Why can't i see my files in the bookmark folders in safari
I can see my folders in my Safari bookmarks but now I can't see the files in the folders. What have I done????
As you can see I have folders in the bookmarks categories. Each folder has multiple files in it. Previously I could open the folders on the side and choose a bookmark to go to. Now, I can open the folder and I have to scroll through the files on the screen. Did I change some setting that I can't find?
Similar Messages
-
Why can't I see full reviews in the App Store?
Why can't I see full reviews in the App Store? Every review that is longer than 6 lines has three dots, indicating more, but nowhere to click to see the rest of the review.
Thank you. I only saw the word "More" on one review of one app that I looked at, and I knew to click on that. But many reviews of several apps had three dots at the end of the sixth line without the word "More". And it was obvious there was more written because it was, for example, left in the middle of a sentence.
-
Why can't I see still images in the playback monitor when editing a video?
Why can't I see still images in the playback monitor when editing a video? I have rendered the images in the project. I checked my system to make sure it meets all the requirements for the software, no problem there. When I "share" the project and save it as an MPEG, the images show up in WMP just fine. But I need to be able to see what I'm doing to the stills while I am editing. Help!
Gordon
Many thanks for the reply with the details.
But, the key is missing...what version of Premiere Elements are you using? Are you using Premiere Elements 10?
I hope not in this case, but if you are, we will tell you what needs to be done. The following is a copy/paste of the Announcement
at the top of this forum about the Premiere Elements 10/NVIDIA GeForce issue.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back
can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Looking forward to your reply.
Thank you.
ATR -
Why can't i import AVCHD files via the Media browser?
Why can't i import AVCHD files via the Media browser ? (Right click on the AVCHD file and imported, got the "format not supported" message.) I can import through the File-Import way ( I can get down tot he BDMV folder and mts files) but read using the Media Browser is the preferred way.
No you need the private folder. This will open in the Browser.
Dont open just click. -
Why can't I see these results in the results grid
If I run the pl/sql below as a script F5 I can see the results of the "select * from TestOutput", but If I execute it with F9 I don't see any results in the results grid. Anybody know why? Thanks in advance for any help.
CREATE TABLE TestOutput (val1 varchar2(50), val2 varchar2(255) , numval1 NUMBER, numval2 NUMBER);
DECLARE
SomeText VARCHAR2(255);
BEGIN
SomeText := 'Hello';
INSERT INTO TestOutput VALUES ('yadayada', SomeText, 1, 1);
INSERT INTO TestOutput VALUES ('yadayada', SomeText, 2, 2);
INSERT INTO TestOutput VALUES ('yadayada', SomeText, 3, 3);
END;
select * from TestOutput;
drop table TestOutput;I think that you he is executing all the commands of a time, selecting everything and click in F9 or F5.
If he will be this, this behavior is correct.
Ps.:
F5 - scripts.
F9 - alone statements (not to be that they are separate for semicolons). -
Why can't I see my accounts and all my folders after moving profile to new Windows ?
Following clean install of Windows 7 over XP, I've copied across my old profile (as per instructions on this Forum, and others). Profile contains about 46 items, copy and pasted into newly created .default file. (Previous to which all new content was deleted) profile.ini appears to be pointing to correct file/location. When I launch Thunderbird, it is completely blank, no accounts etc., and no folders. The only thing showing correctly is my address book (thank goodness!) so presumably it is accessing the profile file OK ?
Why are none of the accounts showing, or any of the (many) folders storing my old emails ?
Can anyone point me in the right direction on this re: troubleshooting my profile file ?I've just about got there now, moving folders around (there appear to be three files per item) till they're more or less in the place where I want them in the Folder pane:
(Tried to paste a screen print here, but no joy)
Everything seemed to want to go into Local Folders, but I now have my four email accounts going into a single Inbox Folder, but in their own sub-folder.
Strangely, the label for each is in a separate location. Still puzzled by the logic of the filepath within the profile file. Plenty of articles of where the Profile Folder should be, but nothing on the actual layout/construction of the Profile to get folders appearing where you want them ?
Anyway, it's going to be next week before I can look anymore at this, so thank you for taking the time to respond.
My research before all suggested that it was a simple matter of copying the profile to an external drive, reloading Windows and Thunderbird, and then copying profile back in. Its obviously far more complicated than that. I don't know what version I was on before, but the new one is 24.6.0 -
Why can't I see my podcast in the iTunes store
When I click on the link provided by Apple I see my podcast in the iTunes store, but when I just try to drill down to it through the iTunes menus I can't find it. I've noticed that there seems to be a maximum of five pages of podcasts for each category. Does this mean that there are other podcasts out there that you just can't get to without doing a search or something?
Run Software update from the Apple menu or update yrou signature (it shows 10.8.2).
What country store? -
Why can't I access any files on the other computers
I am currently having trouble retrieving files from other local computers within my area that have Airport cards installed on them (as well as this computer I am currently using, which has the base). While it shows that I have a good connection between the computers on the network, I am unable to access any files from said computers externally, only the local servers show up. Is there any way to remedy this?
Problems with buttons and links at the top of the page not working can be caused by an extension like the Yahoo! Toolbar or a Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode -
Why can't I see my video in the timeline?
I can hear the audio but can't get the video to play in the time line, how can I get it to show in the source window?
Have you used one of these methods to create a Sequence?
Be sure that your Sequence settings match your footage by doing this:
Or, right-click a media file and select 'New Sequence From Clip".
How do I choose the right sequence settings?
http://www.video2brain.com/en/lessons/how-do-i-choose-the-right-sequence-settings
http://forums.adobe.com/thread/1285921 -
Why can't I upload pdf files into the US District Court CM/ECF system?
Since the last update to Firefox, I cannot upload pdf files into the Federal Court's e-filing system. When I press the browse file button, all the files (except jpg) files appear inactive and I cannot click on any file, esp. pdf files to upload. I tried it with Safari and had no trouble. I need this resolved asap as I routinely have done all my e-filing with Firefox. I had no issues in the past until the recent update. Thank you.
The Bankruptcy Court announced a few months ago that updated versions of Firefox would not work with the ECF system. You have to download an older version of Firefox. I was able to download Firefox 3.6.19 and I run that only for bankruptcy filings.
I know it doesn't make sense, but it works.
Many people are evidently having the same trouble. I have no idea why the court system doesn't run software that works with the latest versions of Firefox. Or why the latest versions of Firefox don't work with the courts.
I'm looking for a way to notify Firefox and to ask them to fix.
Incidentally, over Labor Day weekend, the Bankruptcy Court - at least in Oregon - did a major software overhaul. But they didn't fix the Firefox issue. -
Why can't I see my files in Finder, using Lion?
Hi - I'm running Lion 10.7.2 and have noticed in Finder that the contents of many folders aren't visible. This seems to be for newer files added. For example, I copied a folder from a thumb drive, into my (username) -> (Documents) folder. I see that folder name, but there are no files inside. When I "Get Info" about that folder, it tells me, as expected, there are 30 items, and almost a MB of data. Furthermore, when I back up to SuperDuper, I can actually see what I'm looking for - all files are there in that folder and for every other folder! In addition, searching in Spotlight finds any/all of the files contained within the folder.
My problem, again, is that no files, none, not one, are visible in various folders, yet they exist, and are retrievable, via Spotlight.
Should I do a disk check, or other recommended procedures?
Thanks for any help!
Model Name: iMac
Model Identifier: iMac9,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.93 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 6 MB
Memory: 8 GB
Bus Speed: 1.07 GHzI'm never going to believe this. I rebooted, and now, can see all my files. Hope someone else benefits from this newfound discovery!
-
Why can't i see my files when i connect to my lcd projector?
after i upgraded to Yosemite, i connected my laptop to my projector using the apple adapter. once i connected the only thing i could see was the picture i have on my desktop. I couldn't see any of my files or folders. when i opened a web browser, i couldn't see it on the projector screen. I could see all of these things on my laptop screen, but it is not projecting anything, just my desktop picture. what can i do to be able to use my laptop when it is connected to my projector?
Did you turn on mirroring?
Also
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support -
I tried ti import my RW2 camera (Lumix) raw files into Lightroom 4.4 and simply couldn`t do it. Also I had jpgs in the same folder and Lightroom didn`t bring them in at all.
What can I do? Is there any ways or settings? Does Lightroom 5 see RW2?
ThanksWhat Jim said.
Either:
Upgrade to Lightroom 5 then open the RW2 files in LR5, or
Download the free Adobe DNG converter, convert all RW2 files to DNGs then edit the DNGs in Lightroom 4
http://www.adobe.com/products/photoshop/extend.displayTab2.html -
Why can't I see a file sent to me in acrobat
Someone has sent me a file to vote in acrobat but I cannot find it?
How did it get sent? Normally you would receive files from others by e-mail, though PDFs have to be properly encoded when sent by e-mail.
-
Why can't I see PDF files in Safari with new Lion OS?
I installed Lion. Now when I click on bank statements and forms that are attached to web pages, they come out black! Like this one:
http://www.whitewaterchallengers.com/lehigh/waiver_form.pdf
JSIn the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, delete any items that have a name beginning with “AdobePDF”. Then quit and relaunch Safari. If you still have the issue, post again.
Maybe you are looking for
-
Header 1 Header 2 i
-
Hi. I just spent 80 EUR's on a new apple trackpad and its a nightmare to upload which i never thought would happen with Apple. I am on 10.5.8 on a macbook and cannot update to 10.6.4 which is required. My system cannot see any updates. I have backed
-
Select a Row in a table and display the related in formation
I have a uix page displaying table "room" ,there are several patients in every room .What I want to do is: Using "SingleSelection" to select a room and display some attributes of this room and the related patients in a table with using another page.
-
How to change NLS_LANG setting of Oracle Application Server 10g R3
Hi I understand that NLS_LANG for OAS 10g can be set in three different places in the Windows registry \\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME ( there is no this key in my Windows 2003 server) – in the file opmn.xml the OC4J co
-
Illustrator CS3 crashes when trying to place an item
I'm running CS3 on an iMac running OS 10.5.8. Just recently (the past few days) my Illustrator has been crashing when I attempt to place a file. I've attempted to place a variety of files (.jpg, .eps, .PSD) and usually Illustrator would crash after s