Why can't I see my camera on the desktop?

In the past my cameras connected via USB would show up both in iPhoto and the desktop.  At some point this option seems to have been revoked and I can no longer view it as a drive on the destop if I want.  Is there any way to make my camera show up as a drive?

Andy,
You will need to do roughly the following :
Install CAM on a host of your choice to manage the array.
Assign an IP address to the array using the serial management interface (or DHCP)
Register the Array's IP address with CAM.
Connect the Hosts fibre card(s) to the array host ports
Install the HBA drivers on the server you want to connect.
In CAM you will need to create initiators for the HBA ports. (Do you have a domain license or are you going to use the global domain?)
Create a host in CAM for the initiators.
Create a Virtual Disk
Create a Volume on the Virtual Disk
Map the volume to the host you defined before
You will also need multipathing software installed if you have more than one fibre connection from the host.
Take a look here on docs.sun.com for more info on CAM. http://docs.sun.com/app/docs/doc/821-1425-10
Scott.

Similar Messages

  • Why can't I see my camera roll in photo on my iPhone 4?

    Why can't I see my camera roll in photo on my iphone 4?

    Hi,
    This Discussion could be Helpful...
    https://discussions.apple.com/message/15280355#15280355
    Cheers,  

  • Why can't I see full reviews in the App Store?

    Why can't I see full reviews in the App Store? Every review that is longer than 6 lines has three dots, indicating more, but nowhere to click to see the rest of the review.

    Thank you.  I only saw the word "More" on one review of one app that I looked at, and I knew to click on that. But many reviews of several apps had three dots at the end of the sixth line without the word "More".  And it was obvious there was more written because it was, for example, left in the middle of a sentence.

  • Why can't I see still images in the playback monitor when editing a video?

    Why can't I see still images in the playback monitor when editing a video? I have rendered the images in the project.  I checked my system to make sure it meets all the requirements for the software, no problem there.  When I "share" the project and save it as an MPEG, the images show up in WMP just fine.  But I need to be able to see what I'm doing to the stills while I am editing.  Help!

    Gordon
    Many thanks for the reply with the details.
    But, the key is missing...what version of Premiere Elements are you using? Are you using Premiere Elements 10?
    I hope not in this case, but if you are, we will tell you what needs to be done. The following is a copy/paste of the Announcement
    at the top of this forum about the Premiere Elements 10/NVIDIA GeForce issue.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back
    can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    Looking forward to your reply.
    Thank you.
    ATR

  • Why can't I actually put widgets on the desktop?

    Why can't I actually put widgets on the desktop and have stay on the desktop; not float on top of all my programs so I can’t see what I am doing?
    I know there are a few widgets that claim to do this, but they don’t! (Dashit)
    Here is the main problem that I have with Dashit; it doesn’t go on the desktop, it floats on top of every program and you can’t make it actually put it on the Desktop! This makes this little widget useless! Why can’t anybody make a widget that actually puts the widgets on the desktop?
    What use is it if the darn things just float on top of every program? This just gets in the way. Dose anyone know of a widget or a way to actually put the widgets on the desktop?

    Garret, the only way to put Dashboard widgets on the desktop and select the level they live in (so they don't float over everything) is to use either Amnesty Widget Browser or Amnesty Singles. Both are shareware.
    Disclaimer: I may receive some form of compensation, financial or otherwise, from my recommendation or link [my company developed Amnesty].

  • Why can I only see my Camera Roll when uploading photos?

    Trying to upload pictures to Facebook but when I click the camera I can only see the camera roll, can't see any of my albums.
    Any help would be appreciated.

    If you go to system preferences and then displays you'll get all the options for adjusting what you are asking for. I also use a TV for the same purpose you are describing. I find it works best to leave it in the manner you are describing. Mirroring just duplicates everything unless of course that is the effect you are going for. You can also adjust the positioning of the monitors in the relation to each other weather you want one on the left or right or which one to be the main and secondary. Then all you will need to do is swipe the media player onto the other monitor and then your main monitor will be free to use while you watch your videos on the other. Essentially, your desktop area will span your computer monitor and the TV screen you can also change the desktop image on both screens to different images they don't need to be the same. I watch a lot of TV shows I have in itunes. This way I can watch TV and still use my computers main monitor for the internet or whatever.

  • Why can't I see my videos on the computer?

    I connect the iPod and I can play all songs on my computer, I can also hear the sound of the video but I can't see it I just see some green colore blinking on the screen... I have iTunes 7... can some one help please?

    Andy,
    You will need to do roughly the following :
    Install CAM on a host of your choice to manage the array.
    Assign an IP address to the array using the serial management interface (or DHCP)
    Register the Array's IP address with CAM.
    Connect the Hosts fibre card(s) to the array host ports
    Install the HBA drivers on the server you want to connect.
    In CAM you will need to create initiators for the HBA ports. (Do you have a domain license or are you going to use the global domain?)
    Create a host in CAM for the initiators.
    Create a Virtual Disk
    Create a Volume on the Virtual Disk
    Map the volume to the host you defined before
    You will also need multipathing software installed if you have more than one fibre connection from the host.
    Take a look here on docs.sun.com for more info on CAM. http://docs.sun.com/app/docs/doc/821-1425-10
    Scott.

  • Why can't I see these results in the results grid

    If I run the pl/sql below as a script F5 I can see the results of the "select * from TestOutput", but If I execute it with F9 I don't see any results in the results grid. Anybody know why? Thanks in advance for any help.
    CREATE TABLE TestOutput (val1 varchar2(50), val2 varchar2(255) , numval1 NUMBER, numval2 NUMBER);
    DECLARE
    SomeText VARCHAR2(255);
    BEGIN
    SomeText := 'Hello';
    INSERT INTO TestOutput VALUES ('yadayada', SomeText, 1, 1);
    INSERT INTO TestOutput VALUES ('yadayada', SomeText, 2, 2);
    INSERT INTO TestOutput VALUES ('yadayada', SomeText, 3, 3);
    END;
    select * from TestOutput;
    drop table TestOutput;

    I think that you he is executing all the commands of a time, selecting everything and click in F9 or F5.
    If he will be this, this behavior is correct.
    Ps.:
    F5 - scripts.
    F9 - alone statements (not to be that they are separate for semicolons).

  • Why can't I see my podcast in the iTunes store

    When I click on the link provided by Apple I see my podcast in the iTunes store, but when I just try to drill down to it through the iTunes menus I can't find it. I've noticed that there seems to be a maximum of five pages of podcasts for each category. Does this mean that there are other podcasts out there that you just can't get to without doing a search or something?

    Run Software update from the Apple menu or update yrou signature (it shows 10.8.2).
    What country store?

  • Why can't I see my video in the timeline?

    I can hear the audio but can't get the video to play in the time line, how can I get it to show in the source window?

    Have you used one of these methods to create a Sequence?
    Be sure that your Sequence settings match your footage by doing this:
    Or, right-click a media file and select 'New Sequence From Clip".
    How do I choose the right sequence settings?
    http://www.video2brain.com/en/lessons/how-do-i-choose-the-right-sequence-settings
    http://forums.adobe.com/thread/1285921

  • Why can't I see my camera calibration profiles

    I am trying to use a camera profile created in Adobe Dng profiler to correct my infrared GX1. Also trying to use other downloaded profiles for my camera.
    I have created a new folder with the other profile folders:-  C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.4\Resources\CameraProfiles\Camera\Panasonic DMC-GX1 and placed my profile in there.
    When I look at the profiles drop-down I only see 'Adobe Standard' I cannot see my (or any other) profiles.
    I am using the latest version 5.4 and working with Panasonic .RW2 raw files
    Any help much appreciated !

    Thank you! I found out where it was located in.
    ssprengel wrote:
    If you are asking about custom-created profiles, check this page, for the location of custom camera and lens profiles:  http://www.lightroomqueen.com/articles-page/lightroom-5-default-locations/
    If you are asking about Adobe-supplied profiles, they will be installed every time you update the software so there’s no need to copy them, anywhere, and the reason for not seeing them would be that the current photo is not a raw file since most profiles are only for raw not jpg.
    I found it in here:
    Your custom Camera Raw & Lens Profiles should be installed to the User folders…
    Lightroom 5 no longer uses the shared ProgramData (Windows) / Application Support (Mac) folders for Camera or Lens Profiles. Instead, it stores the built-in profiles with its program files.
    When you create camera or lens profiles, they must be stored in the user locations listed below. If you previously stored custom profiles in other locations, you’ll need to move them to these user folders, otherwise Lightroom won’t be able to find them.
    Windows—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
    Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
    For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.
    The camera and lens profile file extensions are:
    .dcpr—camera profile recipe file used for creating/editing a profile in the DNG Profile Editor
    .dcp—camera profile
    .lcp—lens profile
    Thanks again for responding.

  • How can I import RW2 files into Lightroom 4?Also why can`t I see jpgs related to the same RW2 files?

    I tried ti import my RW2 camera (Lumix) raw files into Lightroom 4.4 and simply couldn`t do it. Also I had jpgs in the same folder and Lightroom didn`t bring them in at all.
    What can I do? Is there any ways or settings? Does Lightroom 5 see RW2?
    Thanks

    What Jim said.
    Either:
    Upgrade to Lightroom 5 then open the RW2 files in LR5, or
    Download the free Adobe DNG converter, convert all RW2 files to DNGs then edit the DNGs in Lightroom 4
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

  • Why can't i see my files in the bookmark folders in safari

    I can see my folders in my Safari bookmarks but now I can't see the files in the folders.  What have I done????

    As you can see I have folders in the bookmarks categories.  Each folder has multiple files in it.  Previously I could open the folders on the side and choose a bookmark to go to.  Now, I can open the folder and I have to scroll through the files on the screen.  Did I change some setting that I can't find?

  • Why can't I see any Apps in the iTunes App Store?

    When I go to the iTunes Store, I can see selections for all categories (Music, TV, Movies, Books, etc) but App Store is blank.  I have tried to sign into my account, but it endlessly rejects my password.  Password works everyplace else - iPhone, iPad, all Purchases etc.  HELP!

    Run Software update from the Apple menu or update yrou signature (it shows 10.8.2).
    What country store?

  • Why can't I see my media in the left sidebar when using finder?

    I recently made the switch to Mac and I have some confusion. When using finder, I am not getting an option to browse through my media such as photos, videos and music. How do I get these folders to appear on my sidebar?
    Thankyou.

    N8 Thomas wrote:
    I then went into my finder preference section and changed my "New finder window show" to my computer's name.  At that point I could view and find anything within it.  this part got the job done. 
    "You don't, they only appear in open file dialogs and in tool panels like in iMovie, iPhoto.
    To view your media, you open the app that you use to manage that type of media." this on the other hand was zero help
    What you did doesn't show the Media Browser. It just shows the folders where your media is stored. You may be correct that was all that cobacc wanted. 
    The Media Browser shows the actual media in thumbnails so that you can preview the media.
    However, neither requires any Sharing services to be enabled.

Maybe you are looking for

  • GR/IR automatic clearing

    There are some invoices that are blocked because of differences of less than 10 USD. Where should I set the tolerances to get these auto-cleared. Thank you Krishna

  • Movie with Sound in Logic

    I have a .mov file. I know how to open it in logic to do sound design work. Is there any way to open it in Logic and import the existing embedded sound without using Soundtrack Pro?

  • Saving a pdf as grayscale

    Hi, I'm creating a black and white newspaper ad. There is no color in my file and all the placed psd files are in grayscale, however I can't figure out how to convert the color output settings to grayscale when I save it as a pdf. I'm sure it's somet

  • Xbox live to macbook pro

    I was wondering if there was any way i could connect my xbox to my macbook pro which is connected wirelessly to the internet trhoughg a router, and get xbox live to work. It says my IP ADRESS is failing.

  • "DELETE" key to "RETURN"

    On a new MacBook Air I'm using the Ukelele key layout for Devanagari to map Dvorak. But when I was on the Aluminum 3G I was able to only switch the "DELETE" key with the "RETURN" key through the system somewhere. Ukelele has maybe updated itself and