Why can't I see my camera calibration profiles

I am trying to use a camera profile created in Adobe Dng profiler to correct my infrared GX1. Also trying to use other downloaded profiles for my camera.
I have created a new folder with the other profile folders:- C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.4\Resources\CameraProfiles\Camera\Panasonic DMC-GX1 and placed my profile in there.
When I look at the profiles drop-down I only see 'Adobe Standard' I cannot see my (or any other) profiles.
I am using the latest version 5.4 and working with Panasonic .RW2 raw files
Any help much appreciated !

Thank you! I found out where it was located in.
ssprengel wrote:
If you are asking about custom-created profiles, check this page, for the location of custom camera and lens profiles: http://www.lightroomqueen.com/articles-page/lightroom-5-default-locations/
If you are asking about Adobe-supplied profiles, they will be installed every time you update the software so there’s no need to copy them, anywhere, and the reason for not seeing them would be that the current photo is not a raw file since most profiles are only for raw not jpg.
I found it in here:
Your custom Camera Raw & Lens Profiles should be installed to the User folders…
Lightroom 5 no longer uses the shared ProgramData (Windows) / Application Support (Mac) folders for Camera or Lens Profiles. Instead, it stores the built-in profiles with its program files.
When you create camera or lens profiles, they must be stored in the user locations listed below. If you previously stored custom profiles in other locations, you’ll need to move them to these user folders, otherwise Lightroom won’t be able to find them.
Windows—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.
The camera and lens profile file extensions are:
.dcpr—camera profile recipe file used for creating/editing a profile in the DNG Profile Editor
.dcp—camera profile
.lcp—lens profile
Thanks again for responding.

Similar Messages

Why can't I see my camera roll in photo on my iPhone 4?

Why can't I see my camera roll in photo on my iphone 4?

Hi,
This Discussion could be Helpful...
https://discussions.apple.com/message/15280355#15280355
Cheers,

Why can I only see my Camera Roll when uploading photos?

Trying to upload pictures to Facebook but when I click the camera I can only see the camera roll, can't see any of my albums.
Any help would be appreciated.

If you go to system preferences and then displays you'll get all the options for adjusting what you are asking for. I also use a TV for the same purpose you are describing. I find it works best to leave it in the manner you are describing. Mirroring just duplicates everything unless of course that is the effect you are going for. You can also adjust the positioning of the monitors in the relation to each other weather you want one on the left or right or which one to be the main and secondary. Then all you will need to do is swipe the media player onto the other monitor and then your main monitor will be free to use while you watch your videos on the other. Essentially, your desktop area will span your computer monitor and the TV screen you can also change the desktop image on both screens to different images they don't need to be the same. I watch a lot of TV shows I have in itunes. This way I can watch TV and still use my computers main monitor for the internet or whatever.

Why can't I see my camera on the desktop?

In the past my cameras connected via USB would show up both in iPhoto and the desktop. At some point this option seems to have been revoked and I can no longer view it as a drive on the destop if I want. Is there any way to make my camera show up as a drive?

Andy,
You will need to do roughly the following :
Install CAM on a host of your choice to manage the array.
Assign an IP address to the array using the serial management interface (or DHCP)
Register the Array's IP address with CAM.
Connect the Hosts fibre card(s) to the array host ports
Install the HBA drivers on the server you want to connect.
In CAM you will need to create initiators for the HBA ports. (Do you have a domain license or are you going to use the global domain?)
Create a host in CAM for the initiators.
Create a Virtual Disk
Create a Volume on the Virtual Disk
Map the volume to the host you defined before
You will also need multipathing software installed if you have more than one fibre connection from the host.
Take a look here on docs.sun.com for more info on CAM. http://docs.sun.com/app/docs/doc/821-1425-10
Scott.

Why can't i see cover photos on profiles on Facebook ap

All of a sudden I can't seem to see any cover photos on any profiles on the Facebook ap including mine. I've deleted and re installed the ap, reset my phone and even restored factory settings then restored back up from my laptop. Besides that aps keep closing randomly and if I'm listening to music it goes off if I open up Facebook. Someone Help! Thanks in advance.

Try this:
Quit all apps: Double tap the Home button and swipe the app preview page up for each open app
Sign out of Facebook here: Settings > Facebook > Tap your name then Delete Account
Delete the Facebook app
Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
Reinstall the Facebook app
Sign back in here: Settings > Facebook

Can't get any camera calibration profiles to show up

I am using lightroom 5 on a windows 8 pc and can not get any camera calibration profiles to show up. I have 14 profiles for my Sony SLT-A65 in my cameraprofiles folder and a corresponding camera folder with also has these profiles. I have checked all file attributes and the only thing I see differrent from some other camera profiles is the file ownership is adminisrator instead of system. Also Photoshop does not see any camera calibration profiles either. I have done a lightroom installation repair from original disk which didn't fix. I have all my lens profiles which work fine. I have tried renaming profiles from SLT-A65V to SLT-A65 to match what shows up on displayed file information. Can't think of anything else. Can anyone help??

I have since corrected this issue. I downloaded adobe DNG profile editor and loaded the camera profiles I had and then saved them. At this point all of them showed up in Photoshop and Lightroom. Don't know what the difference was but they are seen now by my programs.
Thanks for the reply

I have downloaded and installed Photoshop Elements 11 on my new Macbook Pro. Why can't I see my scanner (Epson Perfection 3200 Photo) from the File Import menu?

I have downloaded and installed Photoshop Elements 11 on my new Macbook Pro. Why can't I see my scanner (Epson Perfection 3200 Photo) from the File>Import menu?

There was no driver update available (it said my driver was up to date), so I just deleted the scanner and restarted the computer. when it came up, the scanner had already been added again. With great anticipation I tried to import from Photoshop...but no luck (scanner was not visible). I finally ended up calling Epson (had great difficulty in locating a number for support) and they finally told me there is no driver update for OS X 10.10 and I should as a work around use "Image Capture" application. I tried it, and it works quite well.

HT201077 Why can't I see my pictures in photostream on my iPad I took on my iPhone

Why can't I see my pictures in photostream on my iPad I took on my iPhone

It may be because photo stream only keeps photos for 30 days, even though thry remain on your device until you delete them. If you enabled photo stream on your iPad after you enabled it on your iPhone, you would only receive the photos from the last 30 days, as ealier photos are no longer there.
If that's not the issue, try saving the photo stream photos on your iPhone to your camera roll (tap Edit, tap all the photos, tap Share, tap Save to Camera Roll), then go to Settings>iCloud and turn photo stream Off, wait a minute or so, then turn it back On. Then take a new photo on your phone, close the camera app, then while connected to wifi see if it appears on your iPad in a minute or so.

Why can´t I see contacts and calendar events from my iPhone in my mac pro if I already registered it in the cloud?

Why can´t I see contacts and calendar events already registered in my iPhone, in my Mac Pro ? I already actualize LION OSX and selected these items in the adjustments menu of the icloud. I could do it just once, after I installed Lion OSX, but up to the moment it does not updates.

Assuming you activated iCloud, try going to Settings>iCloud and make sure Calendars and Contacts are set to ON.

HT1947 Why can't I see all songs for an artist when using iPad remote for home sharing music through apple tv.

Why can't I see all my songs for an artist when I search by artist using iPad remote? I'm listening to music via home sharing through apple tv using iPad 2 as my remote. All my songs seem to be listed fine under "songs", but when I select "artist" many of the songs I have for that artist are not there, any idea why that is or how I can fix this.....I suspect it's because many songs may not be associated with an album and it seems only songs in albums are displayed when I search by artist.

Thanks Ferretbite, but that's not the issue in my case, the songs are not part of a compilation. I just checked several of them and the "Part of a compilation" box is unchecked.....it seems as if the song does not have an album associated with it, it will not display under the artist when I search by artist on the iPad remote which REALLY stinks.
Hope someone else might have a solution.

Why can't I see my iPhoto files in iMovie?

[DISCLAIMER: My question is short, but my details are not. This is going to be a LONG read, but I wanted to make sure I provided all you helpful people with as much information as I could so that I could receive the best possible solution. So your patience and assistance is greatly appreciated!]
In iMovie [version 4.0.1], when I click on the Photo button to import pictures into my project from iPhoto, the following error message appears: "No photos were found. To use this feature, you must first create a photo library using iPhoto version 2.0 or later."
However... I AM using iPhoto [version 4.0.3]... with a HUGE Library containing 2000+ images and several created albums. These features work just fine within the confines of that program. They just aren't integrating with iMovie correctly. So... why can't I see my iPhoto files in iMovie?!!?!
FIRST ATTEMPT:
When I checked iMovie help, all it said was "You must open iPhoto at least one time on your computer to be able to access your iPhoto library from iMovie." I've obviously done this, having used the program plenty. Didn't work.
SECOND ATTEMPT:
When I checked this forum, the closest thread I could find that was similar to my problem suggested deleting the iMovie preferences file [com.apple.imovie3.plist]. It was later added that deleting the iPhoto preferences file [com.apple.iphoto.plist] as well had solved the problem immediately for that user. Tried it. Didn't work.
THIRD ATTEMPT:
When I checked the Apple Info site, their main solution was to try recreating the AlbumData.xml file which is used to populate the photo listing. Now this file can usually be found in the iPhoto library folder and I know how to recreate it. But THIS is where I think my main problem lies.
Unlike most users, my iPhoto Library is actually located on an external hard drive under "my hard drive name"/Pictures/iPhoto Library. When I checked this folder for the AlbumData.xml file , it simply did not exist. So as a test, I created a new iPhoto Library also on my external hard drive but the AlbumData.xml file was not created with it. I opened up iMovie just to see if it was able to browse the iPhoto library properly. But it still didn't work.
However, when I created a test iPhoto Library directly onto my Mac's hard drive, the AlbumData.xml file was indeed created with it. And when I opened up iMovie again... lo and behold, the iPhoto library finally appeared. It worked. But unfortunately, this solution still doesn't help me at all!
Thing is, I don't have enough space on my Mac's direct hard drive to move my entire iPhoto Library there (where it works). That's why I am using an external hard drive to store (more space). So is there ANY way I can keep my iPhoto Library located on my external hard drive and have the library, albums and files recognized in the other iLife applications like iMovie???
I feel I've tried everything, folks Could someone please please help me?!!?!
[my specs are listed below if that helps any]
Thanks in advance,
a very disgruntled wizkid :\
PowerBook G4 12" [1GHz, 256MB, 40GB] Mac OS X (10.3.9) GeForce FX Go5200 32MB, Matshita DVD-R UJ-816, Maxtor External Hard Drive [250GB, Firewire & USB 2.0]

My main concern at this point is that the AlbumData.xml file is unable to create itself onto the External HD. When I view the file [that I created from my test iPhoto Library on my Mac's HD] in finder, it appears to be a Final Cut Pro type of extension. Is something wrong with my External Hard Drive in that regard? Is it just incapable of storing those file types??? Hmmm...
As for the alias solution... instead of alias-ing the "Pictures" folder like you have, I've already tried creating an alias of the "iPhoto Library" folder on my External HD and placing it within the "Pictures" folder on my Mac. But when I tried to "Find Library" upon launching iPhoto, the prompt box would not allow me to choose the "iPhoto Library" alias I had created. So I couldn't open it.
To be honest, I'm not exactly sure how to create an alias correctly... or perhaps I should try alias-ing the actual "Pictures" folder (like you have) rather than just the "iPhoto Library" folder, but I don't know how to do that correctly either.
FYI... I am mounting my External HD before I launch iPhoto.
Also, I have also tried dragging the AlbumData.xml file that I created from the test iPhoto Library into my active iPhoto Library folder residing on my External HD. It would appear to be in the folder, but as soon as I clicked somewhere else in finder and than back into the folder, it would disappear. Not sure how to "point to it" either.
Karl, think maybe you could provide some hints on how to properly alias something or "point" to the AlbumData.xml file? I'd try it myself, but I don't wanna screw anything up by accident.
PS. As stated in the post above, there's a possibility my External HD is no longer Mac OS formatted... at which point I throw my hands up into the air and scream!
thanks for the tips thus far... everyone's so nice and helpful... I love it!
-the kid
PowerBook G4 12" [1GHz, 256MB, 40GB] Mac OS X (10.3.9) GeForce FX Go5200 32MB, Matshita DVD-R UJ-816, Maxtor External Hard Drive [250GB, Firewire & USB 2.0]

When I click on a link from a web page opened in Safari I get a blank black screen. Why can't I see the contents of the page?

When I click on a link from a web page opened in Safari I get a blank black screen. Why can't I see the contents of the page?

Is this any link in any page, or one particular link in a particular page?

Why can't I see my external hard drive, Intel iMac / 500 GB, G-Drive

Why can't I see my external hard drive? I have a new iMac, Intel based i5, running Lion (2-3 months old). I have a 500 GB G-Drive external hard drive that has showed up when connected to my iMac for the past 2-3 months. Now it's gone. It's NOT visible when using Disk Utilities. I have all of the radio buttons chosen in the Finder Preferences. I've unplugged and replugged in the drive, have switched the cable ports and have switched firewire cable. The G-Drive powers up and whirls, so I don't believe the problem is with the drive. Yes, I set my Preferences to make sure ALL disk types are visible. I've restarted my iMac on a number of occations. I rest my SMC by totally unplugging my iMac for a minute, then plugging it back in. Any suggestions?

Unplug the HD, Zap the PRAM, reconnect the HD, power it up, and see if that fixes the problem. If not, then maybe the HDs bitten the dust. Try on another computer to verify.

Why can't I see an export value option in my radio button properties? I am using Acrobat X pro.

Why can't I see an export value option in my radio button properties? I am using Acrobat X pro.

Thanks so much. Thought it was just the name of the button and did not realize it was the value. Now able to use them for calculations.

Why can not I see the name of a child process?

Hi,
I implemented a program for my project.
My program has two processes. One is a parent process. Another is a child process.
The parent process forks its child process. The child process is executed by execl() system call.
The program code implemented is followed.
=== abbreviation ===
switch(itmr_forkid = fork()) {
case 0:
RCode = execl("./itmr", "itmr", (char *) 0);
exit(0);
break;
=== abbreviation ===
I executed the program. And then I pressed "ps -ef" on command line.
[stp1ggsn1][user/shlim] ps -ef
UID PID PPID C STIME TTY TIME CMD
root 29402 29376 38 Mar 06 pts/0 11376:36 ibgfb
root 29403 29402 0 Mar 06 pts/0 0:15
However, why can not I see itmr process name for the child process?
When I executed the program for the parent process and the program for the child process respectively, I can see itmr process name for the child process.
I tried to look for the cause. But I could not find out the answer.
Please, give me your answer. Thank you for your answer in advance.

Hi,
I am sorry that I loaded my question two times by mistake.

Why can't I see my camera calibration profiles

Similar Messages

Maybe you are looking for