Why can't I see others in my home sharing, but they can see me?

I have set up my home sharing and my members can see my libraries, but I can not see their names, or libraries.  Why?

Howdy slrsij,
It sounds like for some reason you cannot see libraries on other devices but they can see your library just fine. I would recommend you perform troubleshooting steps 4-7 from the following article:
Troubleshooting Home Sharing
Thank you for using Apple Support Communities.
All the best,
Sterling

Similar Messages

  • TS2972 I can see my library on home sharing but  I can't see the music?,

    Help, I have turned on my homes sharing and can see the library on my iPad but cannot access any songs......my computer is on and signed in.....if I re touch the screen I just get the msg home sharing cannot be turned on....but it is as its seeing my library!

    You are saying that is is seeing your library but you can't play music. Do you see the songs, albums and so on in the library? Did you try closing the Music App completely and launch it again?
    Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice. Launch the Music app again.
    Sometimes it helps if you reboot the iPad when mysterious problems arise.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I can listen to the Music Library in my Ipad through home sharing, but I can't do it in my Iphone. When Iphone managed to connect my Mac, I can see how a watch turns clockwise but it stops when it arrives at a half of the watch. What can I do?

    I can listen to the Music Library in my Ipad through home sharing, but I can't do it in my Iphone. When Iphone managed to connect my Mac, I can see how a watch turns clockwise but it stops when it arrives at a half of the watch. What can I do?

    Hi there,
    You may want to take a look at some of the troubleshooting steps found in the article below.
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Hope that helps,
    Griff W.

  • My iPhone 5 screen is completely black.  I can hear it working (you can hear Siri if you push the home key) but I can't see anything.

    My iPhone 5 screen is completely black.  I can hear it working (you can hear Siri if you push the home key) but I can't see anything.  I've tried a hard reset but that hasn't worked.  Any other ideas?  I have a call in to get a replacement but it won't come in until next week so until then I don't have a working phone!

    Reset, hold both Home and Power buttons until the iPhone restarts. This usually takes about 10 seconds of holding both buttons.

  • So, I have created my home sharing from my base computer to my laptop. On my lap top I see the tab for home sharing but it will not let me connect to my computer to share my music over. I have done everything iTunes has told me to but it still won't work.

    So, I have created my home sharing from my base computer to my laptop. On my lap top I see the tab for home sharing but it will not let me connect to my computer to share my music over. I have done everything iTunes has told me to but it still won't work. Any help would make my day...

    I got some more info that may help.
    I put a cd on my laptop, and was able to share it to my computer... So the problem is only from my computer to my laptop. I tried the firewall thing and it did not help. I read the rest of the trouble shooting page, and nothing else applies. iTunes is an execption and already was. I can not think of anything else being my problem. Do you think I should re-install iTunes or would that be a waste of time? At this point I am about to just call Apple for some help because I am getting to stressed over this.
    Thanks

  • My new iPhone 5 cwon't charge.  I see others have had this problem but I can't find the solution to it

    My new iPhone 5 won't charge.  I see others have had this problem , but how do you solve it?

    Select
    Safari ▹ Preferences ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them and test.

  • I have an external hard drive with a shared music folder, which I can access (from Home Sharing) and play music on my Windows computer. On my new Mac, I can see the drive in Home Sharing but not play any music. What's the solution?

    I have an external network hard drive with a shared music folder (WD MyBookLive), which I can access from Home Sharing and play music on my Windows computers. On my new Mac, I can see the drive and the music in Home Sharing but the tracks will not play. All the other authorized computers in my home network show up in Home Sharing and I can play the content. What's the solution?

    Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

  • Why can I not see other libraries in Home Sharing?

    I have tried EVERYTHING! I cannot figure out why my mac and PC will not communicate. I have authorized both computers with the same Apple ID and Home Sharing log in is all the same for both computers. I have turned off firewalls on both computers. They are signed into the same network. BUT there is still nothing under the Home Sharing tab of the menu bar. Can anyone please help! Thanks

    check out these links:
    Troubleshooting security software issues
    Troubleshooting Home Sharing
    and, last but not least, see this discussion concerning bonjour being the culprit.

  • I can't see the other person when using facetime but they can see me just fine, how can i fix this?

    When I use facetime with my fiance on my brand new macbook air she can see me but I can't see her. Please help me remedy this problem, I have verified that I am logged into facetime and connected it with both my ipone5 and my email but haven't seen any changes.  It is a 1 week old macbook air and I'm assuming it has the latest iOS installed but don't know how to check as this is my first Macbook.  Thank you for your help

    Frogmanian wrote:
    It is a 1 week old macbook air and I'm assuming it has the latest iOS installed but don't know how to check as this is my first Macbook.
    MacBook Air does not run iOS.  It runs OS X (pronounced as in OS - ten).  You can check which version you have by clicking the Apple logo in the upper left of the menu bar, then "About This Mac".  The current version is OS X 10.8.4.  If you do not have that version, you can click "Software Update" just below the "About This Mac" entry under the Apple logo.
    Anyway, typically, the reason for the FaceTime behavior you're describing is a less-than-robust internet WiFi connection.

  • HT202213 my mac can see windows home sharing but windows cant see my mac home sharing?

    Hi,
    I have set up home sharing on a mac and a windows pc. My mac ITunes is showing the 'sharing' menu with my windows pc listed however the windows ITunes isn't showing the 'sharing' menu........ can anyone assist please?
    thanks

    DIngo Dave 69 wrote:
    I am running Snow Leopard and on my seperate windows 7 machine I can see and connect to my mac. However I cannot get the Mac to connect to the Windows 7 machine. Even home sharing is not working on itunes.
    Can anyone help?
    Maybe
    On the Win7 machine,
    1. Ignore everything to do with Homegroup.
    2. Go > Computer > Users > User; right click on User and chose Share with > Specific people; and Set to share with a specific individual or Everyone—both with Read/Write permission.
    3. Go Control Panel > Network and Sharing Options > Advanced sharing Settings, and Turn on network discovery, Turn on file and printer sharing, Turn off public folder sharing , and Turn off password protected sharing (unless sharing won’t occur without turning it on).
    4. Restart (probably not necessary, but I’d do it).
    On the Sno machine,
    1. Go System Preferences > Sharing > Check File sharing > Go Options > Enable SMB sharing.
    2. Go System Preferences > Network > Select Airport or Ethernet depending on what you are going to be using. I am assuming you will be using wireless below. Let me know if not true.
    3. Having selected Airport, select ask to join new networks and show Airport status in menu bar.
    4. Click advanced > click remember networks this computer has joined > Click Wins > Enter the ip address of your Win7 machine in the WINS server box > Enter the Win7's workgroup name in the workbook box unless it already is there (look in the drop down menu too). In all likelihood the name is workgroup, but check on the Win7 machine.
    5. Restart (probably not necessary, but I’d do it).
    Try to connect to your Win7. Use Go menu > Connect to server. In trying to connect, type smb://ipaddress (of the Win7 machine). If, for some reason, you are asked to, input a user name and password, then use you user name and password for the Win7. Don't save anything to Keychain now and actually never for making network connections.

  • HT202213 I'm trying to set up "Home sharing" but i can not get into my old computer because of a virus. The old has Vista and an older version of iTunes. The new has Windows 7. Also this is my sons computer however I have made a new user account for me. H

    I Have 2 issues;
    1.  I can't transfer my iTunes library from my old computer which I can't get into due to a virus. I'm trying to transfer my iTunes folder to my sons computer in which I now have a user account. Old is Vista and new is Windows 7. Therefore home sharing is impossible, right?  Wrong?
    2.  I found my purchases from iTunes on my iPhone 4S. I can't seem to download them. There is no button to tap "download".  Also, I'm unable to sync to iTunes because my phones default is to sync to my old computer which will not open!

    Contact Apple customer support, they can reset your authorizations.
    http://www.apple.com/contact

  • I can't get the audio Playhead menu to appear so I can trim an audio segment in a secondary audio track.  I see others are having Trimming Issues, but I can't even get the menu to appear.....

    I need to trim off the front and back of audio segments (pulling from iTunes)
    The instructions seems quite clear on how to do this, but the Playhead Control does not appear when selecting and item in the secondary audio track.  It seems pretty basic, but how do I even get the Playhead to appear?
    I'm in hurry to finish a slideshow for a wedding (why I bought it to begin with) - any help will be appreciated.

    That's the for the secondary track.  But how do I trim the primary audio song from itunes.  I did find a work around. 
    select  the song in itunes.
    command + I to get the information screen.
    Under one of the tabs there is a "start" and "end" timer.  Trial and error will put allow you to start and stop at the time specifed.
    I renamed it " trimmed" so I knew it was a timmed version...then I inserted it into aperture the normal way...
    A pain, but it works...

  • I can see music on home sharing, but I can not copy the music from the imac, to macbook?

    I can see and play the music from the imac, on the macbook. However, I want to add the music to the library on the macbook so I can have it even when the macbook is not "in range" for homesharing? How can I copy the shared liabary to the macbook?
    Thank you.

    To clarify my issue diesel vdub i updated itunes to 10.7 version after that every time i select some of my songs and click get info, it shows me a message that i tunes can't find the songs original location  and a ! icon appears on the song selected after that. all my songs are in a external hard drive and it is connected to the pc and i can acces it but i really don't know what's wrong with the itunes or what it is

  • Can i help u? i had bought camfrog pro app by itunes...i see that app is upgrade now. but i can not upgrade that app...i can see this message "can not open by This id" i don't know why can not upgrade camfrog pro by my korea id? plz answer me

    can i help u? i had bought camfrog pro app by itunes...i see that app is upgrade now. but i can not upgrade that app...i can see this message "can not open by This id" i don't know why can not upgrade camfrog pro by my korea id? plz answer me

    To Update the App you have to Use the Same Apple ID it was Purchased with...

  • Can't see the other person, but they can see me. A...

    i was wondering if it is possible, this person i believe uses a Android or Iphone, for the camera to be turned off for video chat? I can never see the other person but they can see me - and i can see myself during the video chat. My video which they see i also see takes up the whole screen. This issue also is the same for when i use Windows and video chat with this person.

    Hello pfierrobb:
                You have to enable it in SKYPE.  Open up Sykpe click on tools then select options . When that windows opens select video settings. Then you well see select webcam click on White box select your web cam choices. Windos 7 HP computers it is called HP web camra filter. I just close out the filter stuff if I am not using it during chat session. Some HP computers call it cybrlink web cam.  If your web cam isn't listed yet the web cam still works in other applications your Skype software might be corrupted. Just uninstall Sykpe and reinstated it back with a new copy download  http://www.skype.com/en/download-skype/skype-for-computer/   If you are still having issues please let us know. Thank you frrw. 

Maybe you are looking for

  • PPCO0007 User Exit for  Changing Header Fields During Order  (CO40)

    .. Hi !!!!   I need your help or suggestions,   I need to change the standar order  before to save, i found the user exit PPCO0007,   i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are   lost, and

  • Please help me with the logic

    Hi All, I have a number on the selection-screen.I need to prepare a structure with fields equal to the number provided on the selection screen.please help me with it. Thanks in advance, kushagra sharma

  • "Entering Power Save Mode"

    Hi guys. I have an HP desktop and a Dell SR2320L Monitor. It was working fine until a few months back. I was out of town, came back last week and now every time I start my PC it just stays there "Entering Power Save Mode". I tried almost everything r

  • Limit Password Characters in Portal?

    We have EP 6.0 Stack 9 installed.  Is there a method to limit the characters used in usernames and passwords to non-Unicode characters?  We have a filtering mechanism that only works with the Latin-1 character so we want to limit characters to that c

  • 'Connection Description for Remote Database not found' Error

    Hi All, I have an interface that loads Oracle DB from an Oracle source(JD Edwards). It is mostly one to one mapping of the columns, and is utilizing LKM Oracle to Oracle(DBLink), IKM Oracle Incremental Update and CKM Oracle. I am getting an error whe