Why can't I see my site normally in Design view?

I made a lot of changes to my hobby site when I converted to CSS and also changed the layout. The problem is this, now that it looks good in the Web browsers where I've tested it, it's gone crazy in the Dreamweaver Design view. Sepcifically, the text for the article shows up as a narrow column about 150 pixels wide on the far right side. Any suggestions? Here's a link to the site on the Web ...
http://www.keithpurtell.com/kthings/

#article {
float: right;
margin-right: 60px;
width: 570px; /*530*/
max-width: 85%;
/*max-width: 560px;*/
Disabling max-width in DW gave me an approximately correct result in DW Design View.
I didn't see any unexpected change in the browsers without that attribute either.
Don't know if that helps - just an observation.

Similar Messages

Why can't I see my text in CS5 design view?

Since upgrading to CS5, I cannot see any text but plain text as I work in design view. If I apply a css format to it, it disappears from view, but not from the code and shows up on the browser. But if I can't see it, and can't select it, I can't lay it out at all.
I have uploaded 2 different screen grabs of a simple page with the split view so that you can also see the code. -one is the regular design layout and then the split in Live View so that you can see what I mean. The text in in the code, is visible in Live View, but cannot be seen or selected in Design View. I have a MacBook running Snow Leopard.
http://channelsusan.com/disappearingtext.html
I posted this problem months ago and no one could figure it out. I have been using my old computer with CS in the meantime. Now I have time to address the issue and want to try again. So far I have reformatted my drive, reinstalled the operating system, unistalled and reinstalled CS5.
Please help me.

ednerid wrote:
Since upgrading to CS5, I cannot see any text but plain text as I work in design view. If I apply a css format to it, it disappears from view, but not from the code and shows up on the browser. But if I can't see it, and can't select it, I can't lay it out at all.
I have uploaded 2 different screen grabs of a simple page with the split view so that you can also see the code. -one is the regular design layout and then the split in Live View so that you can see what I mean. The text in in the code, is visible in Live View, but cannot be seen or selected in Design View. I have a MacBook running Snow Leopard.
http://channelsusan.com/disappearingtext.html
I posted this problem months ago and no one could figure it out. I have been using my old computer with CS in the meantime. Now I have time to address the issue and want to try again. So far I have reformatted my drive, reinstalled the operating system, unistalled and reinstalled CS5.
Please help me.
Is it only the <h> (heading) tags that you can't see in design view? From the screen shot it looks like you can view the <p> (paragraph) tag, right?

Why can't I drag images from Finder to Design View Dreamweaver CC?

Hey Guys,
I'm using OS X Mavericks (10.9) and Adobe DW CC
For some reason in both CC and CS6 I can no-longer drag files from Finder (Mac OS X's Explorer) into the design view ( for eg: adding images to a table cell ), the browse button doesn't work properly either... The "browse for file" button only works if there is an image already there and then it will update the image, otherwise if there's no image in the table cell it will bring up the browse dialogue box but does nothing if I select a file and press "open".
Is there a setting that was introduced in CS 6 that affects this behavior?

Hi All,
This bug has been fixed in the latest version of Dreamweaver CC 2014, which is now available for download.
Download it from https://creative.adobe.com/ or directly through the Creative Cloud desktop app.
We’re excited to hear back from you. Please share your feedback.

HT4597 Why can I only see new mail in icloud and not in my normal in box

Why can I only see new mail in icloud and not in my usual mail in box

sonnay, are you also in South Africa like the original poster whose message you tacked onto?
A lot of countries only have app store, no music or video stores. Because of copyright laws that are different between every nation. Stupid, that the laws are different, but that's the way it is.

Why can't I see my iPhoto files in iMovie?

[DISCLAIMER: My question is short, but my details are not. This is going to be a LONG read, but I wanted to make sure I provided all you helpful people with as much information as I could so that I could receive the best possible solution. So your patience and assistance is greatly appreciated!]
In iMovie [version 4.0.1], when I click on the Photo button to import pictures into my project from iPhoto, the following error message appears: "No photos were found. To use this feature, you must first create a photo library using iPhoto version 2.0 or later."
However... I AM using iPhoto [version 4.0.3]... with a HUGE Library containing 2000+ images and several created albums. These features work just fine within the confines of that program. They just aren't integrating with iMovie correctly. So... why can't I see my iPhoto files in iMovie?!!?!
FIRST ATTEMPT:
When I checked iMovie help, all it said was "You must open iPhoto at least one time on your computer to be able to access your iPhoto library from iMovie." I've obviously done this, having used the program plenty. Didn't work.
SECOND ATTEMPT:
When I checked this forum, the closest thread I could find that was similar to my problem suggested deleting the iMovie preferences file [com.apple.imovie3.plist]. It was later added that deleting the iPhoto preferences file [com.apple.iphoto.plist] as well had solved the problem immediately for that user. Tried it. Didn't work.
THIRD ATTEMPT:
When I checked the Apple Info site, their main solution was to try recreating the AlbumData.xml file which is used to populate the photo listing. Now this file can usually be found in the iPhoto library folder and I know how to recreate it. But THIS is where I think my main problem lies.
Unlike most users, my iPhoto Library is actually located on an external hard drive under "my hard drive name"/Pictures/iPhoto Library. When I checked this folder for the AlbumData.xml file , it simply did not exist. So as a test, I created a new iPhoto Library also on my external hard drive but the AlbumData.xml file was not created with it. I opened up iMovie just to see if it was able to browse the iPhoto library properly. But it still didn't work.
However, when I created a test iPhoto Library directly onto my Mac's hard drive, the AlbumData.xml file was indeed created with it. And when I opened up iMovie again... lo and behold, the iPhoto library finally appeared. It worked. But unfortunately, this solution still doesn't help me at all!
Thing is, I don't have enough space on my Mac's direct hard drive to move my entire iPhoto Library there (where it works). That's why I am using an external hard drive to store (more space). So is there ANY way I can keep my iPhoto Library located on my external hard drive and have the library, albums and files recognized in the other iLife applications like iMovie???
I feel I've tried everything, folks Could someone please please help me?!!?!
[my specs are listed below if that helps any]
Thanks in advance,
a very disgruntled wizkid :\
PowerBook G4 12" [1GHz, 256MB, 40GB] Mac OS X (10.3.9) GeForce FX Go5200 32MB, Matshita DVD-R UJ-816, Maxtor External Hard Drive [250GB, Firewire & USB 2.0]

My main concern at this point is that the AlbumData.xml file is unable to create itself onto the External HD. When I view the file [that I created from my test iPhoto Library on my Mac's HD] in finder, it appears to be a Final Cut Pro type of extension. Is something wrong with my External Hard Drive in that regard? Is it just incapable of storing those file types??? Hmmm...
As for the alias solution... instead of alias-ing the "Pictures" folder like you have, I've already tried creating an alias of the "iPhoto Library" folder on my External HD and placing it within the "Pictures" folder on my Mac. But when I tried to "Find Library" upon launching iPhoto, the prompt box would not allow me to choose the "iPhoto Library" alias I had created. So I couldn't open it.
To be honest, I'm not exactly sure how to create an alias correctly... or perhaps I should try alias-ing the actual "Pictures" folder (like you have) rather than just the "iPhoto Library" folder, but I don't know how to do that correctly either.
FYI... I am mounting my External HD before I launch iPhoto.
Also, I have also tried dragging the AlbumData.xml file that I created from the test iPhoto Library into my active iPhoto Library folder residing on my External HD. It would appear to be in the folder, but as soon as I clicked somewhere else in finder and than back into the folder, it would disappear. Not sure how to "point to it" either.
Karl, think maybe you could provide some hints on how to properly alias something or "point" to the AlbumData.xml file? I'd try it myself, but I don't wanna screw anything up by accident.
PS. As stated in the post above, there's a possibility my External HD is no longer Mac OS formatted... at which point I throw my hands up into the air and scream!
thanks for the tips thus far... everyone's so nice and helpful... I love it!
-the kid
PowerBook G4 12" [1GHz, 256MB, 40GB] Mac OS X (10.3.9) GeForce FX Go5200 32MB, Matshita DVD-R UJ-816, Maxtor External Hard Drive [250GB, Firewire & USB 2.0]

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

Why can't I see the layers of cs4 .psd files passed to me in photoshop elements 11?

why can't I see the layers from cs4 .psd files passed to me in photoshop elements 11?

You should be able to see normal layers, but PSE doesn't understand layer groups/sets or comp layers. The inexpensive add-on elements+ from simplephotoshop.com will let you expand layer groups. (If you also have Premiere Elements installed you should be able to see layer groups in PSE without adding anything.)

Why can't I see a discussion? Says unauthorised?

Why can't I see or reply on this discussion anymore?
Re: Poor support site
created by KiltedTim in Using iPhone - View the full discussion
This solved my question This helped me
Apple does not provide support via email. This forum is a volunteer user to user support forum. If all you want to do is rant, you're not going to get much help. If you wan help addressing specific issues, then ask a coherent question and someone here may be able to help you find the answer to your problems.
This solved my question This helped me
Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
Start a new discussion in the same community

Sorry, I thought this was Apple support

I know I have new mail why can't I see it in Apple Mail?

I know I have new mail why can't I see it in Apple Mail?

Oh.
This seems to be a common problem with Yahoo (search this site)
I only have one piece of advice to offer. Change your email provider to one that is not Yahoo.

Why can´t I see contacts and calendar events from my iPhone in my mac pro if I already registered it in the cloud?

Why can´t I see contacts and calendar events already registered in my iPhone, in my Mac Pro ? I already actualize LION OSX and selected these items in the adjustments menu of the icloud. I could do it just once, after I installed Lion OSX, but up to the moment it does not updates.

Assuming you activated iCloud, try going to Settings>iCloud and make sure Calendars and Contacts are set to ON.

HT1947 Why can't I see all songs for an artist when using iPad remote for home sharing music through apple tv.

Why can't I see all my songs for an artist when I search by artist using iPad remote? I'm listening to music via home sharing through apple tv using iPad 2 as my remote. All my songs seem to be listed fine under "songs", but when I select "artist" many of the songs I have for that artist are not there, any idea why that is or how I can fix this.....I suspect it's because many songs may not be associated with an album and it seems only songs in albums are displayed when I search by artist.

Thanks Ferretbite, but that's not the issue in my case, the songs are not part of a compilation. I just checked several of them and the "Part of a compilation" box is unchecked.....it seems as if the song does not have an album associated with it, it will not display under the artist when I search by artist on the iPad remote which REALLY stinks.
Hope someone else might have a solution.

When I click on a link from a web page opened in Safari I get a blank black screen. Why can't I see the contents of the page?

When I click on a link from a web page opened in Safari I get a blank black screen. Why can't I see the contents of the page?

Is this any link in any page, or one particular link in a particular page?

Why can't I see my external hard drive, Intel iMac / 500 GB, G-Drive

Why can't I see my external hard drive? I have a new iMac, Intel based i5, running Lion (2-3 months old). I have a 500 GB G-Drive external hard drive that has showed up when connected to my iMac for the past 2-3 months. Now it's gone. It's NOT visible when using Disk Utilities. I have all of the radio buttons chosen in the Finder Preferences. I've unplugged and replugged in the drive, have switched the cable ports and have switched firewire cable. The G-Drive powers up and whirls, so I don't believe the problem is with the drive. Yes, I set my Preferences to make sure ALL disk types are visible. I've restarted my iMac on a number of occations. I rest my SMC by totally unplugging my iMac for a minute, then plugging it back in. Any suggestions?

Unplug the HD, Zap the PRAM, reconnect the HD, power it up, and see if that fixes the problem. If not, then maybe the HDs bitten the dust. Try on another computer to verify.

Why can't I see an export value option in my radio button properties? I am using Acrobat X pro.

Why can't I see an export value option in my radio button properties? I am using Acrobat X pro.

Thanks so much. Thought it was just the name of the button and did not realize it was the value. Now able to use them for calculations.

I have downloaded and installed Photoshop Elements 11 on my new Macbook Pro. Why can't I see my scanner (Epson Perfection 3200 Photo) from the File Import menu?

I have downloaded and installed Photoshop Elements 11 on my new Macbook Pro. Why can't I see my scanner (Epson Perfection 3200 Photo) from the File>Import menu?

There was no driver update available (it said my driver was up to date), so I just deleted the scanner and restarted the computer. when it came up, the scanner had already been added again. With great anticipation I tried to import from Photoshop...but no luck (scanner was not visible). I finally ended up calling Epson (had great difficulty in locating a number for support) and they finally told me there is no driver update for OS X 10.10 and I should as a work around use "Image Capture" application. I tried it, and it works quite well.

Why can't I see my site normally in Design view?

Similar Messages

Maybe you are looking for