seemed to want to go into Local Folders, but I now have my four email accounts going into a single Inbox Folder, but in their own sub-folder.
    Strangely, the label for each is in a separate location. Still puzzled by the logic of the filepath within the profile file. Plenty of articles of where the Profile Folder should be, but nothing on the actual layout/construction of the Profile to get folders appearing where you want them ?
    Anyway, it's going to be next week before I can look anymore at this, so thank you for taking the time to respond.
    My research before all suggested that it was a simple matter of copying the profile to an external drive, reloading Windows and Thunderbird, and then copying profile back in. Its obviously far more complicated than that. I don't know what version I was on before, but the new one is 24.6.0

  • Why can´t I see Minibridge in Photoshop after the installation of Bridge

    I have successfully installed Bridge on my Macbook Air (64 bit) (Trial version of Bridge).
    Now I expected to be using Minibride from within Photoshop (CC 2014) (also a trial version), but the Minibridge option is not shown under "Files - View in Minibridge"
    I have learned that if I didn´t have the option under "Files", I could activate it under "Window - Extensions), But that button is not active.
    PS! I have a Danish version. I hope I have the names of the buttons correct.
    Hope somebody can help, as the option of viewing Minibridge inside Photoshop is my number one reason for buying Bridge.
    Kaj Krogstrup

    The word from Adobe is that "Mini Bridge" has been "Retired" as part of a "Spring Cleaning Process" because it is "Not Compatible" with the 2014 Architecture.
    Mini Bridge is still functional in previous versions but the Development Work has ceased.
    Mini Bridge is "No More"..............I missed it too and that is why I started to do some research
    Regards
    Bob Wallace
    AKA Pykcha Photography & Graphics

  • Why can't i see songs on my iPod in iTunes when connected

    I have several songs on my iPod touch that I'd like to delete, but when i plug it into my computer and open iTunes, the songs are not displayed as being on the iPod.  How do I make them visible to delete them?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Delete all music and resync. Note this is only for lter iOS versions
    To delete all music go to Settings>General>Usage>Storage>Manage Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       

  • Why can't I see my audiobook time remaining in iTunes on my iPhone 4s?

    How do I see the time remaining on my audiobook in iTunes on my iPhone 4s?

    I figure this out on my own.
    Tap on the graphic of the book (not the chapters link in the top right corner) and the process bar with time played, remaining, and even repeat are available.
    Lesson learned? If you keep tapping, eventually the solution will be found.

  • Why can't I see the "Transfer App" button in iTunes Connect when I meet all requirements?

    My App is in the "Ready to Sale" state and I can't find any transfering option in the Manage Apps screen. Is this functionality disabled?

    If you think you're golden on the requirements, then the next step is to contact Apple directly.
    You may want to be prepared for them to point out, however, that you're not as golden as you hope

  • Why can I no longer run Microsoft Office after downloading Mountain Lion?

    I recently made the jump from snow leopard to mountain lion the other day. After the installation of mountain lion was complete I noticed a number of my applications were no longer useable. The most noticeable ones were anything under microsoft office. I have been using the 2004 version of Microsoft Office  on this Mac without a single problem for four years until Mountain Lion was installed. Now when I try to open it a message pops up saying PowerPC applications are no longer supported. I was wondering if others were having the same problem or there was a solution to fix this.
    Thank you

    Welcome to Apple Communities
    PowerPC applications aren't supported in Mountain Lion. What does it mean? You have to update all your programs to an Intel edition. You can use Office 2008 or 2011, try iWork in the App Store or use LibreOffice

  • Why can't I use the fafsa website after downloading Firefox 5.0? Do I have to now uninstall the Firefox 5.0 and install their supported browers instead?

    It seems that fafsa does not support the Firefox 5.0 browser. I would need to uninstall the upgrade and install their supported browsers instead. I've encountered too many problems after installing Firefox and now I'm considering uninstalling Firefox and reinstalling Internet Explorer.

    Install Firefox Portable 3.6.18 for that website: <br />
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • I have a balance on my ITunes account, but when I try to purchase music, it says my credit card will be charged.  Why can't I see my balance

    I have a balance on my ITunes account, but when I try to purchase music, it says my credit card will be charged.  Why can't I use my current balance? and why does't it show up in the ITunes store account.  It appears on my IPhone.

    Well no, not from my experience.   Last night, with a balance of about $42 in the iTunes store (several gift cards this summer) I purchased a 4.99 app - credit card was charged, not the balance in the iTunes store.
    Barb

  • Why can I not see any of my music purchases, I have not changed my ID or account details

    Why can I not see any of my music purchases, I have not changed my ID or account details?

    Hi,
    Please enable Speakers in Playback devices as follows:
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it and set as Default
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Why can't I see my PayPal payment option in my iTunes account?

    Sorry, hit send too soon.  Tried to download from app store for last 2 days, but it said that I have to verify my PayPal account.  Nothing wrong with PayPa (verified thru PayPal) but I don't even see a PayPal option in my iTunes account.  I Remember setting it up when I got my iPad, but why can't I see it now to make changes.  The only thing I see is my credit card info, but downloads won't pull credit card info.

    I figure this out on my own.
    Tap on the graphic of the book (not the chapters link in the top right corner) and the process bar with time played, remaining, and even repeat are available.
    Lesson learned? If you keep tapping, eventually the solution will be found.

  • HT4858 why can't i see my photos in my icloud account?

    Why Can't I see my photos in my icloud account?

    Because there is no iCloud photo viewer.  You need to move them to your computer or your iOS device to view them.  Photo stream is just a mechanism to share photo's across multiple devices - it is not an online permanent storage, nor an online viewer feature.
    Photo stream storage space is not even part of your personal iCloud account - it is separate, intended for temporary (max. 30 days) storage of photos solely to allow you to copy them onto other devices.
    See the photo stream FAQ - http://support.apple.com/kb/HT4486

Maybe you are looking for

  • Mapping: constant to integer field

    Hello, I've a integer field in target. I've need mapping to constant value. How can i do it? Now,  i've: constant   ->   integer field    5   in SXMB_MONI i can see the message with status waiting and no change i suppose that this value (constant) is

  • NSU 1.3.20en - ? Application Still Running

    Hi All On two occasions after using NSU to check for updates (there were none) I exited application, it indicates phone connected to PC Suite by usb (ok so far) and then I disconnect phone. However when I come to close down PC there is something stil

  • Is there any FM or BAPI to capture the action in CRMD_ORDER?

    Hi All, In CRMD_ORDER transaction, I need to know the action selected by the user like CREATE TRANSPORT OF COPIES, LOGON TO SYSTEM etc. Is there any FM or BAPI available to capture this action details? Thanks in advance.

  • I downloaded the software for my All in One B-209-a printer on my HP G72 Windows 7 64 bit notebook

    I downloaded and then uninstalled the software and drivers for my Photosmart Plus M-209a per support instructions I know 25 times. When I go the Start then All Programs and click on HP I can't find the printer or the Solution Center. I checked Device

  • Timed Loop in Shared Lib caused LabWindow program to NOT exit

    I have a shared Lib created in LabView that I call from LabWindows.  If I create a VI with nothing but a Timed Loop and no other code, my Labwindows program will not terminate.  (Even if I don't call the library function (VI) containing the Timed Loo